# plugin info
#
# Name of plugin followed by: and then description.
-# Additional lines start with a blank/tab.
-#
+# Additional lines start with 2 tabs.
+# Lines should be less than 70 characters long.
+#123456789012345678901234567890123456789012345678901234567890123456789
+# For usage/readability, a period (.) creates space.
1080 to 480: Extracts 2 1920x540 fields from 1920x1080
image, resizes them separately, and
combines them to 1920x480 interlaced image.
Edge: Display only the edges of the video throughout the image.
Fields to frames: Reads frames at 2x the framerate, combining 2
input frames into 1 interlaced output frame.
+FindObj: Locate a specific object in a scene and replace with
+ another object. This uses OpenCV thirdparty package.
Flip: Flip a portion of a video track from left to right,
up to down or vice versa.
+FlowObj: Retards image motion as shown with optical flow. Uses
+ the OpenCV thirdparty package.
Frames to Fields: Extracts 2 interlaced fields stored in alternating
lines & outputs them as full frames.
Freeze Frame: Lowest numbered frame in highlighted area will play
in the entire region.
+GaborObj: Creates an interesting fractalius-like image effect.
+ Uses the OpenCV thirdparty package.
Gamma: Converts the logarithmic colors to linear colors
using gamma and maximum value.
Gradient: Overlays a smooth color gradient on top of every
video frame.
+HistEq: Remap colors using blended histogram weights.
Histogram: Shows the number of occurrences of each color on a
histogram plot.
Histogram Bezier: Uses a Bezier curve (parametric) on the histogram plot.
HolographgicTV: Holographic tv effect.
Hue saturation: Use to change hue, saturation and value parameters.
-Interpolate Pixels: Works only for float color models.
+Interpolate Bayer: Uses Bayer filter algorithm to interpolate (estimate)
+ missing color information.
Interpolate Video: Create illusion of higher frame rate video of low
framesrates by averaging over time.
Inverse Telecine: Effective deinterlacing tool for use on a video
version of cinelerra.
MotionHV: Motion tracking/stabilization from the original
author of cinelerra.
+MoveObj: Move and stabilize object using OpenCV 3rd party pkg.
Oil Painting: Makes video tracks appear as a painting.
Overlay: Combine tracks via an overlayer that puts images on
top of a bottom layer.
Reverse video: Reverse media on the timeline in realtime.
Rotate: Rotate the video in degree increments around a
pivot point or reverse and flip the video.
+Rumbler: Jiggle space and time at a given rate for dream-like video.
SVG via Inkscape: Allow the manipulation of an SVG image with
Inkscape without having to exit the program.
Scale: Reduce or expand the image size depending on the ratio.
Sharpen: Sharpen the video, either the luminance, horizontal,
or interlace.
ShiftInterlace: Shift the interlace lines using odd or even.
+Sphere Cam: Converts a fisheye image into a panoramic projection.
Swap Frames: Swap frames with 0-1, 2-3, 4-5... or 1-2, 3-4, 5-6...
Swap channels: Swap R,G,B,Alpha with another color channel.
Threshold: Converts the image to pure luminance and replaces
F_datascope: Video data analysis.
F_deband: Debands video.
F_deflate: Applies deflate effect.
+F_deflicker: Remove temporal frame luminance variations.
F_dejudder: Removes judder produced by pullup.
F_delogo: Removes logo from input video.
When using this plugin a green box will appear on the
and the size of the box (so you can adjust it to the
size of the logo).
F_deshake: Stabilizes shaky video.
+F_despill: Remove unwanted foreground colors, caused by reflected color
+ of green or blue screen.
F_dilation: Applies dilation effect.
+F_doubleweave: Weave input video fields into double number of frames.
F_drawbox: Draws a colored box on the input video.
Through the settings you are able to choose the
position of the box on X and Y coordinates,
F_edgedetect: Detects and draws edge.
F_elbg: Apply posterize effect, using the ELBG algorithm.
F_eq: Adjusts brightness, contrast, gamma and saturation.
+F_entropy: Measure video frames entropy.
F_erosion: Applies erosion effect.
F_fade: Fade in/out input video.
F_fftfilt: Apply arbitrary expressions to pixels in frequency domain.
F_field: Extract a field from the input video.
F_fieldorder: Set the field order.
+F_fillborders: Fill borders of the input video.
+F_floodfill: Fill area of the same color with another color.
F_framerate: Upsamples or downsamples progressive
source between specified frame rates.
F_fspp: Applies Fast Simple Post-processing filter.
F_interlace: Convert progressive video into interlaced.
F_kerndeint: Applies kernel deinterlacing to the input.
F_lenscorrection: Rectifies the image by correcting for lens distortion.
+F_limiter: Limit pixels components to the specified range.
F_loop: Loops video frames.
+F_lumakey: Turns a certain luma into transparency.
F_lut: Compute and apply a lookup
table to the RGB/YUV input video.
+F_lut3d: Apply a 3D LUT (look up table) to an input video.
F_lutrgb: Compute and apply a lookup table to the RGB input video.
F_lutyuv: Combine and apply a lookup table to the YUV input video.
F_mcdeint: Applies motion compensating deinterlacing.
F_mestimate: Generate motion vectors.
F_mpdecimate: Remove near-duplicate frames.
F_negate: Negates input video.
-F_nlmeans: Non-local means denoiser.
+F_nlmeans: Non-local means denoiser. An example usage is for the
+ recovery of VHS tapes which look bad.
F_noise: Adds noise to the video.
Through the settings you can
select the variables of the noise
(strength, flag and seed).
+F_normalize: Normalize RGB video.
+F_owdenoise: Denoises using wavelets.
+F_oscilloscope: 2D video oscilloscope. Useful to measure spatial impulse,
+ step responses, and chroma delays.
F_owndenoise: Denoises using wavelets.
F_perms: Set permissions for the output video frame.
F_perspective: Corrects the perspective of video.
F_phase: Phases shift fields.
+F_pixscope: Pixel data analysis for checking color and levels. It will
+ display sample values of color channels.
F_pp: Filters video using libpostproc.
F_pp7: Applies Postprocessing 7 filter.
F_prewitt: Apply prewitt operator.
+F_pseudocolor: Make pseudocolored video frames.
F_readeia608: Read EIA-608 Closed Caption codes from
input video and write them to frame metadata.
F_readvitc: Reads vertical interval
F_realtime: Slows down filtering to match realtime.
F_removegrain: Removes grain.
F_repeatfields: Hard repeat fields based on MPEG repeat field flag.
+F_roberts: Apply roberts cross operator which performs a simple/quick 2-D
+ spatial gradient measurement on the video (usually a graysacle
+ image). It highlights regions of high spatial frequency which
+ most likely correspond to edges.
F_rotate: Rotates the input image.
F_sab: Applies shape adaptive blur.
F_separatefields: Split input video frames into fields.
+F_setrange: Force color range for the output video frame.
F_showinfo: Show textual information for each video frame.
F_shuffleframes: Shuffles video frames.
F_shuffleplanes: Shuffles video planes.
F_swaprect: Swaps 2 rectangular objects in video.
F_swapuv: Swaps U and V components.
F_tinterlace: Performs temporal field interlacing.
+F_tlut2: Compute and apply a lookup table from 2 successive frames.
F_transpose: Transposes input video.
F_uspp: Applies Ultra Simple/Slow Post-processing filter.
F_vaguedenoiser: Applies a Wavelet based Denoiser.
F_vectorscope: Video vectorscope.
F_vflip: Flips the input video vertically.
+F_vfrdet: Variable frame rate detect filter.
F_vignette: Makes or reverses a vignette effect.
Through the settings you can set the circle center
position on a X-Y axis,choose the angle,
#
F_abench: Benchmark part of a filtergraph.
F_acompressor: Audio compressor.
+F_acontrast: Simple audio dynamic range compression/expansion filter.
F_acrusher: Reduces audio bit resolution.
F_adelay: Delays one or more audio channels.
F_aecho: Adds echoing to the audio.
F_chorus: Adds a chorus effect to the audio.
F_compand: Compresses or expands audio dynamic range.
F_compensationdelay: audio compensation delay line.
+F_crossfeed: Apply headphone crossfeed which blends the left and right
+ channels of a stereo audio recording. It is mainly used
+ to reduce extreme stereo separation of low frequencies in
+ order to produce more speaker like sound.
F_crystalizer: Simple Expand Audio Dynamic Range filter.
F_dcshift: Applies a DC shift to the audio.
+F_drmeter: Measure audio dynamic range where setting window length in
+ seconds is used to split audio into segments of equal length.
F_dyaudnorm: Dynamic Audio Normalizer. When using this plugin,
be sure to “attach effect” to all audio tracks by dragging
the plugin to the 1st audio track and then right mouse
brings up an menu. Highlight the effect shown in the
middle section and click OK.
F_flanger: Applies a flanging effect to the audio.
+F_haas: Apply Haas Stereo Enhancer for a more natural sounding pan effect
+ or more clarity in the center of the mix. With this filter
+ applied to mono signals it give some directionality and stretches
+ its stereo image
F_highpass: Applies a high-pass filter with 3dB point frequency.
+F_hilbert: Generate a Hilbert transform FIR coefficients.
F_loudnorm: EBU R128 loudness normalization.
F_lowpass: Applies a low-pass filter with 3dB point frequency.
+F_mcompand: Multiband compress or expand audiodynamic range. The input audio
+ is divided into bands which is like the crossover of a loudspeaker,
+ resulting in flat frequency response when absent compander action.
F_silenceremove: Removes silence.
F_sine: Generate sine wave audio signal.
F_stereotools: Applies various stereo tools. When using this plugin,
IrisSquare: Video switches segments via a small rectangular view
that gradually grows to full size.
Shape Wipe: Wipe a specific shape across the video. Available
- shapes are: circle, clock, heart, tile2x2h, tile2x2v.
+ shapes are: burst, circle, clock, heart, specks, spiral,
+ tile2x2h, tile2x2v.
Slide: Image slides into view - can set: Left/Right/In/Out.
Wipe: Wipe the image across screen starting left or right.
Zoom: Zoom out video at X/Y magnification for some seconds.