--- /dev/null
+# plugin info
+#
+# Name of plugin followed by: and then description.
+# Additional lines start with a blank/tab.
+#
+1080 to 480: Extracts 2 1920x540 fields from image,
+ resizes, and combines to 1920x480.
+1080 to 540: Extracts 2 1920x540 fields from image,
+ resizes, and combines to 1920x540.
+AgingTV: Use to achieve an "old" movie or TV show
+ effect by adding moving lines and snow.
+Auto Scale: Automatically scale to a specified size.
+Blue Banana: Used for color transformation or
+ remapping; also for chroma-key filtering.
+Blur: Blurs a video track in the horizontal or
+ vertical in chosen color channels.
+Brightness/Contrast: Use to change the brightness or
+ contrast; could reduce quality.
+BurningTV: Makes your video "burn" by adding small
+ light colored patches.
+C41: Converts C-41 negative film into the positive image.
+Chroma key: Erases pixels which match chosen color;
+ replaces with black or transparency.
+Chroma key (HSV): Removes a color with another color or
+ transparency using HSV variables.
+Color 3 Way: Modify color of Shadows, Midtones, and Highlights as
+ wanted.
+Color Balance: Modify RGB colors or white balance to compensate
+ compensate for errors in video.
+CriKey: Regionally based chroma key with interpolation;
+ only a specific zone defined.
+Decimate: Drop frames from a track which are most similar
+ in order to reduce frame rate.
+Deinterlace: Various line replication to eliminate comb
+ artifacts in interlaced video.
+Deinterlace-CV: Variation of deinterlacing video to eliminate comb
+ artifacts.
+Delay Video: Delay the video by some number of seconds.
+Denoise video: Clear the video of noise.
+Difference key: Creates transparency in areas which are similar
+ between 2 frames; must be applied to 2 tracks.
+DotTV: Puts various size dots over the picture to simulate
+ tv effect.
+Downsample: Reduce the sie of an image by throwing out data,
+ reducing sampling rate.
+Edge: Display only the edges of the video throughout the image.
+Fields to frames: Reads frames at 2x the framerate, combining 2
+ input frames into 1 interlaced output frame.
+Flip: Flip a portion of a video track from left to right,
+ up to down or vice versa.
+Frames to Fields: Extracts 2 interlaced fields stored in alternating
+ lines & outputs them as full frames.
+Freeze Frame: Lowest numbered frame in highlighted area will play
+ in the entire region.
+Gamma: Converts the logarithmic colors to linear colors
+ using gamma and maximum value.
+Gradient: Overlays a smooth color gradient on top of every
+ video frame.
+Histogram: Shows the number of occurrences of each color on a
+ histogram plot.
+Histogram Bezier: Uses a Bezier curve (parametric) on the histogram plot.
+HolographgicTV: Holographic tv effect.
+Hue saturation: Use to change hue, saturation and value parameters.
+Interpolate Pixels: Works only for float color models.
+Interpolate Video: Create illusion of higher frame rate video of low
+ framesrates by averaging over time.
+Inverse Telecine: Effective deinterlacing tool for use on a video
+ transfer of a film.
+Invert Video: Method of reversing the colors of a video track.
+Lens: Create the effect of looking through a lens.
+Linear Blur: Blur with parameters of length, andle, number of
+ steps, and which channels.
+Live Video: Reads video directly from the capture card input and
+ will replace current.
+Loop video: Loop video by specifying the length of the region to loop.
+Motion: Tracks translation and rotation motion to stabilize
+ shaky video.
+Motion 2 Point: Motion stabilization using 2 pass tracking.
+Motion Blur: Uses X/Y camera automation vectors to apply a linear
+ blur trailing camera direction.
+Motion51: Compensates for unwanted motion and stabilizes the
+ image using a unique curve/spline algorithm. Has a
+ reset option to use default parameters.
+MotionCV: Motion tracking/stabilization from the community
+ version of cinelerra.
+MotionHV: Motion tracking/stabilization from the original
+ author of cinelerra.
+Oil Painting: Makes video tracks appear as a painting.
+Overlay: Combine tracks via an overlayer that puts images on
+ top of a bottom layer.
+Perspective: Allows you to change the viewpoint of an object.
+Polar: Bends and warps your video in strange ways based on
+ a mathematical algorithm.
