combines them to 1920x540 interlaced image.
AgingTV: Use to achieve an "old" movie or TV show
effect by adding moving lines and snow.
+Alpha: Vary the alpha value from 0-completely transparent
+ to 1-no transparency at all.
Auto Scale: Automatically scale to a specified size.
Blue Banana: Used for color transformation or remapping as
well as chroma-key filtering. See Manual for usage:
4) adjust your color choice as desired
Blur: Blurs a video track in horizontal and/or
vertical in chosen color channels.
+BoxBlur: Blurs the input video. This fairly fast blur is
+ based on ffmpeg's, and blurs in horizontal and/or
+ vertical with power.
Brightness/Contrast: Use to change the brightness or
contrast, but could reduce quality.
BurningTV: Makes your video "burn" where there are
as you specify.
Color Balance: Modify RGB colors or white balance to compensate
for errors in video such as low lighting.
+ColorSpace: Tweak colors from one color space/range to another
+ space=BT601/BT709/BT2020 range=MPEG/JPEG
CriKey: Regionally based chroma key with interpolation;
useful when you only want a specific zone defined.
.
up to down or vice versa.
FlowObj: Retards image motion as shown with optical flow. Uses
the OpenCV thirdparty package.
+Foreground: Provide a colored foreground of your choice.
Frames to fields: Extracts 2 interlaced fields stored in alternating
lines & outputs them as full frames.
Freeze Frame: Lowest numbered frame in highlighted area will play
replaces any video on the track.
Loop video: Loop video by specifying the length of the region to
loop.
+Mirror: Mirror horizontal or vertical with the ability to
+ swap left to right or top to bottom. And if enable
+ reflection center checked, can vary X/Y centering.
Mandelbrot: Render a Mandelbrot fractal using Cuda.
Motion: Tracks translation and rotation motion to stabilize
shaky video.
Polar: Bends and warps your video in weird ways based on
conversion from either polar coordinates to
rectangular or vice-versa.
+Posterize: Reduces the color depth so as to decrease the displayed
+ color gradients.
RGB - 601: Used to reduce/increase contrast in your video via
601 compression or RGB expansion.
RGBShift: Align 3 separate planes of R, G, B if misaligned in
ShiftInterlace: Shift the interlace lines using odd or even.
Sketcher: Sketch lines, curves, or points in different colors/
alpha and with fill using various pen widths/types.
+Speed PerCent: Change speed by a percentage value from 1 to 1000
+ with or without interpolation. A value of 100% means
+ normal speed; a value < 100% means slow motion
+ with duplication of missing frames without OpticFlow;
+ a value > 100% means fast with dropped frames.
Sphere Cam: Converts a fisheye image into panoramic projection.
Swap Frames: Swap frames with 0-1, 2-3, 4-5... or 1-2, 3-4, 5-6...
Swap channels: Swap R,G,B,Alpha with another color channel.
Time Average: Use to create trail patterns, or reduce noise in
still images. A number of frames is accumulated
and then divided by a divisor to the the average.
+TimeBlur: Use to blur a number of frames.
TimeFront: Performs spatio-temporal video warping.
+Timelapse Helper: Sets the number of frames to skip during playback.
Title: Add text/timestamp/background pngs to video along
with the ability to drag to a location if Drag on.
Flexible attributes in textbox (mouse right click):
#
# Description of FFmpeg Video Plugins
#
+F_allrgb: Generate all rgb colors.
+F_allyuv: Generate all yuv colors.
+F_addroi: Mark a region of interest in a video frame.
F_amplify: Amplify changes between successive video frames.
F_atadenoise: Apply an Adaptive Temporal Averaging Denoiser.
F_avgblur: Apply average blur filter.
+F_backgroundkey: Turns a static background into transparency.
F_bbox: Compute bounding box for each frame.
F_bench: Benchmarks part of a filtergraph.
+F_bilateral: Apply bilateral filter, spatial smoothing while
+ preserving edges.
F_bitplanenoise: Measure bit plane noise.
F_blackdetect: Detect video intervals that are (almost) black.
