\begin{itemize}
\item Format frame rates choices are $29.97$ or $25$ for SD, based on the user's timezone, with NTSC 29.97/US or PAL 25 /EU. For BD, the media input will be analyzed to automatically pick the default format or if unknown, the user's timezone will be used to default to $1920/29.97i$ for US or $1920/25i$ for EU. Be sure to set the rendering parameters in the \texttt{settings $\rightarrow$ format} menu.
\item Choose audio stereo or 5.1, again depending on your media.
- \item Target Geometry will be $720\times480$ (US) or $720\time576$ (EU) for SD.
+ \item Target Geometry will be $720\times480$ (US) or $720\times576$ (EU) for SD.
\end{itemize}
\textit{Step 2}: From the main window, select \texttt{file $\rightarrow$ BD Render} or select \texttt{file $\rightarrow$ DVD Render} (figure~\ref{fig:bluray_dvd}). Then:
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.9\linewidth]{dvd-batch01.png}
+ \includegraphics[width=1.0\linewidth]{dvd-batch01.png}
\caption{Batch render for DVD creation}
\label{fig:dvd-batch01}
\end{figure}
% \vspace{-4ex}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{dvd-batch02.png}
+ \includegraphics[width=1.0\linewidth]{dvd-batch02.png}
\caption{Batch render for BD creation}
\label{fig:dvd-batch02}
\end{figure}
Editing in the Line Text box can be used to change the active script line. By double clicking the timeline over the subtitle track, you can reselect the active script line. The subtitle text will be reloaded into the Line Text box and can be edited and re-pasted as the new active subtitle text. You can also highlight multiple lines in the Script Text box and paste them (using the usual window paste methodology) into the Line Text box. After pasting to the timeline, the Line Text box will be updated with the next script line. In addition, if you triple click a line in the \textit{Script Text} box, it will automatically become the current line in the \textit{Line Text} box.
-When you are finished, before clicking \textit{Save}, you must supply a legitimate filename in the \textit{Path} box; your current directory will be used if only a filename but no directory path is supplied. The filename used will automatically have a "--" after it followed by the \textit{track label} and then \textit{udvd} extension added; any extension in the filename will be removed.. If you click OK before saving, the subtitle script position is saved with the session. This is convenient for continuing where you left off.
+When you are finished, before clicking on \textit{Save}, you can specify the output format using the \textit{Format} drop-down button. You can choose between the classic \texttt{.udvd} (micro DVD) and the more universally supported \texttt{.srt} (subrip) and \texttt{.sub} (subviewer). The next step is to provide a legitimate filname in the \textit{Path} box; your current directory will be used if only a filename but no directory path is supplied. The filename used will automatically have a "--" after it followed by the \textit{track label} and then \textit{udvd} extension added; any extension in the filename will be removed.. If you click OK before saving, the subtitle script position is saved with the session. This is convenient for continuing where you left off.
-\noindent To reposition the script, use the slider or tumbler buttons:
-
-\textit{Slider} bar to move through the text entries quickly.
+To reposition the script, use the slider or tumbler buttons:
+\textit{Slider} bar to move through the text entries quickly. \\
\textit{Prev} or \textit{Next} buttons to go to the previous or next script line.
-\noindent Figure~\ref{fig:subtitle02} shows what the pasted subtitle script looks like in a portion of the main window.
-
\begin{figure}[htpb]
- \centering
- \includegraphics[width=0.9\linewidth]{subtitle02.png}
- \caption{Subtitles on timeline}
- \label{fig:subtitle02}
+ \centering
+ \includegraphics[width=1.0\linewidth]{subtitle02.png}
+ \caption{Subtitles on timeline}
+ \label{fig:subtitle02}
\end{figure}
+Figure~\ref{fig:subtitle02} shows what the pasted subtitle script looks like in a portion of the main window.
+
\section{Dvd Interlaced Chroma}%
\label{sec:dvd_interlaced_chroma}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{dvd-title.png}
+ \includegraphics[width=0.9\linewidth]{dvd-title.png}
\caption{Title menu for DVD/BD}
\label{fig:dvd-title}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=1.0\linewidth]{dvd03.png}
+ \includegraphics[width=0.8\linewidth]{dvd03.png}
\caption{Set Scale Ratio to Cropped}
\label{fig:dvd03}
\end{figure}
Keep in mind that the monitor you are using is NOT the intended output display device -- your digital TV is, which most likely will have different looking aspect/pixels, etc.
\begin{enumerate}[start=11]
- \item In order to \textit{crop} the bottom of the video in order to preserve all of the image on the top, modify the Src Y value on the bottom of the left hand side in the Scale Ratio plugin. Src Y which was $21$ has now been changed to $-18$. You will see in the Compositor window how the bottom dark colored border is now gone so that none of the top portion which contains a person's head will be chopped off. Compare figure~\ref{fig:dvd04} to figure~\ref{fig:dvd03} and note the blue legs can be now seen to the waist.
+ \item In order to \textit{crop} the bottom of the video in order to preserve all of the image on the top, modify the Src Y value on the bottom of the left hand side in the Scale Ratio plugin. Src Y which was $21$ has now been changed to $-18$. You will see in the Compositor window how the bottom dark colored border is now gone so that none of the top portion which contains the Bunny's head will be chopped off. Compare figure~\ref{fig:dvd04} to figure~\ref{fig:dvd03} and note the Bunny's head.
\end{enumerate}
\begin{figure}[htpb]
\centering
- \includegraphics[width=1.0\linewidth]{dvd04.png}
+ \includegraphics[width=0.8\linewidth]{dvd04.png}
\caption{Better scale on compositor}
\label{fig:dvd04}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.9\linewidth]{dvd-batch05.png}
+ \includegraphics[width=1.0\linewidth]{dvd-batch05.png}
\caption{Error in Batch Render}
\label{fig:dvd-batch05}
\end{figure}
projects / goodguy / cin-manual-latex.git / blobdiff