--- /dev/null
+/*
+DeScratch - Scratches Removing Filter
+Plugin for Avisynth 2.5
+Copyright (c)2003-2016 Alexander G. Balakhnin aka Fizick
+bag@hotmail.ru http://avisynth.org.ru
+
+This program is FREE software under GPL licence v2.
+
+This plugin removes vertical scratches from digitized films.
+Reworked for cin5 by GG. 03/2018, from the laws of Fizick's
+*/
+
+
+#include "clip.h"
+#include "filexml.h"
+#include "language.h"
+#include "descratch.h"
+
+REGISTER_PLUGIN(DeScratchMain)
+
+DeScratchMain::DeScratchMain(PluginServer *server)
+ : PluginVClient(server)
+{
+ inf = 0; sz_inf = 0;
+ src = 0; dst = 0;
+ tmp_frame = 0;
+ blurry = 0;
+ overlay_frame = 0;
+}
+
+DeScratchMain::~DeScratchMain()
+{
+ delete [] inf;
+ delete src;
+ delete dst;
+ delete blurry;
+ delete tmp_frame;
+ delete overlay_frame;
+}
+
+const char* DeScratchMain::plugin_title() { return N_("DeScratch"); }
+int DeScratchMain::is_realtime() { return 1; }
+
+void DeScratchConfig::reset()
+{
+ threshold = 24;
+ asymmetry = 16;
+ min_width = 1;
+ max_width = 3;
+ min_len = 1;
+ max_len = 100;
+ max_angle = 45;
+ blur_len = 4;
+ gap_len = 10;
+ mode_y = MODE_ALL;
+ mode_u = MODE_NONE;
+ mode_v = MODE_NONE;
+ mark = 0;
+ ffade = 100;
+ border = 2;
+}
+
+DeScratchConfig::DeScratchConfig()
+{
+ reset();
+}
+
+DeScratchConfig::~DeScratchConfig()
+{
+}
+
+int DeScratchConfig::equivalent(DeScratchConfig &that)
+{
+ return threshold == that.threshold &&
+ asymmetry == that.asymmetry &&
+ min_width == that.min_width &&
+ max_width == that.max_width &&
+ min_len == that.min_len &&
+ max_len == that.max_len &&
+ max_angle == that.max_angle &&
+ blur_len == that.blur_len &&
+ gap_len == that.gap_len &&
+ mode_y == that.mode_y &&
+ mode_u == that.mode_u &&
+ mode_v == that.mode_v &&
+ mark == that.mark &&
+ ffade == that.ffade &&
+ border == that.border;
+}
+void DeScratchConfig::copy_from(DeScratchConfig &that)
+{
+ threshold = that.threshold;
+ asymmetry = that.asymmetry;
+ min_width = that.min_width;
+ max_width = that.max_width;
+ min_len = that.min_len;
+ max_len = that.max_len;
+ max_angle = that.max_angle;
+ blur_len = that.blur_len;
+ gap_len = that.gap_len;
+ mode_y = that.mode_y;
+ mode_u = that.mode_u;
+ mode_v = that.mode_v;
+ mark = that.mark;
+ ffade = that.ffade;
+ border = that.border;
+}
+
+void DeScratchConfig::interpolate(DeScratchConfig &prev, DeScratchConfig &next,
+ int64_t prev_frame, int64_t next_frame, int64_t current_frame)
+{
+ copy_from(prev);
+}
+
+LOAD_CONFIGURATION_MACRO(DeScratchMain, DeScratchConfig)
+
+void DeScratchMain::save_data(KeyFrame *keyframe)
+{
+ FileXML output;
+// cause data to be stored directly in text
+ output.set_shared_output(keyframe->get_data(), MESSAGESIZE);
+// Store data
+ output.tag.set_title("DESCRATCH");
+ output.tag.set_property("THRESHOLD", config.threshold);
+ output.tag.set_property("ASYMMETRY", config.asymmetry);