F_blackframe: Detect frames that are (almost) black.
+F_blockdetect: Determines blockiness of frames without altering the
+ input frames.
+F_blurdetect: Determines blurriness of frames without altering the
+ input frames.
F_boxblur: Blurs the input video. Through the settings you are
able to change the power and the radius of the
boxblur applied to luma, chroma and alpha.
F_bwdif: Deinterlaces the input image.
+F_cas: Apply Contrast Adaptive Sharpen filter to video.
+F_ccrepack: Repack CEA-708 closed caption metadata.
+F_cellauto: Create pattern generated by an elementart cellular
+ automaton.
F_chromahold: Turns a certain color range into gray.
F_chromakey: Turns a certain color into transparency. Operates on
YUV colors.
+F_chromakey_cuda: CUDA accelerated YUV colorspace color/chroma keying.
+F_chromanr: Reduce chrominance noise.
F_chromashift: Shift chroma.
F_ciescope: Video CIE scope.
F_color: Provide a uniformly colored input.
F_colorbalance: Adjusts the color balance.
F_colorchannelmixer: Adjusts colors by mixing color channels.
+F_colorchart: The colorchart source provides a colors checker chart.
+F_colorcontrast: Adjust color contrast between RGB components.
+F_colorcorrect: Adjust color white balance selectivity for blacks
+ and whites.
F_colorhold: Turns a certain color range into gray when RGB.
F_colorkey: Turns a certain color into transparency when RGB.
F_colorlevels: Adjusts the color levels.
F_colormatrix: Converts color matrix.
+F_colorize: Overlay a solid color on the video stream.
+F_colorspace: Converts color space/range.
+F_colorspectrum: Provides a color spectrum input.
+F_colortemperature: Adjust color temperature of video.
F_cover_rect: Find and cover a user specified object.
F_crop: Crops the input video.
F_cropdetect: Auto-detect crop size.
F_curves: Adjust components curves.
F_datascope: Video data analysis.
+F_dblur: Apply Directional blur filter.
F_dctdnoiz: Denoise frames using 2D DCT.
F_deband: Debands video.
F_deblock: Deblock video.
F_edgedetect: Detects and draws edge.
F_elbg: Apply posterize effect, using the ELBG algorithm.
F_entropy: Measure video frames entropy.
+F_epx: Scale the input using EPX algorithm.
F_eq: Adjusts brightness, contrast, gamma and saturation.
F_erosion: Applies erosion effect.
+F_estdif: Apply Edge Slope Tracing deinterlace.
+F_exposure: Adjust exposure of the video stream.
F_fade: Fade in/out input video.
F_fftdnoiz: Denoise frames using 3D FFT.
F_fftfilt: Apply arbitrary expressions to pixels in frequency
F_fspp: Applies Fast Simple Post-processing filter.
F_gblur: Apply Gaussian Blur filter.
F_gradfun: Debands video quickly using gradients.
+F_gradients: Draws a transparent gradient.
F_graphmonitor: Show various filtergraph stats.
+F_grayworld: A color constancy filter that applies color
+ correction based on the grayworld assumption.
F_greyedge: Estimates scene illumination by grey edge
assumption.
F_haldclutsrc: Provide an identity Hald CLUT.
F_hqdn3d: Applies a High Quality 3D Denoiser.
F_hqx: Scales the input by 2, 3 or 4 using the hq*x
magnification algorithm.
+F_hsvhold: Turns a certain HSV range into gray values.
+F_hsvkey: Turns a certain HSV range into transparency.
F_hue: Adjust the hue and saturation of the input video.
+F_huesaturation: Apply hue-saturation-intensity adjustments
+ to input video stream.
F_idet: Interlace detect Filter.
F_il: Deinterleaves or interleaves fields.
F_inflate: Applies inflate effect.
F_interlace: Convert progressive video into interlaced.
F_kerndeint: Applies kernel deinterlacing to the input.
+F_kirsch: Apply kirsch operator.
F_lagfun: Slowly update darker pixels.
+F_latency: Measure filtering latency.
