Frames per seconds is usually $29.97$ for NTSC and $25$ fps for PAL. The standard SD dvd generally uses the MPEG-2 program stream with a filename extension of \texttt{m2v}. BD blu-ray media is not normally interlaced, but you can leave it interlaced. Blu-ray uses the MPEG transport stream which contains 1 or more program streams with a default filename extension of \texttt{m2ts}.
Requirements for creating DVDs is the hardware device to write the media on and, obviously, the blank media for either BD or SD. When generating SD media, you will have to install \textit{dvdauthor} and for BD media, install \textit{udftools} if they are not on your system. Also, keep in mind that to mount filesystems for creating files and to burn DVDs, you will have to be root since you have to have privileges, unless special permissions have been provided for a non-root user. It is also highly recommended to
-run the cinelerra startup from a terminal window, instead of the icon, in order to see informative messages of how to actually write the output (at prompt: keyin \texttt{<install\_directory\_path/bin/cin}).
+run the Cinelerra startup from a terminal window, instead of the icon, in order to see informative messages of how to actually write the output (at prompt: keyin \texttt{<install\_directory\_path/bin/cin}).
A warning here -- writing blu-ray BDs and regular SDs can take a large amount of clock time. Keep in mind that a blu-ray can contain 25 hours of viewing, so would take multiple hours to just write one.
Any problems encountered will require that you read more information in this section to include specific details, helpful hints, and problem resolution.
-\paragraph{Details and specific explanations} to create blu-ray or regular DVD are provided here. It is very advantageous to startup cinelerra from the command line prompt instead of the icon. Also, please be root or your hard work will be lost when the automount is issued and fails for bluray udfs mounting.
+\paragraph{Details and specific explanations} to create blu-ray or regular DVD are provided here. It is very advantageous to startup Cinelerra from the command line prompt instead of the icon. Also, please be root or your hard work will be lost when the automount is issued and fails for bluray udfs mounting.
The general design of the DVD/blu-ray generation operations is to first render media using batch rendering and then terminate Cinelerra to start a script which creates the target device filesystem data. These scripts are the \texttt{dvd.sh} and \texttt{bd.sh} scripts written into the target directory. For DVD, the general plan is to write a directory \texttt{<target>/iso} with the dvd filesystem via \textit{dvdauthor} and then generate an iso9660 filesystem and write it to a dvd via \textit{growisofs}.
NOTE of IMPORTANCE: there is a serious situation with the interaction between the Operating System (OS) and bdwrite when creating blu-ray, that requires automount to be turned off. The blu-ray automatic script unmounts the blu-ray/UDF filesystem but the system has not finalized the directories so the OS creates a new loop file device and the data is loaded and cached for use by the new loop but it is stale. Consequences is that not all of the data is written where it should be. The solution is for the OS not to mount this second mount so we have to make sure it doesn't. There are 2 methods to fix this. The first and easiest is by using the following command to disable automount:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
gsettings set org.gnome.desktop.media-handling automount false
\end{lstlisting}
This can be reversed when you have completed the blu-ray generation via:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
gsettings set org.gnome.desktop.media-handling automount true
\end{lstlisting}
\item Click \texttt{OK} check button.
\end{itemize}
-The default bitrate is the largest value possible. The actual \textit{target} bitrate is calculated based on a formula from the blu-ray/DVD code. It divides the media size (in bits) by the video time (in seconds) to find the bitrate that will \textit{just fit} on the target media. This could create a weird bitrate if the media is large, and the video time is small, so the default/target bitrate is limited to $10Mb/s$.Batch jobs are then built and appended to the job list. Once these batch jobs are built, if you make any changes, you have to start over. You will see listed the batch jobs that are created to perform the rendering/tasks -- 2 jobs for blu-ray, one for audio/video processing and one for the scripts. There will be 3 batch jobs created for DVD when not using ffmpeg to include one each for audio and video and then one more for the scripts. When you click on \texttt{start}, it fires off those jobs and you will see the rendering main window progress bar in the bottom corner reflecting the fact that it is currently processing. Be aware that the Cinelerra program will be totally shutdown AFTER the batch jobs finish.Screenshot below shows BD blu-ray creation with 2 batch jobs queued up and ready to go.
