Incorporated SGE html needed items and corrections + more index entries by Andrea

[goodguy/cin-manual-latex.git] / parts / Recording.tex

diff --git a/parts/Recording.tex b/parts/Recording.tex
index 4a69ef208a2b408f8480e3ba5562fc388c85e4f8..4884ec1b72a78ebde5bbb1055204f80146b8ce6c 100644 (file)
--- a/parts/Recording.tex
+++ b/parts/Recording.tex
@@ -294,7 +294,7 @@ If you have setup for DVB capture as outlined in the section above, just start h
 
 \begin{itemize}
     \item From the main window use  \texttt{File $\rightarrow$ Record}   to request  the \textit{Recording} application.
-    \item In the \textit{Video In} window, press the down arrow on the left to see the channel pulldown.
+    \item In the \textit{Video In} window, press the down arrow on the left to see the \textit{Channel} pulldown.
     \item Select the desirable channel, and watch TV.  You will have to enable the audio by checking the \textit{Monitor audio} in the Recording window for sound.
 \end{itemize}
 
@@ -382,7 +382,7 @@ Dual screen mode is useful for displaying \CGG{} video/project on a large screen
 
 The main menu pulldown, \texttt{Settings $\rightarrow$ Preferences $\rightarrow$ Playback A} and \texttt{B} Tabs, must be properly configured in order to take advantage of the Dual Screen Mode capability.
 
-In the main menu Window pulldown there are \textit{Tile left} and \textit{Tile right} options for the 2 monitors.  If you have only 1 monitor, you will see no change upon activating these options.  Tiling is possible due to the existence of one long horizontal screen display buffer. Tile left takes \CGG{} and moves all of its windows to the $2^{nd}$ monitor/TV and Tile right puts it back to the $1^{st}$ monitor.  The left and right monitors are the left part or right part of a Playback A/B Xwindow host referenced in the Video Config Playback A/B for separate X screens.  Shortcuts for Tile left and Tile rights are the letters \texttt{a} and \texttt{b} on the keyboard once you have set \textit{Remote Control mode}.  Below is a summary of the configuration letters:
+In the main menu \textit{Window} pulldown there are \textit{Tile left} and \textit{Tile right} options for the 2 monitors.  If you have only 1 monitor, you will see no change upon activating these options.  Tiling is possible due to the existence of one long horizontal screen display buffer. Tile left takes \CGG{} and moves all of its windows to the $2^{nd}$ monitor/TV and Tile right puts it back to the $1^{st}$ monitor.  The left and right monitors are the left part or right part of a Playback A/B Xwindow host referenced in the Video Config Playback A/B for separate X screens.  Shortcuts for Tile left and Tile rights are the letters \texttt{a} and \texttt{b} on the keyboard once you have set \textit{Remote Control mode}.  Below is a summary of the configuration letters:
 
 \begin{description}
     \item[a] select \textit{playback a} and tile windows left (all on monitor or laptop)
@@ -681,7 +681,7 @@ Now you can \textit{Load} the file that you played and recorded via the \textit{
 \label{sub:use_case_easycap_model_dc60}
 
 A very specific case using an Easy CAPture USB 2.0 Video Adapter with Audio, Model \#DC60 (supports
-NTSC and PAL) is shown here next. The setup for this device is seen in figure~\ref{fig:recording-usb}.
+NTSC and PAL) is shown here next. The setup for this device is seen in figure~\ref{fig:recording-05}.
 A somewhat unusual choice to make note of in this image is the setting for the Video In, Record Driver
 of Video4Linux2 JPEG. 
 
@@ -689,7 +689,7 @@ of Video4Linux2 JPEG.
     \centering
     \includegraphics[width=0.9\linewidth]{recording05.png}
     \caption{Recording setup for EasyCap device}
-    \label{fig:recording-usb}
+    \label{fig:recording-05}
 \end{figure}
 
 Output on startup window while playing:
@@ -749,6 +749,6 @@ In the case of the Hauppauge 9500 WinTV-HVR Hybrid TV stick, the setup is simila
     \centering
     \includegraphics[width=0.6\linewidth]{recording06.png}
     \caption{Two possible capture devices using USB}
-    \label{fig:recording-usb}
+    \label{fig:recording-06}
 \end{figure}