F_lenscorrection: Rectifies the image by correcting for lens distortion.
F_life: Generate a life pattern.
F_limiter: Limit pixels components to the specified range.
F_mandelbrot: Render a Mandelbrot fractal.
F_maskfun: Create Mask.
F_mcdeint: Applies motion compensating deinterlacing.
+F_median: Pick median pixel from rectangle defined by radius.
F_mestimate: Generate motion vectors.
F_metadata: Manipulate video frame metadata.
+F_minterpolate: Frame rate conversion using Motion Interpolation.
+F_monochrome: Convert video to gray using custom color filter.
F_mpdecimate: Remove near-duplicate frames.
F_mptestsrc: Generate various test pattern.
F_negate: Negates input video.
F_perms: Set permissions for the output video frame.
F_perspective: Corrects the perspective of video.
F_phase: Phase shift fields.
+F_photosensitivity: Filter out photosensitive epilepsy seizure-inducing
+ flashes.
+F_pixelize: Apply pixelization to video stream.
F_pixscope: Pixel data analysis for checking color and levels.
It will display sample values of color channels.
F_pp: Filters video using libpostproc.
F_pp7: Applies Postprocessing 7 filter.
F_prewitt: Apply prewitt operator.
F_pseudocolor: Make pseudocolored video frames.
+F_pullup: Pullup from field sequence to frames.
F_readeia608: Read EIA-608 Closed Caption codes from
input video and write them to frame metadata.
F_readvitc: Reads vertical interval timecode and writes it to
F_scale: Scale the input video size and/or convert the image
format.
F_scale_cuda: GPU accelerated video resizer.
+F_scdet: Detect video scene change.
+F_scharr: Apply scharr operator to input video stream.
+F_scroll: Scroll input video horizontally and/or vertically
+ by constant speed.
+F_selectivecolor: Apply cmyk adjustments to specific color ranges.
F_separatefields: Split input video frames into fields.
F_setparams: Force field, or color property for the output video
frame.
F_setrange: Force color range for the output video frame.
+F_shear: Shear transform the input image.
F_showinfo: Show textual information for each video frame.
F_showpalette: Display frame palette.
F_shuffleframes: Shuffles video frames.
+F_shufflepixels: Shuffle video pixels.
F_shuffleplanes: Shuffles video planes.
+F_sierpinski: Generate a Sierpinski carpet/triangle fractal, and
+ randomly pan around.
F_signalstats: Separates statistics from video analysis.
+F_siti: Calculate Spatial Info (SI) and Temporal Info (TI) scores
+ for a video, as defined in ITU-T P.910:
+ Subjective video quality assessment methods for
+ multimedia applications.
F_smartblur: Blurs the input video without impacting the outlines.
Through the settings you can select the radius, the
strength and the threshold of luma and chroma.
F_tblend: Blend successive frames.
F_testsrc: Generate test pattern.
F_testsrc2: Generate another test pattern.
+F_thistogram: Compute and draw a color distribution histogram for
+ the input video across time.
F_tile: Tile several successive frames together.
F_tinterlace: Performs temporal field interlacing.
F_tlut2: Compute and apply a lookup table from two
successive frames.
+F_tmedian: Pick median pixels from successive frames.
+F_tmidequalizer: Apply Temporal Midway Equalization.
F_tmix: Mix successive video frames.
+F_tonemap: Conversion to/from different dynamic ranges.
F_transpose: Transposes input video.
F_transpose_vaapi: VAAPI VPP for transpose.
F_unsharp: Sharpen or blur the input video.
+F_untile: Untile a frame into a sequence of frames.
F_uspp: Applies Ultra Simple/Slow Post-processing filter.
+F_v360: Convert 360 videos between various formats.
F_vaguedenoiser: Applies a Wavelet based Denoiser.
F_vectorscope: Video vectorscope.
F_vflip: Flips the input video vertically.
F_xbr: Scales the input using xBR algorithm.
F_yadif: Deinterlaces the input image.
F_yadif_cuda: Deinterlace CUDA frames.