+ output.tag.set_property("MIN_WIDTH", config.min_width);
+ output.tag.set_property("MAX_WIDTH", config.max_width);
+ output.tag.set_property("MIN_LEN", config.min_len);
+ output.tag.set_property("MAX_LEN", config.max_len);
+ output.tag.set_property("MAX_ANGLE", config.max_angle);
+ output.tag.set_property("BLUR_LEN", config.blur_len);
+ output.tag.set_property("GAP_LEN", config.gap_len);
+ output.tag.set_property("MODE_Y", config.mode_y);
+ output.tag.set_property("MODE_U", config.mode_u);
+ output.tag.set_property("MODE_V", config.mode_v);
+ output.tag.set_property("MARK", config.mark);
+ output.tag.set_property("FFADE", config.ffade);
+ output.tag.set_property("BORDER", config.border);
+ output.append_tag();
+ output.tag.set_title("/DESCRATCH");
+ output.append_tag();
+ output.append_newline();
+ output.terminate_string();
+}
+
+void DeScratchMain::read_data(KeyFrame *keyframe)
+{
+ FileXML input;
+ input.set_shared_input(keyframe->get_data(), strlen(keyframe->get_data()));
+
+ int result = 0;
+
+ while( !(result = input.read_tag()) ) {
+ if(input.tag.title_is("DESCRATCH")) {
+ config.threshold = input.tag.get_property("THRESHOLD", config.threshold);
+ config.asymmetry = input.tag.get_property("ASYMMETRY", config.asymmetry);
+ config.min_width = input.tag.get_property("MIN_WIDTH", config.min_width);
+ config.max_width = input.tag.get_property("MAX_WIDTH", config.max_width);
+ config.min_len = input.tag.get_property("MIN_LEN", config.min_len);
+ config.max_len = input.tag.get_property("MAX_LEN", config.max_len);
+ config.max_angle = input.tag.get_property("MAX_ANGLE", config.max_angle);
+ config.blur_len = input.tag.get_property("BLUR_LEN", config.blur_len);
+ config.gap_len = input.tag.get_property("GAP_LEN", config.gap_len);
+ config.mode_y = input.tag.get_property("MODE_Y", config.mode_y);
+ config.mode_u = input.tag.get_property("MODE_U", config.mode_u);
+ config.mode_v = input.tag.get_property("MODE_V", config.mode_v);
+ config.mark = input.tag.get_property("MARK", config.mark);
+ config.ffade = input.tag.get_property("FFADE", config.ffade);
+ config.border = input.tag.get_property("BORDER", config.border);
+ }
+ }
+}
+
+void DeScratchMain::get_extrems_plane(int comp, int thresh)
+{
+ uint8_t **rows = blurry->get_rows();
+ int d = config.max_width, d1 = d+1, wd = src_w - d1;
+ int bpp = 3, dsz = d * bpp;
+ int asym = config.asymmetry;
+ if( thresh > 0 ) { // black (low value) scratches
+ for( int y=0; y<src_h; ++y ) {
+ uint8_t *ip = inf + y*src_w;
+ int x = 0;
+ for( ; x<d1; ++x ) *ip++ = SD_NULL;
+ uint8_t *dp = rows[y] + x*bpp + comp;
+ for( ; x<wd; ++x,dp+=bpp ) {
+ uint8_t *lp = dp-dsz, *rp = dp+dsz;
+ *ip++ = (lp[0]-*dp) > thresh && (rp[0]-*dp) > thresh &&
+ (abs(lp[-bpp]-rp[+bpp]) <= asym) &&
+ ((lp[0]-lp[+bpp]) + (rp[0]-rp[-bpp]) >
+ (lp[-bpp]-lp[0]) + (rp[bpp]-rp[0])) ?