+RGB - 601: Used to reduce/increase contrast in your video via
+ 601 compression or RGB expansion.
+RGBShift: Align 3 separate planes of R, G, B if misaligned in
+ in the video or just shift for interest.
+Radial Blur: Creates a whirlpool based on settings that simulates
+ a swirling camera.
+ReframeRT: Changes number of frames in a sequence of video
+ directly from timeline.
+Reroute: Selectively transfer the alpha channel or the
+ RGB/YUV components from source to target track.
+Reverse video: Reverse media on the timeline in realtime.
+Rotate: Rotate the video in degree increments around a
+ pivot point or reverse and flip the video.
+SVG via Inkscape: Allow the manipulation of an SVG image with
+ Inkscape without having to exit the program.
+Scale: Reduce or expand the image size depending on the ratio.
+Scale Ratio: Manipulate your video to maintain the pixel aspect
+ ratio (proportional geometry).
+Selective Temporal Averaging: Smooths out non-moving areas of a video
+ clip by averaging the color across frames.
+Sharpen: Sharpen the video, either the luminance, horizontal,
+ or interlace.
+ShiftInterlace: Shift the interlace lines using odd or even.
+Swap Frames: Swap frames with 0-1, 2-3, 4-5... or 1-2, 3-4, 5-6...
+Swap channels: Swap R,G,B,Alpha with another color channel.
+Threshold: Converts the image to pure luminanceand replaces
+ pixels with 1 of 3 colors.
+Time Average: Takes a number of frames to average or
+ accumulate-stacking 1 frame on top of another.
+TimeFront: Performs spatio-temporal video warping.
+Title: Add text/timestamp/background pngs to video with
+ many nice variations such as changing font color,
+ size, bold, subscripts.
+Translate: Allows displacing, cropping and/or scaling video
+ horizontally/vertically.
+Unsharp: Applies a traditional darkroom technique, unsharp
+ mask, to every video frame.
+VideoScope: Summarizes intensity and color on a calibrated display.
+Wave: Generates waves in video using Amplitude, Phase, and
+ Wavelength.
+Whirl: Creates a whirl (spiral) of the video around the center.
+YUV: Modify the Y, U, V settings.
+YUV411: Modify the 411 yuv to look like 420 color space instead.
+YUVShift: Realign the 3 sets of YUV inputvideo nubers when
+ misaligned.
+Zoom Blur: Blur the video and use a zoom effect.
+#
+# Description of FFmpeg Video Plugins
+#
+F_atadenoise: Apply an Adaptive Temporal Averaging Denoiser.
+F_avgblur: Apply average blur filter.
+F_bbox: Compute bounding box for each frame.
+F_bench: Benchmarks part of a filtergraph.
+F_bitplaneoise: Measure bit plane noise.
+F_blackdetect: Detect video intervals that are (almost) black.
+F_blackframe: Detect frames that are (almost) black.
+F_boxblur: Blurs the input video.
+ Through the settings you are
+ able to change the power and the
+ radius of the boxblur applied to luma, chroma and alpha.
+F_bwdif: Deinterlaces the input image.
+F_chromakey: Turns a certain color into
+ transparency. Operates on YUV colors.
+F_ciescope: Video CIE scope.
+F_colorbalance: Adjusts the color balance.
+F_colorchannelmixer: Adjusts colors by mixing color channels.
+F_colorkey: Turns a certain color into
+ transparency. Operates on RGB colors.
+F_colorlevels: Adjusts the color levels.
+F_colormatrix: Converts color matrix.
+F_cover_rect: Find and cover a user specified object.
+F_crop: Crops the input video.
+F_cropdetect: Auto-detect crop size
+F_datascope: Video data analysis.
+F_deband: Debands video.
+F_deflate: Applies deflate effect.
+F_dejudder: Removes judder produced by pullup.
+F_delogo: Removes logo from input video.
+ When using this plugin a green box will appear on the
+ screen, once the logo is inside the box the
+ plugin will hide it. Through the settings you can specify
+ the position of the logo to hide (on a X-Y axis)
+ and the size of the box (so you can adjust it to the
+ size of the logo).
+F_deshake: Stabilizes shaky video.
+F_dilation: Applies dilation effect.
+F_drawbox: Draws a colored box on the input video.
