3 # Name of plugin followed by: and then description.
4 # Additional lines start with 2 tabs.
5 # Lines should be less than 70 characters long.
6 #1234567890123456789012345678901234567890123456789012345678901234567
7 # For usage/readability, a period (.) creates space.
8 1080 to 480: Extracts 2 1920x540 fields from 1920x1080
9 image, resizes them separately, and
10 combines them to 1920x480 interlaced image.
11 1080 to 540: Extracts 2 1920x540 fields from 1920x1080,
12 image, resizes them separately, and
13 combines them to 1920x540 interlaced image.
14 AgingTV: Use to achieve an "old" movie or TV show
15 effect by adding moving lines and snow.
16 Alpha: Vary the alpha value from 0-completely transparent
17 to 1-no transparency at all.
18 Auto Scale: Automatically scale to a specified size.
19 Blue Banana: Used for color transformation or remapping as
20 well as chroma-key filtering. See Manual for usage:
21 . Select a specifc target color.
22 . Create a selection region by expanding color.
23 . Optionally reduce or expand the alpha plane.
24 . Optionally apply a color remapping to selection.
25 . Optionally reset the output alpha to opaque.
26 1) choose your color/click Pick/ check Mark Selected
27 2) modify selection in the Color Selection area
28 3) uncheck Mark Selected, and check Filter Active
29 4) adjust your color choice as desired
30 Blur: Blurs a video track in horizontal and/or
31 vertical in chosen color channels.
32 BoxBlur: Blurs the input video. This fairly fast blur is
33 based on ffmpeg's, and blurs in horizontal and/or
35 Brightness/Contrast: Use to change the brightness or
36 contrast, but could reduce quality.
37 BurningTV: Makes your video "burn" where there are
38 small light colored patches of video.
39 C41: Converts C-41 negative film to the positive image.
40 Chroma key: Erases pixels which match chosen color;
41 they are replaced to black if there is no alpha
42 channel and transparency if there is alpha.
43 Chroma key (HSV): Replaces a color with another color or
44 transparency using HSV variables.
45 Color 3 Way: Modify color of Shadows, Midtones, and Highlights
47 Color Balance: Modify RGB colors or white balance to compensate
48 for errors in video such as low lighting.
49 ColorSpace: Tweak colors from one color space/range to another
50 space=BT601/BT709/BT2020 range=MPEG/JPEG
51 CriKey: Regionally based chroma key with interpolation;
52 useful when you only want a specific zone defined.
54 Color button is used to specify the key by color.
55 Threshold slider is used to set tolerance (0-1).
56 Key mode choices let you pick the method by which
57 the chroma key will be defined.
58 . Search - point at a zone or spot to define
59 area then uses the specified tolerance to pick an
60 edge. A fill will be performed in that area.
61 . Point - the point is the Mask, not the color.
62 . (This method has drag capabilities).
63 . Search all - works same as standard Chroma key.
64 Draw mode options let you use
65 . Alpha - matching pixels replaced with see-thru.
66 . Edge to just outline the edges of the region.
67 . Mask - matching color pixels replaced by black.
68 Crop & Position: Allows for cropping and positioning the input video.
69 DeScratch: Use to remove vertical scratches from film. It can
70 also be used, after image rotation, to remove
71 horizontal noise lines on analog VHS captures.
72 Decimate: Drop frames from a track which are most similar
73 in order to reduce frame rate.
74 Deinterlace: Several selections of line replication to eliminate
75 comb artifacts in interlaced video.
76 Deinterlace-CV: Selection of deinterlacing mode for your video to
77 eliminate comb artifacts.
78 Delay Video: Delay the video by some number of seconds.
79 Denoise video: Clear the video of noise; specify R,G,B, or Alpha.
80 Difference key: Creates transparency in areas which are similar
81 between 2 frames; must be applied to 2 tracks.
82 DotTV: Puts various size dots over the picture to simulate
84 Downsample: Reduce the size of an image by throwing out data,
85 reducing sampling rate.
86 Edge: Display only the edges of the video throughout the
88 Fields to frames: Reads frames at 2x the framerate, combining 2
89 input frames into 1 interlaced output frame.
90 FindObj: Locate a specific object in a scene and replace with
91 another object. This uses OpenCV thirdparty package.
92 Flip: Flip a portion of a video track from left to right,
93 up to down or vice versa.
94 FlowObj: Retards image motion as shown with optical flow. Uses
95 the OpenCV thirdparty package.
96 Foreground: Provide a colored foreground of your choice.
97 Frames to fields: Extracts 2 interlaced fields stored in alternating
98 lines & outputs them as full frames.
99 Freeze Frame: Lowest numbered frame in highlighted area will play
100 in the entire region.
101 GaborObj: Creates an interesting fractalius-like image effect.
102 Uses the OpenCV thirdparty package.
103 Gamma: Converts the logarithmic colors to linear colors
104 using gamma and maximum value.
105 Gradient: Overlays a smooth color gradient on top of every
107 HistEq: Remap colors using blended histogram weights.
108 Histogram: Shows the number of occurrences of each color on a
110 Histogram Bezier: Uses a Bezier parametric curve on histogram plot.
111 HolographicTV: Holographic TV effect.
112 Hue saturation: Use to change hue, saturation & value parameters.
113 Interpolate Bayer: Uses Bayer filter algorithm to interpolate (estimate)
114 missing color information.
115 Interpolate Video: Create illusion of higher frame rate video of low
116 framesrates by averaging over time.
117 Inverse Telecine: Effective deinterlacing tool for use on a video
119 Invert Video: Method of reversing the colors of a video track.
120 Lens: Create the effect of looking through a lens.
121 Linear Blur: Blur with parameters of length, angle, # of steps,
122 and which channels. Does Linear, Radial, or Zoom.
123 Live Video: Reads video directly from the capture card input and
124 replaces any video on the track.