+ SD_EXTREM : SD_NULL; // sharp extremum found
+ }
+ for( ; x<src_w; ++x ) *ip++ = SD_NULL;
+ }
+ }
+ else { // white (high value) scratches
+ for( int y=0; y<src_h; ++y ) {
+ uint8_t *ip = inf + y*src_w;
+ int x = 0;
+ for( ; x<d1; ++x ) *ip++ = SD_NULL;
+ uint8_t *dp = rows[y] + x*bpp + comp;
+ for( ; x<wd; ++x,dp+=bpp ) {
+ uint8_t *lp = dp-dsz, *rp = dp+dsz;
+ *ip++ = (lp[0]-*dp) < thresh && (rp[0]-*dp) < thresh &&
+ (abs(lp[-bpp]-rp[+bpp]) <= asym) &&
+ ((lp[0]-lp[+bpp]) + (rp[0]-rp[-bpp]) <
+ (lp[-bpp]-lp[0]) + (rp[bpp]-rp[0])) ?
+ SD_EXTREM : SD_NULL; // sharp extremum found
+ }
+ for( ; x<src_w; ++x ) *ip++ = SD_NULL;
+ }
+ }
+}
+
+//
+void DeScratchMain::remove_min_extrems_plane(int comp, int thresh)
+{
+ uint8_t **rows = blurry->get_rows();
+ int d = config.min_width, d1 = d+1, wd = src_w - d1;
+ int bpp = 3, dsz = d * bpp;
+ int asym = config.asymmetry;
+ if( thresh > 0 ) { // black (low value) scratches
+ for( int y=0; y<src_h; ++y ) {
+ uint8_t *ip = inf + y*src_w;
+ uint8_t *dp = rows[y] + d1*bpp + comp;
+ for( int x=d1; x<wd; ++x,++ip,dp+=bpp ) {
+ if( *ip != SD_EXTREM ) continue;
+ uint8_t *lp = dp-dsz, *rp = dp+dsz;
+ if( (lp[0]-*dp) > thresh && (rp[0]-*dp) > thresh &&
+ (abs(lp[-bpp]-rp[+bpp]) <= asym) &&
+ ((lp[0]-lp[+bpp]) + (rp[0]-rp[-bpp]) >
+ (lp[-bpp]-lp[0]) + (rp[bpp]-rp[0])) )
+ *ip = SD_NULL; // sharp extremum found
+ }
+ }
+ }
+ else { // white (high value) scratches
+ for( int y=0; y<src_h; ++y ) {
+ uint8_t *ip = inf + y*src_w;
+ uint8_t *dp = rows[y] + d1*bpp + comp;
+ for( int x=d1; x<wd; ++x,++ip,dp+=bpp ) {
+ if( *ip != SD_EXTREM ) continue;
+ uint8_t *lp = dp-dsz, *rp = dp+dsz;
+ if( (lp[0]-*dp) < thresh && (rp[0]-*dp) < thresh &&
+ (abs(lp[-bpp]-rp[+bpp]) <= asym) &&
+ ((lp[0]-lp[+bpp]) + (rp[0]-rp[-bpp]) <
+ (lp[-bpp]-lp[0]) + (rp[bpp]-rp[0])) )
+ *ip = SD_NULL; // sharp extremum found
+ }
+ }
+ }
+}
+
+void DeScratchMain::close_gaps()
+{
+ int len = config.gap_len * src_h / 100;
+ for( int y=len; y<src_h; ++y ) {
+ uint8_t *ip = inf + y*src_w;
+ for( int x=0; x<src_w; ++x,++ip ) {
+ if( *ip != SD_EXTREM ) continue;
+ uint8_t *bp = ip; // expand to previous lines in range
+ for( int i=len; --i>0; ) *(bp-=src_w) = SD_EXTREM;
+ }
+ }
+}
+
+void DeScratchMain::test_scratches()
+{
+ int w2 = src_w - 2;
+ int min_len = config.min_len * src_h / 100;
+ int max_len = config.max_len * src_h / 100;
+ int maxwidth = config.max_width*2 + 1;
+ int maxangle = config.max_angle;
+
+ for( int y=0; y<src_h; ++y ) {
+ for( int x=2; x<w2; ++x ) {
+ int ofs = y*src_w + x; // offset of first candidate
+ if( inf[ofs] != SD_EXTREM ) continue;
+ int ctr = ofs+1, nctr = ctr; // centered to inf for maxwidth=3
+ int hy = src_h - y, len;
+ for( len=0; len<hy; ++len ) { // cycle along inf
+ uint8_t *ip = inf + ctr;
+ int n = 0; // number good points in row
+ if( maxwidth >= 3 ) {
+ if( ip[-2] == SD_EXTREM ) { ip[-2] = SD_TESTED; nctr = ctr-2; ++n; }
+ if( ip[+2] == SD_EXTREM ) { ip[+2] = SD_TESTED; nctr = ctr+2; ++n; }
+ }
+ if( ip[-1] == SD_EXTREM ) { ip[-1] = SD_TESTED; nctr = ctr-1; ++n; }
+ if( ip[+1] == SD_EXTREM ) { ip[+1] = SD_TESTED; nctr = ctr+1; ++n; }
+ if( ip[+0] == SD_EXTREM ) { ip[+0] = SD_TESTED; nctr = ctr+0; ++n; }
+ // end of points tests, check result for row:
+ // check gap and angle, if no points or big angle, it is end of inf
+ if( !n || abs(nctr%src_w - x) >= maxwidth+len*maxangle/57 ) break;
+ ctr = nctr + src_w; // new center for next row test
+ }
+ int mask = len >= min_len && len <= max_len ? SD_GOOD : SD_REJECT;
+ ctr = ofs+1; nctr = ctr; // pass2
+ for( len=0; len<hy; ++len ) { // cycle along inf
+ uint8_t *ip = inf + ctr;
+ int n = 0; // number good points in row
+ if( maxwidth >= 3 ) {
+ if( ip[-2] == SD_TESTED ) { ip[-2] = mask; nctr = ctr-2; ++n; }
+ if( ip[+2] == SD_TESTED ) { ip[+2] = mask; nctr = ctr+2; ++n; }
+ }
+ if( ip[-1] == SD_TESTED ) { ip[-1] = mask; nctr = ctr-1; ++n; }
+ if( ip[+1] == SD_TESTED ) { ip[+1] = mask; nctr = ctr+1; ++n; }
+ if( ip[+0] == SD_TESTED ) { ip[+0] = mask; nctr = ctr+0; ++n; }
+ // end of points tests, check result for row:
+ // check gap and angle, if no points or big angle, it is end of inf
+ if( !n || abs(nctr%src_w - x) >= maxwidth+len*maxangle/57 ) break;
+ ctr = nctr + src_w; // new center for next row test
+ }
+ }
+ }
+}
+
+void DeScratchMain::mark_scratches_plane(int comp, int mask, int value)
+{
+ int bpp = 3, dst_w = dst->get_w(), dst_h = dst->get_h();
+ uint8_t **rows = dst->get_rows();
+ for( int y=0; y<dst_h; ++y ) {
+ uint8_t *dp = rows[y] + comp;
+ uint8_t *ip = inf + y*src_w;
+ for( int x=0; x<dst_w; ++x,++ip,dp+=bpp ) {
+ if( *ip == mask ) *dp = value;
+ }
+ }
+}
+
+void DeScratchMain::remove_scratches_plane(int comp)
+{
+ int r = config.max_width;
+ int fade = (config.ffade * 1024) / 100; // norm 2^10
+ int fade1 = 1024 - fade;
+ uint8_t *ip = inf;
+ uint8_t **src_rows = src->get_rows();
+ uint8_t **dst_rows = dst->get_rows();
+ uint8_t **blur_rows = blurry->get_rows();
+ int bpp = 3, margin = r+config.border+2, wm = src_w-margin;
+ float nrm = 1. / 1024.f, nrm2r = nrm / (2*r*bpp);
+
+ for( int y=0; y<src_h; ++y ) {
+ int left = 0;
+ uint8_t *inp = src_rows[y] + comp;
+ uint8_t *out = dst_rows[y] + comp;
+ uint8_t *blur = blur_rows[y] + comp;
+ for( int x=margin; x<wm; ++x ) {
+ uint8_t *dp = ip + x;
+ if( (dp[+0]&SD_GOOD) && !(dp[-1]&SD_GOOD) ) left = x;
+ if( left!=0 && (dp[+0]&SD_GOOD) && !(dp[+1]&SD_GOOD) ) { // the inf, left/right
+ int right = x;
+ int ctr = (left + right) / 2; // the inf center
+ int ls = ctr - r, rs = ctr + r;
+ int lt = ls - config.border - 1, rt = rs + config.border + 1;
+ lt *= bpp; ls *= bpp; rs *= bpp; rt *= bpp; // component index
+ for( int i=ls; i<=rs; i+=bpp ) { // across the inf
+ int lv = inp[i] + blur[lt] - blur[i];
+ int rv = inp[i] + blur[rt] - blur[i];
+ lv = fade*lv + fade1*inp[lt];
+ rv = fade*rv + fade1*inp[rt];
+ int v = nrm2r*(lv*(rs-i) + rv*(i-ls));
+ out[i] = CLIP(v,0,255);
+ }
+ for( int i=lt; i<ls; i+=bpp ) { // at left border
+ int lv = inp[i] + blur[lt] - blur[i];
+ int v = nrm*(fade*lv + fade1*inp[lt]);
+ out[i] = CLIP(v,0,255);
+ }
+ for( int i=rt; i>rs; i-=bpp ) { // at right border
+ int rv = inp[i] + blur[rt] - blur[i];
+ int v = nrm*(fade*rv + fade1*inp[rt]);
+ out[i] = CLIP(v,0,255);
+ }
+ left = 0;
+ }
+ }
+ ip += src_w;
+ }
+}
+
+void DeScratchMain::pass(int comp, int thresh)
+{
+// pass for current plane and current sign
+ get_extrems_plane(comp, thresh);
+ if( config.min_width > 1 )
+ remove_min_extrems_plane(comp, thresh);
+ close_gaps();
+ test_scratches();
+ if( config.mark ) {
+ int value = config.threshold > 0 ? 0 : 255;
+ mark_scratches_plane(comp, SD_GOOD, value);
+ mark_scratches_plane(comp, SD_REJECT, 127);
+ }
+ else
+ remove_scratches_plane(comp);
+}
+
+void DeScratchMain::blur(int scale)
+{
+ int tw = src_w, th = (src_h / scale) & ~1;
+ if( tmp_frame &&
+ (tmp_frame->get_w() != tw || tmp_frame->get_h() != th) ) {
+ delete tmp_frame; tmp_frame = 0;
+ }
+ if( !tmp_frame )
+ tmp_frame = new VFrame(tw, th, BC_YUV888);
+
+ if( blurry &&
+ (blurry->get_w() != src_w || blurry->get_h() != src_h) ) {
+ delete blurry; blurry = 0;
+ }
+ if( !blurry )
+ blurry = new VFrame(src_w, src_h, BC_YUV888);
+
+ overlay_frame->overlay(tmp_frame, src,
+ 0,0,src_w,src_h, 0,0,tw,th, 1.f, TRANSFER_NORMAL, LINEAR_LINEAR);
+ overlay_frame->overlay(blurry, tmp_frame,
+ 0,0,tw,th, 0,0,src_w,src_h, 1.f, TRANSFER_NORMAL, CUBIC_CUBIC);
+}
+
+void DeScratchMain::copy(int comp)
+{
+ uint8_t **src_rows = src->get_rows();
+ uint8_t **dst_rows = dst->get_rows();
+ for( int y=0; y<src_h; ++y ) {
+ uint8_t *sp = src_rows[y] + comp, *dp = dst_rows[y] + comp;
+ for( int x=0; x<src_w; ++x,sp+=3,dp+=3 ) *sp = *dp;
+ }
+}
+
+void DeScratchMain::plane_pass(int comp, int mode)
+{
+ int threshold = config.threshold;
+ if( comp != 0 ) threshold /= 2; // fakey UV scaling
+ switch( mode ) {
+ case MODE_ALL:
+ pass(comp, threshold);
+ copy(comp);
+ case MODE_HIGH: // fall thru
+ threshold = -threshold;
+ case MODE_LOW: // fall thru
+ pass(comp, threshold);
+ break;
+ }
+}
+
+int DeScratchMain::process_realtime(VFrame *input, VFrame *output)
+{
+ load_configuration();
+ src_w = input->get_w();
+ src_h = input->get_h();
+ if( src_w >= 2*config.max_width+3 ) {
+ if( !overlay_frame ) {
+ int cpus = PluginClient::smp + 1;
+ if( cpus > 8 ) cpus = 8;
+ overlay_frame = new OverlayFrame(cpus);
+ }
+ if( src && (src->get_w() != src_w || src->get_h() != src_h) ) {
+ delete src; src = 0;
+ }
+ if( !src ) src = new VFrame(src_w, src_h, BC_YUV888);
+ src->transfer_from(input);
+ if( dst && (dst->get_w() != src_w || dst->get_h() != src_h) ) {
+ delete dst; dst = 0;
+ }
+ if( !dst ) dst = new VFrame(src_w, src_h, BC_YUV888);
+ dst->copy_from(src);
+ int sz = src_w * src_h;
+ if( sz_inf != sz ) { delete [] inf; inf = 0; }
+ if( !inf ) inf = new uint8_t[sz_inf=sz];
+ blur(config.blur_len + 1);
+ plane_pass(0, config.mode_y);
+ plane_pass(1, config.mode_u);
+ plane_pass(2, config.mode_v);
+ output->transfer_from(dst);
+ }
+ return 0;
+}
+
+void DeScratchMain::update_gui()
+{
+ if( !thread ) return;
+ DeScratchWindow *window = (DeScratchWindow *)thread->get_window();
+ window->lock_window("DeScratchMain::update_gui");
+ if( load_configuration() )
+ window->update_gui();
+ window->unlock_window();
+}
+
+NEW_WINDOW_MACRO(DeScratchMain, DeScratchWindow)
+
+
+DeScratchWindow::DeScratchWindow(DeScratchMain *plugin)
+ : PluginClientWindow(plugin, 512, 256, 512, 256, 0)
+{
+ this->plugin = plugin;
+}
+
+DeScratchWindow::~DeScratchWindow()
+{
+}
+
+void DeScratchWindow::create_objects()
+{
+ int x = 10, y = 10;
+ plugin->load_configuration();
+ DeScratchConfig &config = plugin->config;
+
+ BC_Title *title;
+ add_tool(title = new BC_Title(x, y, _("DeScratch:")));
+ y += title->get_h() + 5;
+ int x1 = x, x2 = get_w()/2;
+ add_tool(title = new BC_Title(x1=x, y, _("threshold:")));
+ x1 += title->get_w()+16;
+ add_tool(threshold = new DeScratchISlider(this, x1, y, x2-x1-10, 0,64, &config.threshold));
+ add_tool(title = new BC_Title(x1=x2, y, _("asymmetry:")));
+ x1 += title->get_w()+16;
+ add_tool(asymmetry = new DeScratchISlider(this, x1, y, get_w()-x1-15, 0,64, &config.asymmetry));
+ y += threshold->get_h() + 10;
+
+ add_tool(title = new BC_Title(x1=x, y, _("Mode:")));
+ x1 += title->get_w()+16;
+ add_tool(title = new BC_Title(x1, y, _("y:")));
+ int w1 = title->get_w()+16;
+ add_tool(y_mode = new DeScratchMode(this, (x1+=w1), y, &config.mode_y));
+ y_mode->create_objects(); x1 += y_mode->get_w()+16;
+ add_tool(title = new BC_Title(x1, y, _("u:")));
+ add_tool(u_mode = new DeScratchMode(this, (x1+=w1), y, &config.mode_u));
+ u_mode->create_objects(); x1 += u_mode->get_w()+16;
+ add_tool(title = new BC_Title(x1, y, _("v:")));
+ add_tool(v_mode = new DeScratchMode(this, (x1+=w1), y, &config.mode_v));
+ v_mode->create_objects();
+ y += y_mode->get_h() + 10;
+
+ add_tool(title = new BC_Title(x1=x, y, _("width:")));
+ w1 = title->get_w()+16; x1 += w1;
+ add_tool(title = new BC_Title(x1, y, _("min:")));
+ x1 += title->get_w()+16;
+ add_tool(min_width = new DeScratchISlider(this, x1, y, x2-x1-10, 0,16, &config.min_width));
+ add_tool(title = new BC_Title(x1=x2, y, _("max:")));
+ x1 += title->get_w()+16;
+ add_tool(max_width = new DeScratchISlider(this, x1, y, get_w()-x1-15, 0,16, &config.max_width));
+ y += min_width->get_h() + 10;
+
+ add_tool(title = new BC_Title(x1=x, y, _("len:")));
+ w1 = title->get_w()+16; x1 += w1;
+ add_tool(title = new BC_Title(x1, y, _("min:")));
+ x1 += title->get_w()+16;
+ add_tool(min_len = new DeScratchFSlider(this, x1, y, x2-x1-10, 0.0,100.0, &config.min_len));
+ add_tool(title = new BC_Title(x1=x2, y, _("max:")));
+ x1 += title->get_w()+16;
+ add_tool(max_len = new DeScratchFSlider(this, x1, y, get_w()-x1-15, 0.0,100.0, &config.max_len));
+ y += min_len->get_h() + 10;
+
+ add_tool(title = new BC_Title(x1=x, y, _("len:")));
+ w1 = title->get_w()+16; x1 += w1;
+ add_tool(title = new BC_Title(x1, y, _("blur:")));
+ x1 += title->get_w()+16;
+ add_tool(blur_len = new DeScratchISlider(this, x1, y, x2-x1-10, 0,16, &config.blur_len));
+ add_tool(title = new BC_Title(x1=x2, y, _("gap:")));
+ x1 += title->get_w()+16;
+ add_tool(gap_len = new DeScratchFSlider(this, x1, y, get_w()-x1-15, 0.0,100.0, &config.gap_len));
+ y += blur_len->get_h() + 10;
+
+ add_tool(title = new BC_Title(x1=x, y, _("max angle:")));
+ w1 = title->get_w()+16; x1 += w1;
+ add_tool(max_angle = new DeScratchFSlider(this, x1, y, x2-x1-10, 0.0,90.0, &config.max_angle));
+ add_tool(title = new BC_Title(x1=x2, y, _("fade:")));
+ x1 += title->get_w()+16;
+ add_tool(ffade = new DeScratchFSlider(this, x1, y, get_w()-x1-15, 0.0,100.0, &config.ffade));
+ y += max_angle->get_h() + 10;
+
+ add_tool(title = new BC_Title(x1=x, y, _("border:")));
+ x1 += title->get_w()+16;
+ add_tool(border = new DeScratchISlider(this, x1, y, x2-x1-10, 0,16, &config.border));
+ add_tool(mark = new DeScratchMark(this, x1=x2, y));
+ w1 = DeScratchReset::calculate_w(this, _("Reset"));
+ add_tool(reset = new DeScratchReset(this, get_w()-w1-15, y));
+
+ show_window();
+}
+
+void DeScratchWindow::update_gui()
+{
+ DeScratchConfig &config = plugin->config;
+ y_mode->update(config.mode_y);
+ u_mode->update(config.mode_u);
+ v_mode->update(config.mode_v);
+ min_width->update(config.min_width);
+ max_width->update(config.max_width);
+ min_len->update(config.min_len);
+ max_len->update(config.max_len);
+ blur_len->update(config.blur_len);
+ gap_len->update(config.gap_len);
+ max_angle->update(config.max_angle);