+ Through the settings you are able to choose the
+ position of the box on X and Y coordinates,
+ the size of the box,
+ the color and the thickness of the lines.
+F_drawgraph: Draw a graph using input video metadata.
+F_drawgrid: Draws a colored grid on the input video.
+ Through the settings you can select the
+ horizontal and the vertical offset,
+ set the width and height of
+ the grid cell, and the color and
+ thickness of the lines.
+F_edgedetect: Detects and draws edge.
+F_elbg: Apply posterize effect, using the ELBG algorithm.
+F_eq: Adjusts brightness, contrast, gamma and saturation.
+F_erosion: Applies erosion effect.
+F_fade: Fade in/out input video.
+F_fftfilt: Apply arbitrary expressions to pixels in frequency domain.
+F_field: Extract a field from the input video.
+F_fieldorder: Set the field order.
+F_framerate: Upsamples or downsamples progressive
+ source between specified frame rates.
+F_fspp: Applies Fast Simple Post-processing filter.
+F_gblur: Apply Gaussian Blur filter.
+F_gradfun: Debands video quickly using gradients.
+F_hflip: Horizontally flips the input video.
+F_histeq: Applies global color histogram equalization.
+F_histogram: Computes and draws a histogram.
+F_hqdn3d: Applies a High Quality 3D Denoiser.
+F_hqx: Scales the input by 2,
+ 3 or 4 using the hq*x magnification algorithm.
+F_hue: Adjust the hue and saturation of the input video.
+F_idet: Interlace detect Filter.
+F_il: Deinterleaves or interleaves fields.
+F_inflate: Applies inflate effect.
+F_interlace: Convert progressive video into interlaced.
+F_kerndeint: Applies kernel deinterlacing to the input.
+F_lenscorrection: Rectifies the image by correcting for lens distortion.
+F_loop: Loops video frames.
+F_lut: Compute and apply a lookup
+ table to the RGB/YUV input video.
+F_lutrgb: Compute and apply a lookup table to the RGB input video.
+F_lutyuv: Combine and apply a lookup table to the YUV input video.
+F_mcdeint: Applies motion compensating deinterlacing.
+F_mestimate: Generate motion vectors.
+F_mpdecimate: Remove near-duplicate frames.
+F_negate: Negates input video.
+F_nlmeans: Non-local means denoiser.
+F_noise: Adds noise to the video.
+ Through the settings you can
+ select the variables of the noise
+ (strength, flag and seed).
+F_owndenoise: Denoises using wavelets.
+F_perms: Set permissions for the output video frame.
+F_perspective: Corrects the perspective of video.
+F_phase: Phases shift fields.
+F_pp: Filters video using libpostproc.
+F_pp7: Applies Postprocessing 7 filter.
+F_prewitt: Apply prewitt operator.
+F_readeia608: Read EIA-608 Closed Caption codes from
+ input video and write them to frame metadata.
+F_readvitc: Reads vertical interval
+ timecode and writes it to frame metadata.
+F_realtime: Slows down filtering to match realtime.
+F_removegrain: Removes grain.
+F_repeatfields: Hard repeat fields based on MPEG repeat field flag.
+F_rotate: Rotates the input image.
+F_sab: Applies shape adaptive blur.
+F_separatefields: Split input video frames into fields.
+F_showinfo: Show textual information for each video frame.
+F_shuffleframes: Shuffles video frames.
+F_shuffleplanes: Shuffles video planes.
+F_signalstats: Separates statistics from video analysis.
+F_smartblur: Blurs the input video without impacting
+ the outlines. Through the settings you can
+ select the radius,
+ the strength and the threshold of luma and chroma.
+F_sobel: Applies sobel operator.
+F_spp: Applies a simple post processing filter.
+F_stereo3d: Converts video stereoscopic 3D view.
+F_super2xsai: Scales the input by 2x using
+ the Super2xSal pixel art algorithm.
+F_swaprect: Swaps 2 rectangular objects in video.
+F_swapuv: Swaps U and V components.
+F_tinterlace: Performs temporal field interlacing.
+F_transpose: Transposes input video.
+F_uspp: Applies Ultra Simple/Slow Post-processing filter.
+F_vaguedenoiser: Applies a Wavelet based Denoiser.
+F_vectorscope: Video vectorscope.