125 Loop video: Loop video by specifying the length of the region to
127 Mandelbrot: Render a Mandelbrot fractal using Cuda.
128 Motion: Tracks translation and rotation motion to stabilize
130 Motion 2 Point: Motion stabilization using 2 pass tracking.
131 Motion Blur: Uses X/Y camera automation vectors to apply a
132 linear blur trailing camera direction.
133 Motion51: Compensates for unwanted motion and stabilizes
134 the image using a unique curve/spline algorithm.
135 A reset option for defaults helps as does OpenGL.
137 Samples - number of pixels which software uses
138 Draw vectors - demonstrates the search operation
139 Sample Radius - radius of circle of the sample area
140 Center X/Y - center position of the sample circle
141 Search W/H - determines width/height used in search
142 Horiz/Vert shake limit - translation constraints
143 Shake fade - how fast translation cancellation fades
144 Twist limit - determines rotation constraints
145 Twist fade - how fast rotation cancellation fades
146 Enable Tracking - caches search results for later
147 Tracking file - name of file with calculate results
148 MotionCV: Motion tracking/stabilization from the community
149 version of cinelerra.
150 MotionHV: Motion tracking/stabilization from the original
152 MoveObj: Move and stabilize object using OpenCV 3rd party pkg.
153 N_Body: Simulation that numerically approximates the
154 evolution of a system of bodies in which each body
155 continuously interacts with every other body (Cuda).
156 Oil painting: Makes video tracks appear as a painting.
157 Overlay: Combine tracks via an overlayer that puts images
158 on top of a bottom layer.
159 Perspective: Allows you to change the viewpoint of an object.
160 With left mouse button, you can drag the corner or:
162 Alt/Shift + Button1 Action:
163 . 0/0 Translate endpoint
165 . 1/0 Translate image
166 . 1/1 Translate view; no change to output
168 The red colored lines in the box show the composer
169 boundary. Use the zoom slider which changes only
170 the zoom view to see if it goes off the screen.
171 The slider goes from 1/100 to 100.
172 Polar: Bends and warps your video in weird ways based on
173 conversion from either polar coordinates to
174 rectangular or vice-versa.
175 RGB - 601: Used to reduce/increase contrast in your video via
176 601 compression or RGB expansion.
177 RGBShift: Align 3 separate planes of R, G, B if misaligned in
178 the video or just shift for interest. Adjust via sliders.
179 Radial Blur: Creates a whirlpool based on settings that simulates
181 ReframeRT: Changes number of frames in a sequence of video
182 directly from timeline; has Stretch and Downsample
184 Reroute: Selectively transfer the alpha channel or the
185 RGB/YUV components from source to target track.
186 Reverse video: Reverse media on the timeline in realtime.
187 Rotate: Rotate the video in degree increments around a
188 pivot point or reverse and flip the video.
189 Rumbler: Jiggle space and time at a given rate for dream-like
191 SVG via Inkscape: Allow the manipulation of an SVG image with
192 Inkscape without having to exit the program.
193 Scale: Reduce or expand the image size depending on
195 Scale Ratio: Manipulate your video to maintain the pixel aspect
196 ratio (proportional geometry). Change values on the
197 left and see the results in the compositor window.
198 . In R,Out R - current input & output aspect ratios
199 . In W/H,Out W/H - current width and height
200 . Scale type of None, Scaled, Cropped, Filled,
201 or Horizontal/Vertical
202 Top aspect ratio data is used to compute the
203 bottom part. The bottom part is for repositioning
205 Selective Temporal Averaging: Smooths out non-moving areas of a video
206 clip by averaging the color across frames.
207 Sharpen: Sharpen the video, either the luminance, horizontal,
209 ShiftInterlace: Shift the interlace lines using odd or even.
210 Sketcher: Sketch lines, curves, or points in different colors/
211 alpha and with fill using various pen widths/types.
212 Sphere Cam: Converts a fisheye image into panoramic projection.
213 Swap Frames: Swap frames with 0-1, 2-3, 4-5... or 1-2, 3-4, 5-6...
214 Swap channels: Swap R,G,B,Alpha with another color channel.
215 Threshold: Converts the image to pure luminance and replaces
216 pixels with 1 of 3 colors.
217 Time Average: Use to create trail patterns, or reduce noise in
218 still images. A number of frames is accumulated
219 and then divided by a divisor to the the average.
220 TimeFront: Performs spatio-temporal video warping.
221 Title: Add text/timestamp/background pngs to video along
222 with the ability to drag to a location if Drag on.
223 Flexible attributes in textbox (mouse right click):
224 . color, font, alpha, size, png, bold, italic,
225 . blink, ul, caps, sup(super/sub), fixed, nudge.
226 Special characters are <, >, \, /, # (see manual).
227 Tracer: Trace an outline of an object for a mask like
229 Translate: Allows displacing, cropping and/or scaling video
230 horizontally/vertically.
231 Unsharp: Applies a traditional darkroom technique, unsharp
232 mask, to every video frame.
233 VideoScope: Summarizes intensity and color on a calibrated
235 Wave: Generates waves in video using Amplitude, Phase,
237 Whirl: Creates a whirl/spiral of the video around the center.
238 YUV: Modify the Y, U, V settings.
239 YUV411: Modify the 411 yuv to look like 420 color space.
240 YUVShift: Realign the 3 sets of YUV input video numbers when
241 they are misaligned. Use slider bars to modify.
242 Zoom Blur: Blur the video and use a zoom effect.
244 # Description of FFmpeg Video Plugins
246 F_allrgb: Generate all rgb colors.
247 F_allyuv: Generate all yuv colors.
248 F_addroi: Mark a region of interest in a video frame.
249 F_amplify: Amplify changes between successive video frames.
250 F_atadenoise: Apply an Adaptive Temporal Averaging Denoiser.
251 F_avgblur: Apply average blur filter.
252 F_bbox: Compute bounding box for each frame.
253 F_bench: Benchmarks part of a filtergraph.
254 F_bilateral: Apply bilateral filter, spatial smoothing while
256 F_bitplanenoise: Measure bit plane noise.
257 F_blackdetect: Detect video intervals that are (almost) black.
258 F_blackframe: Detect frames that are (almost) black.
259 F_boxblur: Blurs the input video. Through the settings you are
260 able to change the power and the radius of the
261 boxblur applied to luma, chroma and alpha.
262 F_bwdif: Deinterlaces the input image.
263 F_cas: Apply Contrast Adaptive Sharpen filter to video.
264 F_cellauto: Create pattern generated by an elementart cellular
266 F_chromahold: Turns a certain color range into gray.
267 F_chromakey: Turns a certain color into transparency. Operates on
269 F_chromashift: Shift chroma.
270 F_ciescope: Video CIE scope.
271 F_color: Provide a uniformly colored input.
272 F_colorbalance: Adjusts the color balance.
273 F_colorchannelmixer: Adjusts colors by mixing color channels.
274 F_colorhold: Turns a certain color range into gray when RGB.
275 F_colorkey: Turns a certain color into transparency when RGB.
276 F_colorlevels: Adjusts the color levels.
277 F_colormatrix: Converts color matrix.
278 F_colorspace: Converts color space/range.
279 F_cover_rect: Find and cover a user specified object.
280 F_crop: Crops the input video.
281 F_cropdetect: Auto-detect crop size.
282 F_curves: Adjust components curves.
283 F_datascope: Video data analysis.
284 F_dblur: Apply Directional blur filter.
285 F_dctdnoiz: Denoise frames using 2D DCT.
286 F_deband: Debands video.
287 F_deblock: Deblock video.
288 F_dedot: Reduce cross-luminance and cross-color.
289 F_deflate: Applies deflate effect.
290 F_deflicker: Remove temporal frame luminance variations.
291 F_dejudder: Removes judder produced by pullup.
292 F_delogo: Removes logo from input video. When using this
293 plugin a green box will appear on the screen, once
294 the logo is inside the box the plugin will hide it.
295 Through the settings you can specify the position
296 of the logo to hide (on a X-Y axis) and the size of
297 the box (you can adjust it to the size of the logo).
298 F_deshake: Stabilizes shaky video.
299 F_despill: Remove unwanted foreground colors, caused by
300 reflected color of green or blue screen.
301 F_dilation: Applies dilation effect.
302 F_doubleweave: Weave input video fields into double number of
304 F_drawbox: Draws a colored box on the input video.
305 Through the settings you are able to choose the
306 position of the box on X and Y coordinates, the size
307 of the box, the color and the thickness of the lines.
308 F_drawgraph: Draw a graph using input video metadata.
309 F_drawgrid: Draws a colored grid on the input video.
310 Through the settings you can select the horizontal
311 and the vertical offset, set the width and height
312 of the grid cell, and the color and thickness of
314 F_edgedetect: Detects and draws edge.
315 F_elbg: Apply posterize effect, using the ELBG algorithm.
316 F_entropy: Measure video frames entropy.
317 F_eq: Adjusts brightness, contrast, gamma and saturation.
318 F_erosion: Applies erosion effect.
319 F_fade: Fade in/out input video.
320 F_fftdnoiz: Denoise frames using 3D FFT.
321 F_fftfilt: Apply arbitrary expressions to pixels in frequency
323 F_field: Extract a field from the input video.
324 F_fieldorder: Set the field order.
325 F_fillborders: Fill borders of the input video.
326 F_floodfill: Fill area of the same color with another color.
327 F_format: Convert the input video to one of the specified pixel
329 F_framerate: Upsamples or downsamples progressive
330 source between specified frame rates.
331 F_framestep: Select one frame every N frames.
332 F_fspp: Applies Fast Simple Post-processing filter.
333 F_gblur: Apply Gaussian Blur filter.
334 F_gradfun: Debands video quickly using gradients.
335 F_gradients: Draws a transparent gradient.
336 F_graphmonitor: Show various filtergraph stats.
337 F_greyedge: Estimates scene illumination by grey edge
339 F_haldclutsrc: Provide an identity Hald CLUT.
340 F_hflip: Horizontally flips the input video.
341 F_histeq: Applies global color histogram equalization.
342 F_histogram: Computes and draws a histogram.
343 F_hqdn3d: Applies a High Quality 3D Denoiser.
344 F_hqx: Scales the input by 2, 3 or 4 using the hq*x
345 magnification algorithm.
346 F_hue: Adjust the hue and saturation of the input video.
347 F_idet: Interlace detect Filter.
348 F_il: Deinterleaves or interleaves fields.
349 F_inflate: Applies inflate effect.
350 F_interlace: Convert progressive video into interlaced.
351 F_kerndeint: Applies kernel deinterlacing to the input.
352 F_lagfun: Slowly update darker pixels.
353 F_lenscorrection: Rectifies the image by correcting for lens distortion.
354 F_life: Generate a life pattern.
355 F_limiter: Limit pixels components to the specified range.
356 F_loop: Loops video frames.
357 F_lumakey: Turns a certain luma into transparency.
358 F_lut: Compute and apply a lookup
359 table to the RGB/YUV input video.
360 F_lut1d: Adjust colors using a 1D LUT.
361 F_lut3d: Apply a 3D LUT (look up table) to an input video.
362 F_lutrgb: Compute and apply a lookup table to RGB input.
363 F_lutyuv: Compute and apply a lookup table to YUV input.
364 F_mandelbrot: Render a Mandelbrot fractal.
365 F_maskfun: Create Mask.
366 F_mcdeint: Applies motion compensating deinterlacing.
367 F_median: Pick median pixel from rectangle defined by radius.
368 F_mestimate: Generate motion vectors.
369 F_metadata: Manipulate video frame metadata.
370 F_minterpolate: Frame rate conversion using Motion Interpolation.
371 F_mpdecimate: Remove near-duplicate frames.
372 F_mptestsrc: Generate various test pattern.
373 F_negate: Negates input video.
374 F_nlmeans: Non-local means denoiser. An example usage is
375 for the recovery of VHS tapes which look bad.
376 F_noise: Adds noise to the video. Through the settings you
377 can select the variables of the noise; for example,
378 strength, flag, or seed.
379 F_normalize: Normalize RGB video.
380 F_oscilloscope: 2D video oscilloscope. Useful to measure spatial
381 impulse, step responses, and chroma delays.
382 F_owdenoise: Denoises using wavelets.
383 F_pad: Add paddings to the input image, and place the
384 original input at the provided x, y coordinates.
385 F_pal100bars: Generate PAL 100% color bars. This only works with
387 F_pal75bars: Generate PAL 75% color bars. This only works with
389 F_perms: Set permissions for the output video frame.
390 F_perspective: Corrects the perspective of video.
391 F_phase: Phase shift fields.
392 F_photosensitivity: Filter out photosensitive epilepsy seizure-inducing
394 F_pixscope: Pixel data analysis for checking color and levels.
395 It will display sample values of color channels.
396 F_pp: Filters video using libpostproc.
397 F_pp7: Applies Postprocessing 7 filter.
398 F_prewitt: Apply prewitt operator.
399 F_pseudocolor: Make pseudocolored video frames.
400 F_pullup: Pullup from field sequence to frames.
401 F_readeia608: Read EIA-608 Closed Caption codes from
402 input video and write them to frame metadata.
403 F_readvitc: Reads vertical interval timecode and writes it to
405 F_realtime: Slows down filtering to match realtime.
406 F_removegrain: Removes grain.
407 F_repeatfields: Hard repeat fields based on MPEG repeat field flag.
408 F_rgbashift: Shift RGBA.
409 F_rgbtestsrc: Generate RGB test pattern.
410 F_roberts: Apply roberts cross operator which performs a
411 simple, quick 2-D spatial gradient measurement
412 on the video (usually a grayscale image). It
413 highlights regions of high spatial frequency
414 which most likely correspond to edges.
415 F_rotate: Rotates the input image.
416 F_sab: Applies shape adaptive blur.
417 F_scale: Scale the input video size and/or convert the image
419 F_scale_cuda: GPU accelerated video resizer.
420 F_scdet: Detect video scene change.
421 F_scroll: Scroll input video horizontally and/or vertically
423 F_selectivecolor: Apply cmyk adjustments to specific color ranges.
424 F_separatefields: Split input video frames into fields.
425 F_setparams: Force field, or color property for the output video
427 F_setrange: Force color range for the output video frame.
428 F_showinfo: Show textual information for each video frame.
429 F_showpalette: Display frame palette.
430 F_shuffleframes: Shuffles video frames.
431 F_shuffleplanes: Shuffles video planes.
432 F_sierpinski: Generate a Sierpinski carpet/triangle fractal, and
434 F_signalstats: Separates statistics from video analysis.
435 F_smartblur: Blurs the input video without impacting the outlines.
436 Through the settings you can select the radius, the
437 strength and the threshold of luma and chroma.
438 F_smptebars: Generate SMPTE color bars.
439 F_smptehdbars: Generate SMPTE HD color bars.
440 F_sobel: Applies sobel operator.
441 F_spp: Applies a simple post processing filter.
442 F_stereo3d: Converts video stereoscopic 3D view.
443 F_super2xsai: Scales the input by 2x using the Super2xSal pixel art
445 F_swaprect: Swaps 2 rectangular objects in video.
446 F_swapuv: Swaps U and V components.
447 F_tpad: Temporarily pad video frames.
448 F_tblend: Blend successive frames.
449 F_testsrc: Generate test pattern.
450 F_testsrc2: Generate another test pattern.
451 F_thistogram: Compute and draw a color distribution histogram for
452 the input video across time.
453 F_tile: Tile several successive frames together.
454 F_tinterlace: Performs temporal field interlacing.
455 F_tlut2: Compute and apply a lookup table from two
457 F_tmedian: Pick median pixels from successive frames.
458 F_tmix: Mix successive video frames.
459 F_tonemap: Conversion to/from different dynamic ranges.
460 F_transpose: Transposes input video.
461 F_transpose_vaapi: VAAPI VPP for transpose.
462 F_unsharp: Sharpen or blur the input video.
463 F_untile: Untile a frame into a sequence of frames.
464 F_uspp: Applies Ultra Simple/Slow Post-processing filter.
465 F_v360: Convert 360 videos between various formats.
466 F_vaguedenoiser: Applies a Wavelet based Denoiser.
467 F_vectorscope: Video vectorscope.
468 F_vflip: Flips the input video vertically.
469 F_vfrdet: Variable frame rate detect filter.
470 F_vibrance: Boost or alter saturation.
471 F_vignette: Makes or reverses a vignette effect.
472 Through the settings you can set the circle center
473 position on a X-Y axis,choose the angle, the aspect
474 and set the dithering of the vignette.
475 F_w3fdif: Applies Martin Weston three field deinterlace.
476 F_waveform: Video waveform monitor.
477 F_weave: Weaves input video fields into frames.
478 F_xbr: Scales the input using xBR algorithm.
479 F_yadif: Deinterlaces the input image.
480 F_yadif_cuda: Deinterlace CUDA frames.
481 F_yaepblur: Yet another edge preserving blur filter.
482 F_yuvtestsrc: Generate YUV test pattern.
483 F_zoompan: Applies Zoom & Pan effect.
485 # Description of FFmpeg Audio Plugins
487 F_abench: Benchmark part of a filtergraph.
488 F_acompressor: Audio compressor.
489 F_acontrast: Simple audio dynamic range compression/expansion
491 F_acrusher: Reduces audio bit resolution.
492 F_acue: Delay filtering to match a cue.
493 F_adelay: Delays one or more audio channels.
494 F_aderivative: Compute derivative of input audio.
495 F_aecho: Adds echoing to the audio.
496 F_aemphasis: Audio emphasis.
497 F_aeval: Filters audio signal according to specific expression.
498 F_afade: Fades in/out input audio.
499 F_aformat: Convert the input audio to the specified format.
501 F_aiir: Apply infinite Impulse Response filter with supplied
503 F_aintegral: Compute integral of input audio.
504 F_allpass: Applies a two-pole all-pass filter.
505 F_aloop: Loops audio samples.
506 F_ametadata: Manipulate audio frame metadata.
507 F_anlmdn: Reduce broadband noise from stream using
509 F_anoisesrc: Generates a noise audio signal.
510 F_aperms: Set permissions for the output audio frame.
511 F_aphaser: Adds a phasing effect to the audio.
512 F_arealtime: Slows down filtering to match realtime.
513 F_aresample: Resamples audio data.
514 F_asetrate: Change the sample rate without altering the data.
515 F_asoftclip: Apply audio soft clipping - a type of distortion effect
516 where signal amplitude is saturated along a smooth
518 F_astats: Shows time domain statistics about audio frames.
519 F_asubboost: Boost subwoofer frequencies.
520 F_atempo: Adjusts audio tempo.
521 F_atrim: Pick one continuous section from the input and drop
523 F_bandpass: Applies a two-pole Butterworth band-pass filter.
524 F_bandreject: Applies a two-pole Butterworth band-reject filter.
525 F_bass: Boosts or cuts lower frequencies.
526 F_biquad: Applies a biquad IIR filter with the given coefficents.
527 F_chorus: Adds a chorus effect to the audio.
528 F_compand: Compresses or expands audio dynamic range.
529 F_compensationdelay: Audio compensation delay line.
530 F_crossfeed: Apply headphone crossfeed which blends the left &
531 right channels of a stereo audio recording. It is
532 mainly used to reduce extreme stereo separation of
533 low frequencies to produce speaker like sound.
534 F_crystalizer: Simple Expand Audio Dynamic Range filter.
535 F_dcshift: Applies a DC shift to the audio.
536 F_deesser: Apply de-essing to the audio.
537 F_drmeter: Measure audio dynamic range where setting window
538 length in seconds is used to split audio into
539 segments of equal length.
540 F_dyaudnorm: Dynamic Audio Normalizer. When using this plugin,
541 be sure to “attach effect” to all audio tracks by dragging
542 the plugin to the 1st audio track and then right mouse
543 clicking all subsequent audio tracks which brings up a menu.
544 Highlight the effect shown in the middle section and click OK.
545 F_earwax: Widens the stereo image. When using this plugin,
546 be sure to “attach effect” to all audio tracks by
547 dragging the plugin to the 1st audio track and then
548 right mouse clicking all subsequent audio tracks
549 which brings up a menu. Then highlight the effect
550 shown in the middle section and click OK.
551 F_equalizer: Applies two-pole peaking equalization (EQ) filter.
552 F_extrastereo: Increases difference between stereo audio channels.
553 When using this plugin, be sure to “attach effect” to
554 all audio tracks by dragging the plugin to the 1st
555 audio track and then right mouse clicking all of the
556 next audio tracks which brings up a menu. Highlight
557 the effect shown in the middle section and click OK.
558 F_flanger: Applies a flanging effect to the audio.
559 F_haas: Apply Haas Stereo Enhancer for a more natural
560 sounding pan effect or more clarity in the center of
561 the mix. With this filter applied to mono signals it
562 gives some directionality and stretches its stereo
564 F_highpass: Applies a high-pass filter with 3dB point frequency.
565 F_hilbert: Generate Hilbert transform FIR coefficients.
566 F_loudnorm: EBU R128 loudness normalization.
567 F_lowpass: Applies a low-pass filter with 3dB point frequency.
568 F_mcompand: Multiband compress or expand audiodynamic range.
569 The input audio is divided into bands which is like
570 the crossover of a loudspeaker, resulting in flat
571 frequency response when absent compander action.
572 F_pan: Remix channels with coefficients (panning).
573 F_silenceremove: Removes silence.
574 F_sine: Generate sine wave audio signal.
575 F_stereotools: Applies various stereo tools. When using this plugin,
576 be sure to “attach effect” to all audio tracks by
577 dragging the plugin to the 1st audio track and then
578 right mouse clicking all subsequent audio tracks
579 bringing up a menu. Highlight the effect shown
580 in the middle section and click OK.
581 F_stereowiden: Applies stereo widening effect. When using this
582 plugin, be sure to “attach effect” to all audio
583 tracks by dragging the plugin to the 1st audio track
584 and then right mouse clicking all subsequent audio
585 tracks bringing up a menu. Highlight the effect
586 shown in the middle section and click OK.
587 F_treble: Boosts or cuts upper frequencies.
588 F_tremolo: Applies tremolo effect.
589 F_vibrato: Applies vibrato effect.
590 F_volume: Change input volume.
591 F_volumedetect: Detect audio volume.
595 L_AM pitchshifter: Runs a single write pointer and two read pointers
596 over a ringbuffer. The output is faded between the
597 two readpointers according to the sine of the
598 distance from the write pointer. The design is based
599 on the mechanism of a mechanical pitchshifter.
600 L_Aliasing: Effect that causes different signals to become
601 aliases of one another when sampled.
602 #Allpass delay line, cubic spline interpolation:
603 #Allpass delay line, linear interpolation:
604 #Allpass delay line, noninterpolating:
605 L_Analogue Oscillator: Simulates the output you get from an analogue
606 synth's oscillators. You can get a reasonable
607 emulation of a 303's square.
609 L_Artificial latency: Used to correct for latency between channels.
610 L_Audio Divider (Suboctave Generator): Reduces the period of the signal by the factor
611 given, and makes it a square wave in the process.
612 Has some amplitude tracking capability.
613 AudioScope: Convert input audio to video output representing the
614 audio power spectrum. Shows you the sound wave.
616 L_Barry's Satan Maximiser: Compresses signals with a very short attack and
617 decay, infinite ratio and hard knee. Gives good
618 harsh (non-musical) distortion.
619 L_Bode frequency shifter: A popular analogue synth module, it works by
620 shifting all the frequencies of an input signal up or
621 down by a specified frequency
622 L_Bode frequency shifter (CV): Controls the frequency shift applied to
623 the input signal, in KHz.
624 L_Chebyshev distortion: Interesting distortion effect that is seeded
625 from incoming signal envelope.
626 Chorus: Adds a chorus effect to the audio.
627 L_Comb Filter: Controls the distance between the filters peaks.
628 L_Comb Splitter: Divides the input up into two parts with frequency
629 peaks at f Hz intervals, skewed by f/2 Hz between
631 #Comb delay line, cubic spline interpolation:
632 #Comb delay line, linear interpolation:
633 #Comb delay line, noninterpolating:
634 L_Constant Signal Generator: Add an output DC offset at the given amplitude
635 to the input signal. It has no real use other than for
636 debugging and in modular synths.
637 L_Crossfade: Controls the degree to which the inputs are mixed
638 into the output. Value of -1 means that the output is
639 just the A input, and a value of 1.0 means it is just
641 L_Crossfade (4 outs): Controls the degree to which the inputs are mixed
642 into the output. Value of -1 means the output is just
643 the A input, and a value of 1.0 means it is just the B.
644 L_Crossover distortion: Simulation of the distortion that happens in class
645 B and AB power amps when the signal crosses 0.
646 Compressor: Lessen the dynamic range between the loudest and
647 quietest parts of an audio signal by boosting the
648 quieter signals and attenuating the louder signals.
649 DC Offset: Remove DC Offset, which is usually an undesirable
650 characteristic of a recording normally caused by
651 defective equipment. (Has no controls)
652 L_DC Offset Remover: Remove DC Offset, which is usually an undesirable
653 characteristic of a recording normally caused by
655 L_DJ EQ: 3-band Equalization - Hi-Mid-Lo.
658 L_Decimator: Reduces the effective sample rate, and reduces the
659 bit depth of the input signal.
660 L_Declipper: Removes clicks from input signals.
661 Delay audio: Delay the audio by a specified time offset.
663 Denoise: Reduce audio background noise.
664 DenoiseFFT: Noise removal from audio using FFT editing.
665 Despike: Detect and eliminate out of range impulse values.
666 L_Diode Processor: Mangles the signal as if it had been passed through
667 a diode rectifier network.
668 L_Dyson compressor: Compress peaks to reduce dynamic range and
669 create room to increase audio levels
670 EQ Graphic: Graphic equalizer which sets the output levels for
671 specified frequency bands.
672 EQ Parametric: Parametric equalizer to show and output levels for
673 frequency, quality, level, mode, and wetness.
674 Echo: Add echo - reflection of sound - for effect.
675 . Level represents the volume adjustment
676 . Atten is the reflected output level
677 . Offset is the lag in the attenuated echo signal
678 EchoCancel: Removes echoes from audio to improve the quality.
679 Detects and removes time delayed reflections.
680 L_Exponential signal decay: Time for the echoes to decay by 60 DCBs.
682 L_Fast Lookahead limiter: A limiter with an attack time of 5ms. It adds
683 just over 5ms of lantecy to the input signal, but
684 guarantees no signals over the limit, and tries to
685 get the minimum amount of distortion.
686 L_Fast overdrive: Compresses the extreme peaks to make a sound
687 similar to an overdriven amplifier.
688 Flanger: Adds a flanger effect to the audio.
689 L_Flanger: Digital flanger implementation. Uses excursion,
690 controlled bandwidth modulation function, which
691 makes the modulation less repetitive and noticable.
692 L_Foldover distortion: Uses a sine wave approximation to simulate
693 valve style foldover distortion.
694 L_Fractionally Addressed Delay Line: Fixed ring buffer delay implementation.
695 Has different dynamics than a normal delay
696 Freeverb: Adds effect of multiple decaying echoes to audio
697 signals based on a specific algorithm. Common use
698 of reverb is simulate music played in a closed room.
699 L_Frequency tracker: Controls the level of damping applied to the output.
700 High values make the frequency output jump
701 around, low values make it a bit slow to respond.
702 L_GLAME Butterworth Highpass: Cuts off frequencies below a certain point.
703 L_GLAME Butterworth Lowpass: Cuts off frequencies above a certain point.
704 L_GSM simulator: Encodes and decodes signal using the GSM voice
705 compression system. Has the effect of making it
706 sound like being sent over a European mobile phone
708 L_GVerb: A mono In, stereo Out reverb implementation.
709 Gain: Add gain, input level, to increase/decrease loudness.
711 L_Giant flange: A normal flanger with excessively long delay times.
712 L_Glame Bandpass Analog Filter: IIR bandpass filter modeled after an
714 L_Glame Bandpass Filter: Allows you to tweak the number of stages used
715 for filtering. Every stage adds two more poles,
716 which leads to a steeper dropoff.
717 #L_Glame Butterworth X-over Filter:
718 L_Glame Highpass Filter: IIR highpass filter allows you to tweak the number
719 of stages used for filtering. Every stage adds 2
720 more poles, which leads to steeper dropoff.
721 #L_Glame Lowpass Filter:
722 L_Gong beater: Simulates the action of a beator on a gong surface,
723 used to trigger the gong physical model.
724 L_Gong model: Physical model of a metal gong.
725 L_Hard Limiter: Brick hard limiter with residue mixer.
726 L_Harmonic generator: Allows you to add harmonics and remove the
727 fundamental from any audio signal.
728 L_Hermes Filter: Simulation of a modern analogue synth - a Pro Tone,
729 L_Higher Quality Pitch Scaler: Pitch shifter implementation that scales the
730 harmonics appropriately with the base frequencies.
731 L_Hilbert transformer: Phase shifts the input signal by 90 degrees. It
732 outputs the 90 degree phase shifted signal and the
733 unshifted signal, both delayed by an equal amount.
734 L_Impulse convolver: Convolver for a set of short impulses which have to
736 Interpolate: Generate a smooth curve based on sound (currently,
737 does not appear to work). Has no controls.
738 Invert Audio: Reverses the numerical sign of the digital audio.
740 L_Inverter: Utility plugin that inverts the signal.
741 L_Karaoke: Attempts to strip the vocals from a stereo signal.
742 L_L/C/R Delay: A left/center/right delay with feedback
744 L_LS Filter: Filter similiar to the filter used in giga sampler.
745 Live Audio: Reads audio directly from the soundcard input,
746 replacing any audio on track.
747 Loop audio: Loop some number of samples of audio over & over.
748 #Overlay: Overlay Top or Bottom track in Add/Multiply mode.
749 L_Mag's Notch Filter: Allows you to tweak the number of stages used for
750 filtering. Every stage adds two more poles, which
751 leads to a steeper dropoff.
752 L_Matrix Spatialiser: Simple spatializer to control the width of a
754 #L_Matrix; MS to Stereo:
755 #L_Matrix; Stereo to MS:
756 L_Modulatable delay: A delay whose tape is modulated at audio rate.
757 L_Mono to Stereo splitter: Takes mono input signal, and outputs it to
758 both left and right channel.
759 L_Multiband EQ: Multiband graphical equalizer implemented using
761 L_Multivoice Chorus: Implementation of a Multivoice chorus algorithm,
762 using a sync based noise interpolation method to
763 produce a modulation law making it possible to
764 have many voices without the metallic, artificial
766 #L_Nonbandlimited single-sample impulses (Frequency; Control):
767 L_Pitch Scaler: Pitch shifter implementation that scales the
768 harmonics appropriately with the base frequencies.
769 Pitch shift: Uses FFT to try to change the pitch without
770 changing the duration.
771 L_Plate reverb: Physical model of a steel plate reverb. It uses 8
772 linear waveguides to model the plate.
773 L_Pointer cast distortion: Distortion is created by treating the floating
774 point repesentation of the input signal as a 0.32 1's
775 complement fixed point integer. Not musical but still
776 recognizable. Makes interesting noises.
777 L_Rate shifter: Stretches or compresses the input with a ringbuffer.
778 Remove Gaps: Remove silent gap (below DB threshold) which
779 persist for more than the time limit.
780 ResampleRT: Allows you to convert an audio file from one
781 sample rate to another.
782 L_Retro Flanger: Model of someone flanging the input. Models the
783 tape saturation effects and frequency smear of a
784 manual flanger. Results are distorted, but more
785 subtle flanger sound than from a digital flanger.
786 Reverb: Reflections of sound to add depth and fullness.
787 Simulates creation of a large number of reflections
788 (lots of walls) which build up and then decay.
789 L_Reverse Delay (5s max): A reverse delay.
790 Reverse audio: Play the audio backwards.
791 L_Ringmod with LFO: Simple ring modulator and LFO.
792 L_Ringmod with two inputs: Simple 2 input ring modulator.
793 L_SC1: High quality RMS compressor for musical work.
794 L_SC2: Compressor with sidechain.
795 L_SC3: Stereo compressor with sidechain input.
796 L_SC4: Stereo compressor with variable envelope follower
797 for RMS / peak behavior.
798 L_SC4 mono: Mono compressor with variable envelope follower
799 for RMS / peak behavior.
800 L_SE4: Stereo expander with variable envelope follower for
802 L_Signal sifter: Sorts and mixes blocks of the input signal to give a
803 bumpy ramp effect. Can produce interesting noises.
804 L_Simple amplifier: Controls the gain of the input signal in dB's.
805 #L_Simple delay line, cubic spline interpolation:
806 #L_Simple delay line, linear interpolation:
807 #L_Simple delay line, noninterpolating:
808 L_Sine + cosine oscillator: Simple oscillator that outputs sinewaves
809 with a 90 degree phase shift between them.
810 L_Single band parametric: A single band of a parametric filter.
811 L_Sinus wavewrapper: Produces unusual distortion, for amp like tone.
813 SoundLevel: Displays the Max/RMS sound level in decibels.
814 Spectrogram: Visual representation of the sound levels at
815 specified frequencies as they vary with time.
816 L_State Variable Filter: Oversampled state variable filter with tweaks.
817 L_Step Demuxer: Inputs up to 8 signals & switches between them on
818 output when the signal on the clock input goes high.
819 L_Surround matrix encoder: Allows you to encode 4 channels of sound into
820 a stereo compatible stream that will be decoded by
821 a Dolby1 Surround/Pro-Logic decoder into Left, Right,
822 Center and Surround signals.
823 Synthesizer: Generate synthesizer sounds; to set key data, turn
824 on Generate keyframes while tweeking.
825 L_Tape Delay Simulation: Models the tape motion and some smear effect.
826 Time Stretch RT: Change the speed of an audio signal without
828 Tremolo: Applies a tremolo effect to the audio.
829 #L_Transient mangler:
830 #L_Triple band parametric with shelves:
832 L_Valve saturation: Model of valve (tube) distortion, lacking some of
833 the harmonics you would get in a real tube amp.
834 L_Vocoder: A category of voice codec that analyzes and
835 synthesizes the human voice signal for audio data
836 compression, multiplexing, voice encryption, voice
838 L_VyNil (Vinyl Effect): Sounds like it is being played from a record.
839 L_Wave Terrain Oscillator: x and y move the cursor around on a 2D
840 landscape wavetable used to generate the output.
841 L_Wave shaper: Reshapes the wave by an exponential function,
842 L_z-1: Implements the z-1 function - a single sample delay.
844 # LV2 Calf Audio Plugins
846 L2_Calf Analyzer: Has a frequency domain display and a goniometer.
847 L2_Calf Bass Enhancer: Harmonics for fattening the lower end.
848 L2_Calf Compensation Delay Line: A metric based delay to compensate for
849 differing positions of microphones or speakers.
850 L2_Calf Compressor: Smooth sounding dynamic compressor with varied
852 L2_Calf Crusher: Lets you crush the signal by reducing bit resolution.
853 L2_Calf Deesser: An optimized filter stage in the sidechain gives you
854 good control over dynamic highs.
855 L2_Calf Emphasis: Adds/subtracts different frequency response curves
856 to create standard compliant material for different media.
857 L2_Calf Envelope Filter: A filter following the envelope of a signal.
858 L2_Calf Equalizer 12 Band: Filter Equalizer providing specialized
859 tools for everyday signal processing.
860 L2_Calf Equalizer 30 Band: Uses different filters for manipulations
862 L2_Calf Equalizer 5 Band: Filter Equalizer providing specialized
863 tools for everyday signal processing.
864 L2_Calf Equalizer 8 Band: Filter Equalizer providing specialized
865 tools for everyday signal processing.
866 L2_Calf Exciter: Filtered distortion to add brilliance to your tracks.
867 L2_Calf Filter: Selectable 12dB/24dB/36dB rolloff, lowpass or highpass
868 with inertia/smoothing for cutoff for more analog sound.
869 L2_Calf Filterclavier: Controllable via MIDI and follows Note-On
870 signals with its frequency settings.
871 L2_Calf Flanger: Simple stereo flanger with linear interpolation.
872 L2_Calf Fluidsynth: Implementation of a Fluidsynth SF2 sample player.
873 L2_Calf Gate: Solid based noise gate.
874 L2_Calf Haas Stereo Enhancer: Widens your stereo material via a simple
876 L2_Calf Limiter: Uses lookahead technology to smooth the gain reduction
877 process while preventing signals from rising above a threshold.
878 L2_Calf Mono Compressor: Single banded compressor.
879 L2_Calf Mono Input: Useful functions to deal with split processes like
880 phase inversion and balance.
881 L2_Calf Monosynth: Simple monophonic synthesizer useful for synth
883 L2_Calf Multi Chorus: Multi-tape stereo chorus with adjustable number
885 L2_Calf Multiband Compressor: Based on Thor's compressions routine; 4
886 channels with separate compression stages increases loudness.
887 L2_Calf Multiband Gate: Flexible 4 channels with separate gate stages.
888 L2_Calf Multiband Limiter: Brings presence, punch, and loudness to
890 L2_Calf Organ: An organ synthesizer which produces different sounds.
891 L2_Calf Phaser: Basic stereo phaser with all typical settings.
892 L2_Calf Pulsator: In between an autopanner and a tremolo; also produces
893 funny stereo effects.
894 L2_Calf Reverb: Simple reverb with basic controls and neutral sound.
895 L2_Calf Reverse Delay: Reverses the input signal while feeding the
896 delay buffer resulting in a reversed sound effect.
897 L2_Calf Ring Modulator: Extends the typical ring modulation by 2 LFO.
898 L2_Calf Rotary Speaker: Morphs between slow/fast mode when switched
899 using MIDI, control ports, or automation.
900 L2_Calf Saturator: Universal distortion tool; can act as guitar
901 distortion or harmonics generator.
902 L2_Calf Sidechain Compressor: Based on Thor's compression routine; a
903 universal tool for any problem concerning sound dynamics.
904 L2_Calf Sidechain Gate: Precise gating, especially in drum recordings.
905 L2_Calf Sidechain Limiter: Acts like the multiband limiter but provides
906 an additional stereo channel to feed material.
907 L2_Calf Stereo Tools: Toolbox for handling stereo signals; can change
908 M/S microphone signals to L/R and vice versa.
909 L2_Calf Tape Simulator: Modifies signals as if they were recorded on
910 a tape machine. Simulates aspects of magnetical recordings.
911 L2_Calf Transient Designer: Used to modify the envelope of percussive
912 signals like drum sounds or percussion instruments.
913 L2_Calf Vintage Delay: Simple simulation of tape echo with a filter
914 in a feedback loop and BPM-based time setting.
915 L2_Calf Vocoder: Modulates the frequency response of a carrier signal
916 by measuring response of a modulator signal in realtime.
917 L2_Calf Wavetable: Synthesizer based on predefined wavetables with ADSR
919 L2_Calf X-Over 2 Band: Flexible way to split a signal in different
920 frequency bands for feeding dedicated speaker setups.
921 L2_Calf X-Over 3 Band: Flexible way to split a signal in different
922 frequency bands for feeding dedicated speaker setups.
923 L2_Calf X-Over 4 Band: Flexible way to split a signal in different
924 frequency bands for feeding dedicated speaker setups.
926 #L2_Example MIDI Gate
927 #L2_Example Metrobome
930 # Transitions - Audio and Video
932 Crossfade: Creates a smooth transition from one audio source
933 edit to another. The crossfade has the first
934 source fade out while the second fades in.
935 BandSlide: Bands slide across video to see the image slide.
936 BandWipe: Bands wipe across the video to see the mask slides.
937 Dissolve: A soft dissolve transition between two video
938 segments. The left segment turns more transparent
939 while at the same time the right segment
940 materializes into place.
941 Flash: Video flashes when transitioning between segments.
942 IrisSquare: Video switches segments via a small rectangular
943 view that gradually grows to full size.
944 Shape Wipe: Wipe a specific shape across the video. Available
945 shapes are: Butterfly, burst, circle-s, clock, cloud-s,
946 cross-s, diagonal-s, diamond-s, door-s, gravity,
947 heart, linear-s, Plasma, specks, spiral, tile-s, and
949 Slide: Image slides into view - can set: Left/Right/In/Out.
950 Wipe: Wipe the image across screen starting left or right.
951 Zoom: Zoom out video at X/Y magnification for X seconds.
projects / goodguy / cinelerra.git / blob