+ ffade->update(config.ffade);
+ mark->update(config.mark);
+}
+
+
+DeScratchModeItem::DeScratchModeItem(DeScratchMode *popup, int type, const char *text)
+ : BC_MenuItem(text)
+{
+ this->popup = popup;
+ this->type = type;
+}
+
+DeScratchModeItem::~DeScratchModeItem()
+{
+}
+
+int DeScratchModeItem::handle_event()
+{
+ popup->update(type);
+ return popup->handle_event();
+}
+
+DeScratchMode::DeScratchMode(DeScratchWindow *win, int x, int y, int *value)
+ : BC_PopupMenu(x, y, 64, "", 1)
+{
+ this->win = win;
+ this->value = value;
+}
+
+DeScratchMode::~DeScratchMode()
+{
+}
+
+void DeScratchMode::create_objects()
+{
+ add_item(new DeScratchModeItem(this, MODE_NONE, _("None")));
+ add_item(new DeScratchModeItem(this, MODE_LOW, _("Low")));
+ add_item(new DeScratchModeItem(this, MODE_HIGH, _("High")));
+ add_item(new DeScratchModeItem(this, MODE_ALL, _("All")));
+ set_value(*value);
+}
+
+int DeScratchMode::handle_event()
+{
+ win->plugin->send_configure_change();
+ return 1;
+}
+
+void DeScratchMode::update(int v)
+{
+ set_value(*value = v);
+}
+
+void DeScratchMode::set_value(int v)
+{
+ int i = total_items();
+ while( --i >= 0 && ((DeScratchModeItem*)get_item(i))->type != v );
+ if( i >= 0 ) set_text(get_item(i)->get_text());
+}
+
+DeScratchISlider::DeScratchISlider(DeScratchWindow *win,
+ int x, int y, int w, int min, int max, int *output)
+ : BC_ISlider(x, y, 0, w, w, min, max, *output)
+{
+ this->win = win;
+ this->output = output;
+}
+
+DeScratchISlider::~DeScratchISlider()
+{
+}
+
+int DeScratchISlider::handle_event()
+{
+ *output = get_value();
+ win->plugin->send_configure_change();
+ return 1;
+}
+
+DeScratchFSlider::DeScratchFSlider(DeScratchWindow *win,
+ int x, int y, int w, float min, float max, float *output)
+ : BC_FSlider(x, y, 0, w, w, min, max, *output)
+{
+ this->win = win;
+ this->output = output;
+}
+
+DeScratchFSlider::~DeScratchFSlider()
+{
+}
+
+int DeScratchFSlider::handle_event()
+{
+ *output = get_value();
+ win->plugin->send_configure_change();
+ return 1;
+}
+
+DeScratchMark::DeScratchMark(DeScratchWindow *win, int x, int y)
+ : BC_CheckBox(x, y, &win->plugin->config.mark, _("Mark"))
+{
+ this->win = win;
+};
+
+DeScratchMark::~DeScratchMark()
+{
+}
+
+int DeScratchMark::handle_event()
+{
+ int ret = BC_CheckBox::handle_event();
+ win->plugin->send_configure_change();
+ return ret;
+}
+
+DeScratchReset::DeScratchReset(DeScratchWindow *win, int x, int y)
+ : BC_GenericButton(x, y, _("Reset"))
+{
+ this->win = win;
+}
+
+int DeScratchReset::handle_event()
+{
+ win->plugin->config.reset();
+ win->update_gui();
+ win->plugin->send_configure_change();
+ return 1;
+}
+
projects / goodguy / history.git / commitdiff