+F_vflip: Flips the input video vertically.
+F_vignette: Makes or reverses a vignette effect.
+ Through the settings you can set the circle center
+ position on a X-Y axis,choose the angle,
+ the aspect and set the dithering of the vignette.
+F_w3dif: Applies Martin Weston three field deinterlace.
+F_waveform: Video waveform monitor.
+F_weave: Weaves input video fields into frames.
+F_xbr: Scales the input using xBR algorithm.
+F_yadif: Deinterlaces the input image.
+F_zoompan: Applies Zoom & Pan effect.
+#
+# Description of FFmpeg Audio Plugins
+#
+F_abench: Benchmark part of a filtergraph.
+F_acompressor: Audio compressor.
+F_acrusher: Reduces audio bit resolution.
+F_adelay: Delays one or more audio channels.
+F_aecho: Adds echoing to the audio.
+F_aemphasis: Audio emphasis.
+F_aeval: Filters audio signal according to a specific expression.
+F_afade: Fades in/out input audio.
+F_agate: Audio gate.
+F_allpass: Applies a two-pole all-pass filter.
+F_aloop: Loops audio samples.
+F_anoisesrc: Generates a noise audio signal.
+F_aperms: Set permissions for the output audio frame.
+F_aphaser: Adds a phasing effect to the audio.
+F_arealtime: Slows down filtering to match realtime.
+F_aresample: Resamples audio data.
+F_astats: Shows time domain statistics about audio frames
+F_atempo: Adjusts audio tempo.
+F_atrim: Pick one continuous section from the input, drop the rest.
+F_bandpass: Applies a two-pole Butterworth band-pass filter.
+F_bandreject: Applies a two-pole Butterworth band-reject filter.
+F_bass: Boosts or cuts lower frequencies.
+F_biquad: Applies a biquad IIR filter with the given coefficents.
+F_chorus: Adds a chorus effect to the audio.
+F_compand: Compresses or expands audio dynamic range.
+F_compensationdelay: audio compensation delay line.
+F_crystalizer: Simple Expand Audio Dynamic Range filter.
+F_dcshift: Applies a DC shift to the audio.
+F_dyaudnorm: Dynamic Audio Normalizer. When using this plugin,
+ be sure to “attach effect” to all audio tracks by dragging
+ the plugin to the 1st audio track and then right mouse
+ clicking all subsequent audio tracks which brings up an menu.
+ Highlight the effect shown in the middle section and click OK.
+F_earwax: Widens the stereo image. When using this plugin,
+ be sure to “attach effect” to all audio tracks by dragging
+ the plugin to the 1st audio track and then right mouse
+ clicking all subsequent audio tracks which brings up an menu.
+ Highlight the effect shown in the middle section and click OK.
+F_equalizer: Applies two-pole peaking equalization (EQ) filter.
+F_extrastereo: Increases difference between stereo audio
+ channels. When using this plugin, be sure to
+ “attach effect” to all audio tracks by dragging
+ the plugin to the 1st audio track and then right mouse
+ clicking all subsequent audio tracks which
+ brings up an menu. Highlight the effect shown in the
+ middle section and click OK.
+F_flanger: Applies a flanging effect to the audio.
+F_highpass: Applies a high-pass filter with 3dB point frequency.
+F_loudnorm: EBU R128 loudness normalization.
+F_lowpass: Applies a low-pass filter with 3dB point frequency.
+F_silenceremove: Removes silence.
+F_sine: Generate sine wave audio signal.
+F_stereotools: Applies various stereo tools. When using this plugin,
+ be sure to “attach effect” to all audio tracks by dragging
+ the plugin to the 1st audio track and then right mouse
+ clicking all subsequent audio tracks which brings up an menu.
+ Highlight the effect shown in the middle section and click OK.
+F_stereowiden: Applies stereo widening effect. When using this plugin,
+ be sure to “attach effect” to all audio tracks by dragging
+ the plugin to the 1st audio track and then right mouse
+ clicking all subsequent audio tracks which brings up an menu.
+ Highlight the effect shown in the middle section and click OK.
+F_treble: Boosts or cuts upper frequencies.
+F_tremolo: Applies tremolo effect.
+F_vibrato: Applies vibrato effect.
+F_volume: Change input volume.