+The default bitrate is the largest value possible. The actual \textit{target} bitrate is calculated based on a formula from the blu-ray/DVD code. It divides the media size (in bits) by the video time (in seconds) to find the bitrate that will \textit{just fit} on the target media. This could create a weird bitrate if the media is large, and the video time is small, so the default/target bitrate is limited to $10Mb/s$.Batch jobs are then built and appended to the job list. Once these batch jobs are built, if you make any changes, you have to start over. You will see listed the batch jobs that are created to perform the rendering/tasks -- 2 jobs for blu-ray, one for audio/video processing and one for the scripts. There will be 3 batch jobs created for DVD when not using ffmpeg to include one each for audio and video and then one more for the scripts. When you click on \texttt{start}, it fires off those jobs and you will see the rendering main window progress bar in the bottom corner reflecting the fact that it is currently processing. Be aware that the Cinelerra program will be totally shutdown AFTER the batch jobs finish. Screenshot below shows BD blu-ray creation with 2 batch jobs queued up and ready to go.
Figure~\ref{fig:dvd-batch01} for DVD and Figure~\ref{fig:dvd-batch02} for BD shows a creation render ready to be started. Note that because it is not ffmpeg, the processing of video is done separately from audio. If you need to modify the video tracks, which you can see is ghosted out, you need to highlight the first batch job listed. Be sure to highlight the first batch job before pressing Start so it runs all of the jobs and be sure the X for job enabled is set.
\label{fig:dvd-batch01}
\end{figure}
-\vspace{-4ex}
+% \vspace{-4ex}
\begin{figure}[htpb]
\centering
\includegraphics[width=0.8\linewidth]{images/dvd-batch02.png}
If bluray to test the filesystem you just created, use the command line interface; loopback mount the filesystem image which was generated in the target directory. For example if blu-ray:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
cd /TargetDirectory/bd_20150820-093747/
mount -o loop,ro ./bd.udfs ./udfs
#check the media using a compatible media rendering tool like ffplay
Note: unwritten (virgin) media must be formatted first using:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
dvd+rw-format /dev/bd #only done once and does not take very long
\end{lstlisting}
To write or rewrite rewritable blu-ray media:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
cd /TargetDirectory/bd_20150820-093747/
dd if=./bd.udfs of=/dev/bd bs=2048000 #the growisofs command below also works
\end{lstlisting}
To write blu-ray write-once media: (BD-R) (no pre-formatting needed):
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
cd /TargetDirectory/bd_20150820-093747/
growisofs -dvd-compat -Z /dev/bd=./bd.udfs
\end{lstlisting}
Note: unwritten (virgin) media must be formatted first using:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
dvd+rw-format /dev/dvd #only done once and does not take very long
\end{lstlisting}
To write a DVD, load blank media and run the following from the command line (requires dvdauthor):
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
cd /TargetDirector/dvd_20160404-175416
growisofs -dvd-compat -Z /dev/dvd -dvd-video ./iso
\end{lstlisting}
\label{fig:dvd-batch03}
\end{figure}
-Figure~\ref{fig:dvd-batch04} shows the availability of 10-bit high quality 4:2 :2 for a Batch Render seen by clicking on wrench icon. You need specially compiled cinelerra in order to use the x265 10-bit as opposed to 8-bit.
+Figure~\ref{fig:dvd-batch04} shows the availability of 10-bit high quality 4:2 :2 for a Batch Render seen by clicking on wrench icon. You need specially compiled Cinelerra in order to use the x265 10-bit as opposed to 8-bit.
\begin{figure}[htpb]
\centering
\section{Output Terminal Messages from Creating DVDs}%
\label{sec:output_terminal_messages_dvd}
-Below are examples of what the batch jobs generate and you will see on the terminal screen if you started the cinelerra program in the recommended manner from a terminal window. It is just informational but will let you know if errors. In looking at any of the output, you can safely ignore the errors that read \texttt{Unsupported codec with id 100357 for input stream 0} -- this comes from \textit{nav-data} (navigation data). The first 2 examples are seen from running the batch jobs; the last 2 are from the single line execution which records the media output to the DVD hardware.
+Below are examples of what the batch jobs generate and you will see on the terminal screen if you started the Cinelerra program in the recommended manner from a terminal window. It is just informational but will let you know if errors. In looking at any of the output, you can safely ignore the errors that read \texttt{Unsupported codec with id 100357 for input stream 0} -- this comes from \textit{nav-data} (navigation data). The first 2 examples are seen from running the batch jobs; the last 2 are from the single line execution which records the media output to the DVD hardware.
\subsubsection*{SD Example: Partial Output during Cinelerra run}
\label{ssub:sd_example_partial_output}
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
...
FFMPEG::open_decoder: some stream times estimated
Render::render_single: Session finished.
\subsubsection*{BD Example: Partial Output during Cinelerra run}
\label{ssub:bd_example_partial_output}
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
...
FFMPEG::open_decoder: some stream times estimated
Render::render_single: Session finished.
\subsubsection*{SD Example – Partial Output during writing disc media}
\label{ssub:sd_example_partial_output_writing}
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
growisofs -dvd-compat -Z /dev/sr0 -dvd-video /tmp/dvd_20161224-160756/iso
WARNING: /dev/sr0 already carries isofs!
About to execute 'mkisofs -dvd-video /tmp/dvd_20161224-160756/iso | builtin_dd of=/dev/sr0 obs=32k seek=0'
\subsubsection*{BD Example – Partial Output during writing disc media}
\label{ssub:bd_example_partial_output_writing}
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
growisofs -dvd-compat -Z /dev/sr0=/tmp/bd_20161224-155658/bd.udfs
Executing 'builtin_dd if=/tmp/bd_20161224-155658/bd.udfs of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 2.0x4390KBps.
For blu-ray creation, \texttt{cd /workpath/bd\_date-time} directory and look for similar files:
-\texttt{bd.jobs \qquad bd.m2ts \qquad bd.sh \qquad bd.udfs \qquad bd.xml}
+\texttt{bd.jobs \quad bd.m2ts \quad bd.sh \quad bd.udfs \quad bd.xml}
\texttt{udfs} directory which is used as a loopback mount point
For DVD creation, \texttt{cd /workpath/dvd\_date-time} directory and look for similar files:
-\texttt{dvd.ac3 \qquad dvd.jobs \qquad dvd.m2v \qquad dvd.mpg \qquad dvd.sh \qquad dvd.xml}
+\texttt{dvd.ac3 \quad dvd.jobs \quad dvd.m2v \quad dvd.mpg \quad dvd.sh \quad dvd.xml}
\texttt{iso} directory with VIDEO\_TS and AUDIO\_TS subdirectories of non-zero size.
Note that there will be no files in the actual AUDIO\_TS directory.
\item There is also a file in the same directory, called bd.jobs. It was the information that was used in creating the batch jobs and may be helpful in determining what parameters were actually used if there are any resulting problems. With enough background knowledge, you can make changes and rerun.
\item For blu-ray check to make sure you do not have any spurious loopback disks mounted that may interfere with the correct generation. Use the df command to check this and then the umount command to unmount these. Also, check to make sure you have used the gsettings command to disable automount.
\item For blu-ray loopback mount the \texttt{<target>/bd.udfs} image, and see if it has the BDMV filesystem written to it, and in particular a subdirectory named STREAM. Look at the results in \texttt{./udfs} and check for the stream file which should exist in \texttt{./udfs/BDMV/STREAM/00000.m2ts} and should have the same size as \texttt{./bd.m2ts}.
- \begin{lstlisting}[language=bash]
+ \begin{lstlisting}[language=bash,numbers=none]
mount -o loop <target>/bd.udfs <target>/udfs
ls -lR <target>/udfs
du -sc <target>/udfs
\label{ssub:checklist_troubleshooting}
\begin{itemize}
- \item Are you logged in as root? This is required in order to loopback mount files for bluray and to write media on \texttt{/dev/hardware}. See section 8.3.5 \todo{What are you referring to?} for a workaround for normal user mode.
- \item Did you startup cinelerra from a terminal window so you can see informative messages?
+ \item Are you logged in as root? This is required in order to loopback mount files for bluray and to write media on \texttt{/dev/hardware}. See section \hyperref[sec:bluray_workaround_mount_umount]{13.7} for a workaround for normal user mode.
+ \item Did you startup Cinelerra from a terminal window so you can see informative messages?
\item Is udftools installed for BD and dvdauthor installed for SD?
\item Do you have loopback not enabled for bluray? At least temporarily, disable automount via:
- \begin{lstlisting}[language=bash]
+ \begin{lstlisting}[language=bash,numbers=none]
gsettings set org.gnome.desktop.media-handling automount false
\end{lstlisting}
\item Did you have sufficient disk space for working/writing files? In the \textit{Create} window, the \textit{disk space} will be displayed in green if sufficient, but in red if less than what fits on the disc media.
usage:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
./zmpeg3cc2txt [-c cc_service ] [-s start:length, ...] [ -t track ] [-v verbose ] [-w wdw mask ] [-x file.xml ] [-o file.udvd ] file.ts
\end{lstlisting}
To use this program, the input file must be a transport stream (broadcast video) which contains closed captioning services. The service id defaults to one, and the default video track is zero. Either \texttt{-o} or \texttt{-x} must be specified to indicate the output file format desired. If the output file name is a '-' then stdout is selected as the output file.
For example:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
zmpeg3cc2txt -o - /dvb_data/channel5.ts
\end{lstlisting}
An MTS file is a video file saved in the high-definition (HD) MPEG Transport Stream video format, commonly called \textit{AVCHD}. It contains HD video compatible with Blu-ray disc format and is based on the MPEG-2 transport stream. MTS files are often used by Sony, Panasonic, Canon and other HD camcorders. Legal input for Video --- MPEG1VIDEO, MPEG2VIDEO, H264; Audio --- MP1, MP2, AC3, AC3PLUS, DTS, TRUHD.
-For creating a blu-ray disc, if you have HDV MPEG-2 media that is in blu-ray format, you can save the original quality of your work, rather than rendering it to another format. Follow the steps below directly instead of going through cinelerra. It has been tested on 10 different MTS files.
+For creating a blu-ray disc, if you have HDV MPEG-2 media that is in blu-ray format, you can save the original quality of your work, rather than rendering it to another format. Follow the steps below directly instead of going through Cinelerra. It has been tested on 10 different MTS files.
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
du -sb /yourHDVfile.MTS # Determine the size of your file in bytes.
blocks=((size-in-bytes/2048 + 4096)) # Convert bytes into blocks + a little more.
mkudffs /tmp/newfilename.udfs blocks # Create a file with that \# of blocks + some extra.
mount -o loop /tmp/newfilename.udfs /mntX # Use a mount point like mntX that is not in use.
-/<cinelerra_installed_path>/bin/bdwrite /mntX /tmp/yourHDVfile.MTS # Substitute cinelerra path.
+/<cinelerra_installed_path>/bin/bdwrite /mntX /tmp/yourHDVfile.MTS # Substitute Cinelerra path.
umount /mntX # You must unmount the udfs filesystem
growisofs -Z /dev/bd=/tmp/newfilename.udfs # Replace /dev/bd with your bluray hardware device.
OR dd if=/tmp/newfilename.udfs of=/dev/bd bs=2048000 # if using rewritable blu-ray; replace bd.
\section{Blu-ray Workaround for Mount/Umount}%
\label{sec:bluray_workaround_mount_umount}
-Creating BD images to be written to media requires usage of \textit{mount} and \textit{umount} which typically can only be done by the root user due to security. If you want to avoid running cinelerra as root, you can implement a workaround by adding a line in \texttt{/etc/fstab} (must be root to edit the file initially) and by creating a directory in your home area, called \texttt{bluray}. You only have to do this once unless you upgrade the Operating System and it wipes out the line in \texttt{/etc/fsta}b. Now the cinelerra program will automatically do the mount and umount for you each time you execute BD Render and you can run as an ordinary user.
+Creating BD images to be written to media requires usage of \textit{mount} and \textit{umount} which typically can only be done by the root user due to security. If you want to avoid running Cinelerra as root, you can implement a workaround by adding a line in \texttt{/etc/fstab} (must be root to edit the file initially) and by creating a directory in your home area, called \texttt{bluray}. You only have to do this once unless you upgrade the Operating System and it wipes out the line in \texttt{/etc/fsta}b. Now the Cinelerra program will automatically do the mount and umount for you each time you execute BD Render and you can run as an ordinary user.
The line to add to \texttt{/etc/fstab} will look something like the following, assuming your username is \textit{name} and your groupid may be \textit{users} or \textit{name}. If you do an \texttt{ls -l} in your home directory, the $3^{rd}$ and $4^{th}$ fields shown will be your uid or name and gid or groupid which you must substitute in the line below.
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
/home/name/image /home/name/bluray udf noauto,loop,rw,user,uid=name,gid=groupid 0 0
\end{lstlisting}
-Also, be sure to do a \texttt{mkdir bluray} in your \texttt{/home/name} directory as this is a requirement (owned by you; uid=gid=name). When the actual image to be written to disc media is created, it will first d any current \texttt{/home/name/image} file. Warning – make sure you do not already have a file called \textit{image} that you want to save as it will be automatically deleted every time you initiate a BD Render. So you will want to burn a bluray disc after cinelerra creates the \textit{image} since it will written over on the next rendition. The actual writing to your bluray burner (something like \texttt{/dev/sr0}) is done outside of cinelerra at a terminal prompt and requires root privilege usually. You can either use \textit{sudo} for 1 line or create user wheel group to get around this.
+Also, be sure to do a \texttt{mkdir bluray} in your \texttt{/home/name} directory as this is a requirement (owned by you; uid=gid=name). When the actual image to be written to disc media is created, it will first d any current \texttt{/home/name/image} file. Warning – make sure you do not already have a file called \textit{image} that you want to save as it will be automatically deleted every time you initiate a BD Render. So you will want to burn a bluray disc after Cinelerra creates the \textit{image} since it will written over on the next rendition. The actual writing to your bluray burner (something like \texttt{/dev/sr0}) is done outside of Cinelerra at a terminal prompt and requires root privilege usually. You can either use \textit{sudo} for 1 line or create user wheel group to get around this.
\section{Blu-ray from Multiple Cinelerra Output}%
\label{sec:bluray_multiple_cinelerra_output}
-Writing prepared multiple cinelerra output files, \texttt{bd.m2ts}, to a single bluray disc is relatively easy to do but is not done automatically. You can render all of the desired files via the Create BD menu, save each individual \texttt{bd.m2ts} file with a unique name, construct a Menu Title that reflects the contents of each of these files, then manually use a few commands to create a udfs file to be written to BD.
+Writing prepared multiple Cinelerra output files, \texttt{bd.m2ts}, to a single bluray disc is relatively easy to do but is not done automatically. You can render all of the desired files via the Create BD menu, save each individual \texttt{bd.m2ts} file with a unique name, construct a Menu Title that reflects the contents of each of these files, then manually use a few commands to create a udfs file to be written to BD.
Usage of the final preparation taken from the bdwrite program comments:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
./bdwrite <tgt_dir_path> <playlist-0> <sep> <playlistp1> <sep> ... <sep> <playlist-n>
<sep> == -<pgm_pid> | --<pgm_pid> | ---<pgm_pid>
For example:
-\begin{lstlisting}[language=bash]
+\begin{lstlisting}[language=bash,numbers=none]
./bdwrite /tmp/dir /path/menu_titles.m2ts --- /path/clip0.m2ts -- /path/clip1.m2ts -- /path/clip2.m2ts
\end{lstlisting}
\begin{enumerate}
\item Create all of the \texttt{bd.m2ts} files that you want to put on the Bluray.
- \item Using cinelerra, design your Title page using a few seconds of video and the \textit{Title} plugin.
+ \item Using Cinelerra, design your Title page using a few seconds of video and the \textit{Title} plugin.
\item Use BD Create to render your short Title video.
\item Next is the most complicated part which is to run \texttt{mkudffs} with a sufficient amount of disk space to hold all of the \texttt{bd.m2ts} files \textit{plus a little more!} To calculate this, you can record the sizes from having run BD Create mkudffs. This number is displayed on the terminal screen when using the command line interface each time and add them together. Or recalculate the size of each bd.m2ts using the formula below and adding them all together. This is the number of blocks used to make a bluray image space for bdwrite to use. For many files, this could require a huge amount of space, so check first.
- \begin{lstlisting}[language=bash]
- Total size = File0 size in bytes / 2048 + 4094 “+” File1 size in bytes / 2048 + 4094 “+” ...
+ \begin{lstlisting}[language=bash,numbers=none]
+ Total size = File0 size in bytes / 2048 + 4094 "+" File1 size in bytes / 2048 + 4094 "+" ...
\end{lstlisting}
Now create the image file via: \texttt{mkudffs image <Total size>} where image or udfs is the image name.
- \item Loop mount the disk image (refer to Sections 8.3.4 and 8.3.5 \todo{idem as above}).
- \item Then actually write your multiple bd.m2ts type files onto the \textit{image} where \texttt{<cin\_path>} is the location of the
cinelerra binary \textit{bdwrite} file and \texttt{<path>} is your directory path. Below is a single line that wrapped around with 4 Titles.
- \begin{lstlisting}[language=bash]
+ \item Loop mount the disk image (refer to Section \hyperref[sec:bluray_workaround_mount_umount]{13.7}).
+ \item Then actually write your multiple bd.m2ts type files onto the \textit{image} where \texttt{<cin\_path>} is the location of the
Cinelerra binary \textit{bdwrite} file and \texttt{<path>} is your directory path. Below is a single line that wrapped around with 4 Titles.
+ \begin{lstlisting}[language=bash,numbers=none]
<cin_path>/bin/bdwrite image /<path>menu_titles.m2ts --- /<path>/bd1.m2ts -- /<path>/bd2.m2ts -- /<path>/bd3.m2ts -- /<path>bd4.m2ts
\end{lstlisting}
Note that the 3 dashes after the \texttt{menu\_titles.m2ts} lets the bluray player know to \textit{pause} after playing the few seconds video which contains the index to the rest of the files. The 2 dashes after each of the bd.m2ts signify \textit{stop}. That is when you will have to use your remote to \textit{Search Titles} in order to play the next one you want to see. In addition, if for some reason you just want to \textit{play all}, you will have to add another line to the Title menu as a choice and list all of the 4 files in a row at the end of your bdwrite line without any dashes in between.
\centering
\includegraphics[width=0.7\linewidth]{images/scaleratio.png}
\caption{Scale Ratio plugin}
- \label{fig:scaleratio}
+ \label{fig:scaleratio1}
\end{figure}
Left and right sides of the bottom portion show the Source and the Destination X, Y, W, H values. As you change the values on the left side, you can see how this will affect the output as you observe the results in the compositor window. For example, as you change the values for SrcY in a \textit{cropped} Scale scenario, you see up/down movement.
\begin{enumerate}[start=13]
\item Next, make sure you have the Timeline set in the Main window at the beginning of where you want to start rendering. Also, make sure the first line in the \textit{Batches to render} section is highlighted as you can see above by the blue highlighting. Click on the \texttt{Start} box in the Batch Render window and you will see the video playing in the Compositor window.
\item Cinelerra program will be stopped when done rendering; you will be at the terminal prompt where you will see it has printed out some informational messages (or errors if problems), the last 2 are:
- \begin{lstlisting}[language=bash]
+ \begin{lstlisting}[language=bash,numbers=none]
To burn dvd, load blank media and run:
growisofs -dvd-compat -Z /dev/dvd -dvd-video /mnt0/dvd_20161027-131723/iso
\end{lstlisting}
projects / goodguy / cin-manual-latex.git / blobdiff