\label{fig:editing-effects}
\end{figure}
-To edit effects, you can move the timeline cursor over the effect borders until it changes to a resize left or resize right icon. In this state, if you drag the end of the effect, it performs an edit just like dragging an edit edge. The five editing behaviors of track trimming \index{trimming} apply to effect trimming and they are bound to the mouse buttons that you set in interface preferences as shown in the previous screencast. \textit{Trimming} simply means changes the duration dragging the edges.
+To edit effects, you can move the timeline cursor over the effect borders until it changes to a resize left or resize right icon. In this state, if you drag the end of the effect, it performs an edit just like dragging an edit edge. The five editing behaviors of track trimming \index{trim} apply to effect trimming and they are bound to the mouse buttons that you set in interface preferences as shown in the previous screencast. \textit{Trimming} simply means changes the duration dragging the edges.
When you perform a trim edit on an effect, the effect boundary is moved by dragging it. Unlike track editing, the effect has no source length. You can extend the end of an effect as much as you want. Also unlike track editing, the starting position of the drag operation does not bind the edit decision to media. The media the effect is bound to does not follow effect edits. Other effects, however, do follow editing decisions made on an effect. You can disable effects from being subject to the edit decisions by using the pulldown \textit{Settings} and toggling off Edit effects. If you drag the end of an effect which is lined up to effects on other tracks, the effects on the other tracks will be edited while the media stays the same. When you drag an effect in from the Resources window you can insert the effect in the portion of the row unoccupied by the trimming operation. In some cases you will want a trimming operation to change only one row of effects. This can be achieved by first positioning the insertion point on the start or end of the effect. Then press the shift key while beginning the trimming operation. This causes the operation to change only one row of effects.
\label{fig:drag-effect}
\end{figure}
+\section{Copy/Paste Effects}%
+\label{sec:copy_paste_effects}
+\index{plugins!copy paste effects}
+
+In \textit{Drag and Drop} mode we can copy and paste edits containing plugins (see also \nameref{sub:copy_paste_behavior}). Start by selecting an edit (that contains plugins) with LMB and open the context menu with MMB. The possibilities offered are:
+
+\begin{description}
+ \item[Ctrl - c]: copy edits and plugins to buffer.
+ \item[Ctrl - v]: paste edits and plugins into the timeline (splice) at the Insertion point.
+ \item[Ctrl - b]: paste edits and plugins into the timeline (overwrite) at the Insertion point.
+ \item[Ctrl - Shift - p]: paste only the plugins into the timeline, at the Insertion point, keeping the original length (overwrite).
+ \item[Collect Effects]: copy only plugins into buffer.
+ \item[Paste Effects]: pastes the plugins into a selected target edit. The length of the plugins adapts to the length of the edit.
+\end{description}
+
\section{Shared Effects and Shared Tracks}%
\label{sec:shared_effect_tracks}
\index{plugins!shared effect}
\label{sub:denoisefft}
\index{denoisefft}
-Noise removal from audio using FFT editing. Set the Denoise Power dial in dB and choose the number of reference samples.
+Audio sampling (time data) is converted to a frequency spectrum using FFT (\textit{Fast Fourier Transform}). Since the \textit{reference} contains only the background noise while the rest of the clip contains noise + audio to clean up, you get separate frequencies so you can subtract them to get the clean audio only. Set the Denoise Power dial in dB and choose the number of reference samples.
+
+For example, if you record a voice with a microphone\protect\footnote{credit fary54}:
+\begin{enumerate}
+ \item You record 15 seconds of background (without talking). This is represent the background noise that the filter uses as a reference.
+ \item After 15 seconds, start the voice. This is represents the recording whose filter should remove the background noise.
+ \item You stop recording.
+ \item You place the FFT effect on the whole length of the recording (including the 15 seconds of background noise).
+ \item Then place your cursor at the beginning of the 15 seconds. Enter the number of samples in the effect presets, e.g. 65536.
+\end{enumerate}
+
+This has the effect of creating a keyframe that marks the beginning of the reference range, mentioned in point 1, which in our example ends at 65536 samples later.
+
+During playback, the background noise is then automatically removed along the entire length of the effect.
\subsection{Despike}%
\label{sub:despike}
Loop some number of samples of audio over and over.
-\subsection{Overlay}%
+\subsection{Overlay (Audio)}%
\label{sub: overlay}
\index{overlay audio}
export LADSPA_PATH=/usr/lib/ladspa
\end{lstlisting}
-\section[Audio LV2 / Calf Plugins]{Audio LV2 / Calf Plugins\protect\footnote{Optional Feature - OS dependent}}%
+\section[Audio LV2 / Calf Plugins]{Audio LV2 / Calf Plugins}%
\label{sec:audio_lv2_calf_plugins}
\index{LV2 - Calf}
-LV2 is an open standard for audio plugins using a simple interface with extensions which add functionality to support audio software. These plugins were written by external developers and provide additional audio effects to \CGG{} audio without having to change \CGG{} every time. Because the LV2 plugins are separate from \CGG{} Infinity, if one fails or does not perform as expected, \CGG{} should stay running and you will have to contact the programmers responsible for that plugin for a fix.
+LV2\protect\footnote{Optional Feature - OS dependent} is an open standard for audio plugins using a simple interface with extensions which add functionality to support audio software. These plugins were written by external developers and provide additional audio effects to \CGG{} audio without having to change \CGG{} every time. Because the LV2 plugins are separate from \CGG{} Infinity, if one fails or does not perform as expected, \CGG{} should stay running and you will have to contact the programmers responsible for that plugin for a fix.
Typically, a user OS has specialized package groups installed. It is difficult to create one build of \CGG{} to accommodate all potential LV2 plugins. Specifically for the \textit{Calf-Studio LV2 plugins}, you should install the \textit{Calf Plugins} package. The user’s computer must have \textit{gtk-2-runtime} installed, which seems to be automatically done already for most distros. For users doing their own builds, you can build \CGG{} without LV2 support by including \texttt{-{}-without-lv2} in the configure step. The default build is \texttt{-{}-with-lv2=yes} and requires that \textit{GTK-2-devel} must be installed or the build will fail and notify you. In addition for some newer distros, you will need to install
\textit{lv2-calf-plugins-gui}; for example Fedora version 32.
Makes your video burn where there are small light colored patches of video. This came from \url{https://effectv.com}.
-\subsection[C41]{C41\protect\footnote{credit Florent Delannoy, original program code author, and Edouard Chalaron}}%
+\subsection[C41]{C41}%
\label{sub:c41}
\index{C41}
-The C41 plugin takes a $16\,bit C41$ digital intermediate negative film as input and outputs a positive image. It became necessary because $C-41$ negatives can fade or color-shift over time which was a problem early on. It is still important today because there is a large amount of documentaries, video clips, and other media out there that was shot on super $16$ film. This works for RGB-float, RGB, and also YUV variations.
+The C41\protect\footnote{credit Florent Delannoy, original program code author, and Edouard Chalaron} plugin takes a $16\,bit C41$ digital intermediate negative film as input and outputs a positive image. It became necessary because $C-41$ negatives can fade or color-shift over time which was a problem early on. It is still important today because there is a large amount of documentaries, video clips, and other media out there that was shot on super $16$ film. This works for RGB-float, RGB, and also YUV variations.
There are two sets of data -- the scanned input values and your corrected values. Simple functionality of the plugin is to compute the data, transform to get corrected values, then apply that.
Normally threshold is very low when using a high slope. The two parameters tend to be exclusive because slope fills in extra threshold. The slope tries to soften the edges of the chroma key but it does not work well for compressed sources. A popular softening technique is to use a maximum slope and chain a blur effect below the chroma key effect to blur just the alpha.
-\subsection[Chroma Key (HSV)]{Chroma Key (HSV)\protect\footnote{Credit for Plugin by Jerome Cornet \url{http://jcornet.free.fr/linux/chromakey.html}}}%
+\subsection[Chroma Key (HSV)]{Chroma Key (HSV)}%
\label{sub:chroma_key_hsv}
\index{chroma key HSV}
-Chroma Key (HSV) (figure~\ref{fig:chroma-key-hsv}) replaces a color with another color or transparency using HSV variables; it is frequently used to remove a color from a video to composite with another image. This process is generally referred to as green screen or blue screen process (because of the color that is keyed out). More information: {\small \url{http://en.wikipedia.org/wiki/Chromakey}}
+Chroma Key (HSV)\protect\footnote{Credit for Plugin by Jerome Cornet \url{http://jcornet.free.fr/linux/chromakey.html}} (figure~\ref{fig:chroma-key-hsv}) replaces a color with another color or transparency using HSV variables; it is frequently used to remove a color from a video to composite with another image. This process is generally referred to as green screen or blue screen process (because of the color that is keyed out). More information: {\small \url{http://en.wikipedia.org/wiki/Chromakey}}
\begin{figure}[htpb]
\centering
\label{sub:foreground}
\index{foreground}
-Whatever the visual content of the frame, the Foreground plugin application applies a uniform color that can be chosen by color picker; color wheel; color presets; the various HSV, RGB, YUV sliders or by entering the hexadecimal value. The alpha slider is not missing either.
+Whatever the visual content of the frame, the Foreground plugin application applies a uniform color that can be chosen by color picker, color wheel, color presets, or by entering the hexadecimal value.
+In addition there are HSV, RGB, YUV, and alpha sliders to vary the color accordingly.
\subsection{Frames to fields}%
\label{sub:frames_to_fields}
This effect makes video tracks appears as a painting. It can be controlled by \textit{Radius} slider and \textit{intensity of colors} can be chosen as an option.
-\subsection{Overlay}%
+% Leave the Video and Audio parenthesis due to latex2html dual conflict
+\subsection{Overlay (Video)}%
\label{sub:overlay}
\index{overlay video}
The \textit{Polar} effect bends and warps your video in weird ways. Mathematically, it converts your video from either \textit{polar} coordinates to \textit{rectangular} coordinates, or the reverse. With the Clear buttons we can bring the slider to default values without affecting the other parameters.
+\subsection{Posterize}%
+\label{sub:posterize}
+\index{posterize}
+
+Reduces the color depth so as to decrease the displayed color gradients, up to the bands typical of posterization. It is used by setting the number of \textit{steps} from 0 to 255.
+
\subsection{RGB-601}%
\label{sub:rgb-601}
\index{rgb-601}
\textit{Rate} allows you to choose the type of algorithm to use when switching between the start and end bands. You can reverse the direction with the \textit{Invers} button. The three modes are: \textit{Linear}, \textit{Log} or \textit{Quadratic} (exponential). This is a warping framework plugin based on this article: {\small \url{http://www.vision.huji.ac.il/videowarping/HUJI-CSE-LTR-2005-10_etf-tr.pdf}}
+\subsection{Timelapse Helper}%
+\label{sub:timelapse_helper}
+\index{timelapse helper}
+
+It is used to get a timelapse quickly and easily. It sets the number of frames to be skipped during playback. The default value of \textit{Number of Frames x block} is 10; playback (and rendering) displays frames 1 - 10 - 20 - ... and not the intermediate ones.
+
\subsection{Title}%
\label{sub:title}
\index{title}
The location for most User installs is:
-\hspace{4em}\texttt{<cinlib\_path>/plugins/}
+\hspace{4em}\texttt{<cinlib\_path>/plugins/video}
Location for some System installs is:
-\hspace{4em}\texttt{/usr/lib/cin/plugins/} (most ubuntu distros)
+\hspace{4em}\texttt{/usr/lib/cin/plugins/video} (most ubuntu distros)
-\hspace{4em}\texttt{/usr/lib64/cin/plugins/} (Leap distro)
+\hspace{4em}\texttt{/usr/lib64/cin/plugins/video} (Leap distro)
\subsection{How to Build OpenCV Plugins}%
\label{sub:how_build_opencv_plugins}
FFmpeg’s plugin guide is at the link:
\href{https://ffmpeg.org/ffmpeg-filters.html}{ffmpeg-filters}.
-\subsection{FFmpeg Audio Plugins\protect\footnote{credit to WPfilmmaker}}%
+\subsection{FFmpeg Audio Plugins}%
\label{sub:ffmpeg_audio_plugins}
\index{ffmpeg!audio plugin}
-The following is a list of the integrated audio plug-ins.
+The following is a list of the integrated audio plug-ins\protect\footnote{credit to WPfilmmaker} .
\begin{description}
\item [F\_abench]~\\Benchmark part of a filtergraph.
\item [F\_acompressor]~\\Audio compressor.
\item [F\_volumedetect]~\\Detect audio volume.
\end{description}
-\subsection{FFmpeg Video Plugins\protect\footnote{credit to WPfilmmaker}}%
+\subsection{FFmpeg Video Plugins}%
\label{sub:ffmpeg_video_plugins}
\index{ffmpeg!video plugins}
-The following is a list of the integrated video plug-ins.
+The following is a list of the integrated video plug-ins \protect\footnote{credit to WPfilmmaker} .
\begin{description}
\item [F\_addroi]~\\Mark a region of interest in a video frame.
\item [F\_amplify]~\\Amplify changes between successive video
projects / goodguy / cin-manual-latex.git / blobdiff