+#
+# audio plugins
+#
+#AM pitchshifter:
+#Aliasing:
+#Allpass delay line, cubic spline interpolation:
+#Allpass delay line, linear interpolation:
+#Allpass delay line, noninterpolating:
+#Analogue Oscillator:
+#4 x 4 pole allpass:
+#Artificial latency:
+#Audio Divider (Suboctave Generator):
+#AudioScope:
+#Auto phaser:
+#Barry's Satan Maximiser:
+#Bode frequency shifter:
+#Bode frequency shifter (CV):
+#Chebyshev distortion:
+#Comb Filter:
+#Comb Splitter:
+#Comb delay line, cubic spline interpolation:
+#Comb delay line, linear interpolation:
+#Comb delay line, noninterpolating:
+#Compressor:
+#Constant Signal Generator:
+#Crossfade:
+#Crossfade (4 outs):
+#Crossover distortion:
+#DC Offset:
+#DC Offset Remover:
+#DJ EQ:
+#DJ EQ (mono):
+#DJ flanger:
+#Decimator:
+#Declipper:
+#Delay audio:
+#Delayorama:
+#Denoise:
+#DenoiseFFT:
+#Despike:
+#Diode Processor:
+#Dyson compressor:
+#EQ Graphic:
+#EQ Parametric:
+Echo: Add echoing to audio for an interesting effect.
+EchoCancel: Remove echos from audio in order to
+ improve the quality.
+#Exponential signal decay:
+#FM Oscillator:
+#Fast Lookahead limiter:
+#Fast overdrive:
+#Flanger:
+#Foldover distortion:
+#Fractionally Addressed Delay Line:
+#Freeverb:
+#Frequency tracker:
+#GLAME Butterworth Highpass:
+#GLAME Butterworth Lowpass:
+#GSM simulator:
+#GVerb:
+#Gain:
+#Gate:
+#Giant flange:
+#Glame Bandpass Analog Filter:
+#Glame Bandpass Filter:
+#Glame Butterworth X-over Filter:
+#Glame Highpass Filter:
+#Glame Lowpass Filter:
+#Gong beater:
+#Gong model:
+#Hard Limiter:
+#Harmonic generator:
+#Hermes Filter:
+#Higher Quality Pitch Scaler:
+#Hilbert transformer:
+#Impulse convolver:
+#Interpolate:
+#Invert Audio:
+#Inverter:
+#Karaoke:
+#L/C/R Delay:
+#LFO Phaser:
+#LS Filter:
+Live Audio: Reads audio directly from the soundcard input,
+ replacing any audio on track.
+#Loop audio:
+#Mag's Notch Filter:
+#Matrix Spatialiser:
+#Matrix; MS to Stereo:
+#Matrix; Stereo to MS:
+#Modulatable delay:
+#Mono to Stereo splitter:
+#Multiband EQ:
+#Multivoice Chorus:
+#Nonbandlimited single-sample impulses (Frequency; Control):
+#Overlay:
+#Pitch Scaler:
+Pitch shift: Uses FFT to try to change the pitch without
+ changing the duration.
+#Plate reverb:
+#Pointer cast distortion:
+#Rate shifter:
+#Remove Gaps:
+#ResampleRT:
+#Retro Flanger:
+#Reverb:
+#Reverse Delay (5s max):
+Reverse audio: Play the audio backwards.
+#Ringmod with LFO:
+#Ringmod with two inputs:
+#SC1:
+#SC2:
+#SC3:
+#SC4:
+#SC4 mono:
+#SE4:
+#Signal sifter:
+#Simple amplifier:
+#Simple delay line, cubic spline interpolation:
+#Simple delay line, linear interpolation:
+#Simple delay line, noninterpolating:
+#Sine + cosine oscillator:
+#Single band parametric:
+#Sinus wavewrapper:
+#Smooth Decimator:
+#SoundLevel:
+#Spectrogram:
+#State Variable Filter:
+#Step Demuxer:
+#Surround matrix encoder:
+#Synthesizer:
+#Tape Delay Simulation:
+#Time Stretch RT:
+#Transient mangler:
+#Triple band parametric with shelves:
+#Valve rectifier:
+#Valve saturation:
+#Vocoder:
+#Vocoder:
+#VyNil (Vinyl Effect):
+#Wave Terrain Oscillator:
+#z-1: