\begin{figure}[htpb]
\centering
\includegraphics[width=0.99\linewidth]{channels02.png}
- \caption{Scanning in progress ($6\%$)}
+ \caption{Scanning in progress ($31\%$)}
\label{fig:channels02}
\end{figure}
\item Or press \textit{X-cancel} to terminate and dismiss the \textit{Recording} application.
\end{itemize}
-Figure~\ref{fig:recording04} shows the recording of a currently running broadcast TV program weather report.
+Figure~\ref{fig:recording04} shows the recording of a currently running broadcast TV program news report.
\begin{figure}[htpb]
\centering
\includegraphics[width=0.95\linewidth]{recording04.png}
- \caption{Recording in real-time a tv weather report}
+ \caption{Recording in real-time a TV news report}
\label{fig:recording04}
\end{figure}
The main menu pulldown, \texttt{Settings $\rightarrow$ Preferences $\rightarrow$ Playback A} and \texttt{B} Tabs, must be properly configured in order to take advantage of the Dual Screen Mode capability.
-In the main menu \textit{Window} pulldown there are \textit{Tile left} and \textit{Tile right} options for the 2 monitors. If you have only 1 monitor, you will see no change upon activating these options. Tiling is possible due to the existence of one long horizontal screen display buffer. Tile left takes \CGG{} and moves all of its windows to the $2^{nd}$ monitor/TV and Tile right puts it back to the $1^{st}$ monitor. The left and right monitors are the left part or right part of a Playback A/B Xwindow host referenced in the Video Config Playback A/B for separate X screens. Shortcuts for Tile left and Tile rights are the letters \texttt{a} and \texttt{b} on the keyboard once you have set \textit{Remote Control mode}. Below is a summary of the configuration letters:
+In the main menu \textit{Window} pulldown there are \textit{Tile left} and \textit{Tile right} options for the 2 monitors. If you have only 1 monitor, you will see no change upon activating these options. Tiling is possible due to the existence of one long horizontal screen display buffer. Tile left takes \CGG{} and moves all of its windows to the $2^{nd}$ monitor/TV and Tile right puts it back to the $1^{st}$ monitor. The left and right monitors are the left part or right part of a Playback A/B Xwindow host referenced in the Video Config Playback A/B for separate X screens. Shortcuts for Tile left and Tile rights are the letters \texttt{a} and \texttt{b} on the keyboard once you have set \textit{Remote Control mode}. Below is a summary of the configuration letters (only when in Remote Control mode):
\begin{description}
\item[a] select \textit{playback a} and tile windows left (all on monitor or laptop)
\item[c] select \textit{playback c} and tile windows left, but composer right (TV mode) This option has the effect of taking the Compositor window and moving it to the $2^{nd}$ monitor/TV without the surrounding borders interfering with the video.
\end{description}
-Since Dual Screen Mode is most widely used for either a demonstration or watching TV, you will want to take advantage of Remote Control mode as described in a following section. In the camera shots below, note the square red box that shows up in the upper left hand corner of the Viewer window (arrow pointing to it but it looks more orange than red) which denotes that the Application/Menu key was used to get into Remote Control mode.
+Since Dual Screen Mode is most widely used for either a demonstration or watching TV, you will want to take advantage of Remote Control mode as described in a following section. In the camera shots below, note the square red box that shows up in the upper left hand corner above the Viewer window, when visible, which denotes that the Application/Menu key was used to get into Remote Control mode.
-Figure~\ref{fig:two-monitors01} shows 2 monitors (could just as well be a big-screen TV for the second monitor) with Tile left where all of the \CGG{} windows are on the left most monitor. The big red arrow points to the little red square box indicating that Remote Control mode is in effect.
+Figure~\ref{fig:two-monitors01} shows 2 monitors (could just as well be a big screen TV for the second monitor) with Tile left where all of the \CGG{} windows are on the left most monitor. Note the little red square box in the far upper left corner indicating that Remote Control mode is in effect.
\begin{figure}[htpb]
\centering
\includegraphics[width=0.85\linewidth]{two-monitors01.png}
- \caption{Dual screen - initial}
+ \caption{Dual screen - initial view on the left monitor and showing part of the right monitor with 2 terminal windows}
\label{fig:two-monitors01}
\end{figure}
-Figure~\ref{fig:two-monitors02} shows 2 monitors with Tile right (b key) where all of the \CGG{} windows are on the right monitor. The left monitor shows the Suse distro logo and a couple of xterm type windows.
+Figure~\ref{fig:two-monitors02} shows 2 monitors with Tile right (b key) where all of the \CGG{} windows are on the right monitor. The partial view of the left monitor shows 2 xterm windows with landscape wallpaper background.
\begin{figure}[htpb]
\centering
\begin{figure}[htpb]
\centering
\includegraphics[width=0.85\linewidth]{two-monitors03.png}
- \caption{Dual screen - \CGG{} compositor on own screen windowed}
+ \caption{Dual screen - \CGG{} compositor on second monitor}
\label{fig:two-monitors03}
\end{figure}
-Figure~\ref{fig:two-monitors04} shows 2 monitors with Compositor window on the 2nd monitor in Fullscreen mode so that no \CGG{} borders are visible to distract from the picture. The big red arrow points to the little red square box indicating that Remote Control mode is in effect.
+Figure~\ref{fig:two-monitors04} shows 2 monitors with Compositor window on the 2nd monitor in Fullscreen mode so that no \CGG{} borders are visible to distract from the picture.
\begin{figure}[htpb]
\centering
\includegraphics[width=0.85\linewidth]{two-monitors04.png}
- \caption{Dual screen - \CGG{} compositor on own screen full screen}
+ \caption{Dual screen - \CGG{} compositor on second monitor in full screen mode}
\label{fig:two-monitors04}
\end{figure}
\label{sub:remote_control_dvb}
\index{capture!remote control for DVB}
-\CGG{} DVB recording/playback can now easily be done in \textit{couch potato} mode using a remote control. This comes in handy when you want to playback on a big TV screen for multiple person viewing. You can use the Application/Menu key on the keyboard to toggle between standard \CGG{} usage or a Dispatcher methodology through use of a remote control, an Android programmed device such as a tablet, or keyboard. The Application/Menu key on most keyboards is between the Alt and Ctrl keys on the right hand side bottom and depicts a menu on it either with or without a pointer (see image below). An ati-x10 Remote Control device (figure~\ref{fig:remote01}) is currently working with \CGG{} and other remote controls may work but have never been tried. The red/orange box on the top left main screen of \CGG{} indicates Dispatcher Method access is activated which allows for keyboard grab which routes all key strokes until toggled off. Below are the currently defined operations.
+\CGG{} DVB recording/playback can now easily be done in \textit{couch potato} mode using a remote control. This comes in handy when you want to playback on a big TV screen for multiple person viewing. You can use the Application/Menu key on the keyboard to toggle between standard \CGG{} usage or a Dispatcher methodology through use of a remote control, an Android programmed device such as a tablet, or keyboard. The Application/Menu key on most keyboards is between the Alt and Ctrl keys on the right hand side bottom and depicts a menu on it either with or without a pointer (see image below). THe Menu key is keycode 135. An ati-x10 Remote Control device (figure~\ref{fig:remote01}) is currently working with \CGG{} and other remote controls may work but have never been tried. The red box on the top left main screen of \CGG{} indicates Dispatcher Method access is activated which allows for keyboard grab which routes all key strokes until toggled off. Below are the currently defined operations.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.1\linewidth]{remote01.png}
+ \includegraphics[width=0.9\linewidth]{remote01.png}
\caption{Ati-x10 Remote}
\label{fig:remote01}
\end{figure}
\subsection{Android Remote Control for DVB}%
\label{sub:android_remote_control_dvb}
-\CGGI{} has Android remote interface code (figure~\ref{fig:remote02}). Any device, such as a tablet or a phone, can be used as long as it is running the Android operating system. Programming an Android Remote Control for DVB is a bit complicated at first, but becomes pretty simple after a bit.
+\CGGI{} has Android remote interface code (figure~\ref{fig:remote02}). Any device, such as a tablet or a smart phone, can be used as long as it is running the Android operating system. Programming an Android Remote Control for DVB is a bit complicated at first, but becomes pretty simple after a bit.
+
+\begin{figure}[htpb]
+ \centering
+ \includegraphics[width=0.9\linewidth]{remote02.png}
+ \caption{Interface tab shows Android Remote Control}
+ \label{fig:remote02}
+\end{figure}
\begin{enumerate}
\item The Android Remote Control requires you to download and install the Android \textit{CineRmt} app package (apk). To install it simply download it (any way you can) to your phone or tablet and click it to install, if it doesn't run automatically.
\item After you install the new phone/tablet app in step 1, start it up from your apps menu.
\end{enumerate}
-\begin{figure}[htpb]
- \centering
- \includegraphics[width=0.9\linewidth]{remote02.png}
- \caption{Interface tab shows Android Remote Control}
- \label{fig:remote02}
-\end{figure}
-
-Before you can use it, the Android device must have the ip address of your computer entered into the configuration menu. The PC you are running \CGG{} on and the Android device have to be on the same network. You can tell it is in communication by tapping the \texttt{Power} (menu) button. When the remote is operated with the \textit{Power} (menu) button, there is a little orange box on the upper left corner of the display to indicate the remote state is active. If you do not see the little orange box when the menu key is tapped, the communication is broken and must be fixed before proceeding. Follow the directions in the paragraph below.
+Before you can use it, the Android device must have the ip address of your computer entered into the configuration menu. The PC you are running \CGG{} on and the Android device have to be on the same network. You can tell it is in communication by tapping the \texttt{Power} (menu) button. When the remote is operated with the \textit{Power} (menu) button, there is a little red box on the upper left corner of the display to indicate the remote state is active. If you do not see the little red box when the menu key is tapped, the communication is broken and must be fixed before proceeding. Follow the directions in the paragraph below.
BIG NOTICE: the firewalls in your computer and wifi router can stop this thing dead. Re-configuring a firewall is tricky and varies from distro to distro. If possible, during setup it is suggested that you disable the firewall temporarily. For those with advanced skills, use tcpdump or wireshark to look for udp messages from the IP address of the device.
SECTION NOT COMPLETE – (manualandroid)
-Figure~\ref{fig:remote03} shows an Android Tablet that can be used as a Remote Control for \CGG{} Recording and Playback.
+Figure~\ref{fig:remote03} shows an Android Smartphone that can be used as a Remote Control for \CGG{} Recording and Playback.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.5\linewidth]{remote03.png}
- \caption{A Tablet with Android Remote Control}
+ \includegraphics[width=0.7\linewidth]{remote03.png}
+ \caption{A Smart Phone with Android Remote Control}
\label{fig:remote03}
\end{figure}
projects / goodguy / cin-manual-latex.git / blobdiff