+F_yaepblur: Yet another edge preserving blur filter.
F_yuvtestsrc: Generate YUV test pattern.
F_zoompan: Applies Zoom & Pan effect.
+F_zoneplate: Generate zone-plate.
#
# Description of FFmpeg Audio Plugins
#
filter.
F_acrusher: Reduces audio bit resolution.
F_acue: Delay filtering to match a cue.
+F_adecorrelate: Apply decorrelation to input audio stream.
F_adelay: Delays one or more audio channels.
+F_adenorm: Remedy denormals by adding extremely low-level
+ noise.
F_aderivative: Compute derivative of input audio.
+F_adynamicequalizer: Apply dynamic equalization to input
+ audio stream.
+F_adrc: Audio spectral dynamic range controller.
+F_adynamicsmooth: Apply dynamic smoothing to input audio stream.
F_aecho: Adds echoing to the audio.
F_aemphasis: Audio emphasis.
F_aeval: Filters audio signal according to specific expression.
+F_aexciter: Enhance high frequency part of audio.
F_afade: Fades in/out input audio.
+F_afdelaysrc: Generate a fractional delay FIR coefficients.
F_aformat: Convert the input audio to the specified format.
+F_afreqshift: Apply frequency shifting to input audio.
+F_afwtdn: Reduce broadband noise from input samples using
+ Wavelets.
F_agate: Audio gate.
F_aiir: Apply infinite Impulse Response filter with supplied
coefficients.
F_aintegral: Compute integral of input audio.
+F_alatency: Measure filtering latency.
F_allpass: Applies a two-pole all-pass filter.
F_aloop: Loops audio samples.
F_ametadata: Manipulate audio frame metadata.
F_anoisesrc: Generates a noise audio signal.
F_aperms: Set permissions for the output audio frame.
F_aphaser: Adds a phasing effect to the audio.
+F_aphaseshift: Apply phase shifting to input audio.
+F_apsyclip: Apply Psychoacoustic clipper to input audio
+ stream.
F_arealtime: Slows down filtering to match realtime.
F_aresample: Resamples audio data.
F_asetrate: Change the sample rate without altering the data.
F_asoftclip: Apply audio soft clipping - a type of distortion effect
where signal amplitude is saturated along a smooth
curve.
+F_aspectralstats:Display frequency domain statistical
+ information about the audio channels.
+ Statistics are calculated and stored as metadata
+ for each audio channel and for each audio frame.
F_astats: Shows time domain statistics about audio frames.
+F_asubboost: Boost subwoofer frequencies.
+F_asubcut: Cut subwoofer frequencies.
+F_asupercut: Cut super frequencies.
+F_asuperpass: Apply high order Butterworth band-pass filter.
+F_asuperstop: Apply high order Butterworth band-stop filter.
F_atempo: Adjusts audio tempo.
+F_atilt: Apply spectral tilt filter to audio stream.
F_atrim: Pick one continuous section from the input and drop
the rest.
F_bandpass: Applies a two-pole Butterworth band-pass filter.
and then right mouse clicking all subsequent audio
tracks bringing up a menu. Highlight the effect
shown in the middle section and click OK.
+F_tiltshelf: Boost or cut the lower frequencies and cut or boost
+ higher frequencies of the audio using a two-pole
+ shelving filter with a response similar to that of
+ a standard hi-fi’s tone-controls.
+ This is also known as shelving equalisation (EQ).
F_treble: Boosts or cuts upper frequencies.
F_tremolo: Applies tremolo effect.
F_vibrato: Applies vibrato effect.
+F_virtualbass: Apply audio Virtual Bass filter.
F_volume: Change input volume.
F_volumedetect: Detect audio volume.
#
Compressor: Lessen the dynamic range between the loudest and
quietest parts of an audio signal by boosting the
quieter signals and attenuating the louder signals.
+Compressor Multi: Compressor that acts on 3 distinct frequency bands
+ instead of the entire singe sprectrum.
DC Offset: Remove DC Offset, which is usually an undesirable
characteristic of a recording normally caused by
defective equipment. (Has no controls)