int cursor_y = get_relative_cursor_y();
if( get_cursor_over_window() &&
- cursor_x >= 0 && cursor_y >= 0 &&
+ cursor_x >= 0 && cursor_y >= 0 &&
cursor_x < get_w() && cursor_y < get_h() )
{
//printf("TrackCanvas::drag_motion %d %d\n", __LINE__, pane->number);
// will be deleted by Edits::optimize if not used
double length = mwindow->edl->session->default_transition_length;
int64_t start = edit->startproject+edit->length;
- int64_t units = track->to_units(length, 1);
+ int64_t units = track->to_units(length, 1);
track->edits->create_silence(start, start+units);
continue;
}
double asset_duration = 0;
int64_t asset_length_units = 0;
int64_t position = 0;
-
+
if(mwindow->session->current_operation == DRAG_ASSET &&
mwindow->session->drag_assets->total) {
Indexable *indexable = mwindow->session->drag_assets->values[0];
if (video_length < 0) {
if(mwindow->edl->session->si_useduration)
video_length = mwindow->edl->session->si_duration;
- else
- video_length = 1.0 / mwindow->edl->session->frame_rate ;
+ else
+ video_length = 1.0 / mwindow->edl->session->frame_rate ;
}
asset_duration = video_length / indexable->get_frame_rate();
}
else {
printf("DRAG_ASSET error: Asset dropped, but both drag_clips and drag_assets total is zero\n");
}
-
+
asset_length_units = mwindow->session->track_highlighted->to_units(asset_duration, 1);
position = drop_edit_position (&insertion, NULL, asset_length_units);
if( position == -1 ) {
result = 1;
break; // Do not do anything
}
-
+
double position_f = mwindow->session->track_highlighted->from_units(position);
Track *track = mwindow->session->track_highlighted;
// // FIXME, we should create an mwindow/EDL method that overwrites, without clearing the keyframes and autos
// // Unfortunately, this is _a lot_ of work to do right
// printf("Problematic insertion\n");
-// mwindow->edl->tracks->clear(position_f,
+// mwindow->edl->tracks->clear(position_f,
// position_f + asset_duration, 0);
// }
mwindow->paste_assets(position_f, track, !insertion);
result = 1;
break; // Do not do anything
}
-
+
double position_f = mwindow->session->track_highlighted->from_units(position);
Track *track = mwindow->session->track_highlighted;
mwindow->move_edits(mwindow->session->drag_edits,
}
// Get the x coordinate
- x = Units::to_int64(position *
+ x = Units::to_int64(position *
mwindow->edl->session->sample_rate /
- mwindow->edl->local_session->zoom_sample) -
+ mwindow->edl->local_session->zoom_sample) -
mwindow->edl->local_session->view_start[pane->number];
double paste_position = -1.;
{
int64_t x1 = Units::round(mwindow->edl->session->brender_start *
mwindow->edl->session->sample_rate /
- mwindow->edl->local_session->zoom_sample -
+ mwindow->edl->local_session->zoom_sample -
mwindow->edl->local_session->view_start[pane->number]);
if(MWindowGUI::visible(x1, x1 + 1, 0, get_w()))
{
}
int64_t x2 = Units::round(mwindow->edl->session->brender_end *
mwindow->edl->session->sample_rate /
- mwindow->edl->local_session->zoom_sample -
+ mwindow->edl->local_session->zoom_sample -
mwindow->edl->local_session->view_start[pane->number]);
if(MWindowGUI::visible(x2, x2 + 1, 0, get_w()))
int grouptype = automation.autogrouptype(i, track);
if(draw) // Do dropshadow
result = do_float_autos(track, autos,
- cursor_x, cursor_y, draw,
+ cursor_x, cursor_y, draw,
buttonpress, 1, 1, MDGREY,
auto_keyframe, grouptype);
case Autos::AUTOMATION_TYPE_INT: {
if(draw) // Do dropshadow
result = do_int_autos(track, autos,
- cursor_x, cursor_y, draw,
+ cursor_x, cursor_y, draw,
buttonpress, 1, 1, MDGREY,
auto_keyframe);
result = do_int_autos(track, autos,
}
-void TrackCanvas::draw_floatauto(FloatAuto *current,
- int x,
- int y,
- int in_x,
- int in_y,
- int out_x,
- int out_y,
- int center_pixel,
+void TrackCanvas::draw_floatauto(FloatAuto *current,
+ int x,
+ int y,
+ int in_x,
+ int in_y,
+ int out_x,
+ int out_y,
+ int center_pixel,
int zoom_track,
int color)
{
draw_box(x1, y1, x2 - x1, y2 - y1);
}
-// show bezier control points (only) if this
+// show bezier control points (only) if this
// floatauto doesn't adjust it's tangents automatically
if(current->curve_mode != FloatAuto::FREE &&
current->curve_mode != FloatAuto::TFREE)
y += center_pixel;
cp_y += center_pixel;
-
+
// drawing the tangent as a dashed line...
int const dash = HANDLE_W;
int const gap = HANDLE_W / 2;
float sx = 3 * (cp_x - x) / 4.;
float ex = 0;
-
+
// q is the x displacement for a unit line of slope
float q = (sx > 0 ? 1 : -1) / sqrt(1 + slope * slope);
-
+
float dist = 1/q * sx;
if( dist > dash )
ex = sx - q * dash;
-
+
set_color(color);
- do {
+ do {
float sy = slope * sx, ey = slope * ex;
draw_line(quantize(sx + x), quantize(sy + y), quantize(ex + x), quantize(ey + y));
sx = ex - q * gap;
}
-inline
+inline
float levered_position(float position, float ref_pos)
{
- if( 1e-6 > fabs(ref_pos) || isnan(ref_pos))
+ if( 1e-6 > fabs(ref_pos) || isnan(ref_pos))
return 0.0;
return ref_pos / position;
}
int TrackCanvas::test_floatauto(FloatAuto *current, int x, int y, int in_x,
- int in_y, int out_x, int out_y, int center_pixel, int zoom_track,
+ int in_y, int out_x, int out_y, int center_pixel, int zoom_track,
int cursor_x, int cursor_y, int buttonpress, int autogrouptype)
{
int result = 0;
if( WITHIN(x1,x2,y1,y2))
{ // cursor hits node
result = 1;
-
+
if(buttonpress && (buttonpress != 3))
{
INIT_DRAG(current->position, value_to_percentage(current->get_value(), autogrouptype))
// could be ctrl-click or ctrl-drag
// click would cycle through tangent modes
((FloatAuto*)current)->toggle_curve_mode();
-
+
// drag will start dragging the tangent, if applicable
INIT_DRAG(current->position, value_to_percentage(current->get_value(), autogrouptype))
mwindow->session->drag_handle = 0;
}
}
-
+
float lever = 0.0; // we use the tangent as a draggable lever. 1.0 is at the ctrl point
// Test in control
#undef WITHIN
#undef INIT_DRAG
-// if(buttonpress)
-// printf("TrackCanvas::test_floatauto 2 drag_handle=%d ctrl_down=%d cursor_x=%d cursor_y=%d x1=%d x2=%d y1=%d y2=%d\n",
+// if(buttonpress)
+// printf("TrackCanvas::test_floatauto 2 drag_handle=%d ctrl_down=%d cursor_x=%d cursor_y=%d x1=%d x2=%d y1=%d y2=%d\n",
// mwindow->session->drag_handle,
// ctrl_down(),
// cursor_x,
(int)ax, (int)ax2, cursor_x, cursor_y,
buttonpress, autogrouptype);
}
- if( draw )
+ if( draw )
draw_floatline(center_pixel,
(FloatAuto*)previous, (FloatAuto*)current,
(FloatAutos*)autos, unit_start, zoom_units, yscale,
// not really editing the node, rather start editing the curve
// tangent is editable and drag movement is significant
if( (FloatAuto::FREE == current->curve_mode ||
- FloatAuto::TFREE==current->curve_mode) &&
+ FloatAuto::TFREE==current->curve_mode) &&
(fabs(x) > HANDLE_W / 2 || fabs(y) > HANDLE_W / 2))
mwindow->session->drag_handle = x < 0 ? 1 : 2;
}
if(value != old_value || position != current->position) {
result = 1;
- float change = value - old_value;
+ float change = value - old_value;
current->adjust_to_new_coordinates(position, value);
synchronize_autos(change, current->autos->track, current, 0);
show_message(current, 1,", %.2f", current->get_value());
double position_f = current->autos->track->from_units(current->position);
double center_f = (mwindow->edl->local_session->get_selectionstart(1) +
- mwindow->edl->local_session->get_selectionend(1)) /
+ mwindow->edl->local_session->get_selectionend(1)) /
2;
if(!shift_down())
{
//PluginAutos *pluginautos = (PluginAutos *)current->autos;
PluginSet *pluginset;
Plugin *plugin = 0;
-// figure out the correct pluginset & correct plugin
+// figure out the correct pluginset & correct plugin
int found = 0;
for(int i = 0; i < track->plugin_set.total; i++)
{
currentkeyframe;
currentkeyframe = (KeyFrame *) currentkeyframe->next)
{
- if (currentkeyframe == current)
+ if (currentkeyframe == current)
{
found = 1;
break;
}
-
+
}
- if (found) break;
+ if (found) break;
}
- if (found) break;
+ if (found) break;
}
mwindow->session->plugin_highlighted = plugin;
double position_f = current->autos->track->from_units(current->position);
double center_f = (mwindow->edl->local_session->get_selectionstart(1) +
- mwindow->edl->local_session->get_selectionend(1)) /
+ mwindow->edl->local_session->get_selectionend(1)) /
2;
if(!shift_down())
{
switch(mwindow->session->current_operation)
{
case DRAG_FADE:
-
+
break;
}
}
// Extend a border
if(shift_down())
{
- double midpoint = (mwindow->edl->local_session->get_selectionstart(1) +
+ double midpoint = (mwindow->edl->local_session->get_selectionstart(1) +
mwindow->edl->local_session->get_selectionend(1)) / 2;
if(position < midpoint)
// Que the CWindow
rerender = 1;
}
-
+
return rerender;
}
double TrackCanvas::time_visible()
{
- return (double)get_w() *
- mwindow->edl->local_session->zoom_sample /
+ return (double)get_w() *
+ mwindow->edl->local_session->zoom_sample /
mwindow->edl->session->sample_rate;
}
FloatAuto::curve_name(((FloatAuto*)current)->curve_mode));
}
char string2[BCTEXTLEN];
- Units::totext(string2,
+ Units::totext(string2,
current->autos->track->from_units(current->position),
mwindow->edl->session->time_format,
mwindow->edl->session->sample_rate,
// else
// return gui->pane[BOTTOM_LEFT_PANE]->patchbay;
// }
-//
+//
// return 0;
// }
projects / goodguy / history.git / blobdiff