-% Cover sheet with full logo,
+% ================================================================
+% Page 1 -- Cover sheet with full logo,
% realized with eso-pic as background image.
+%
\thispagestyle{empty}
\newcommand\CinBackgroundLogo{%
\put(0,0){%
% Remove the logo
\ClearShipoutPicture%
-% Title page definition
+
+% ================================================================
+% Page 2 -- Title page definition
+%
\thispagestyle{empty}
%\providecommand{\HUGE}{\Huge}% if not using memoir
\href{https://www.cinelerra-gg.org}{https://www.cinelerra-gg.org}\par
\endgroup}
\titleLL % use cutom title
+\clearpage
+
+% ================================================================
+% Page 3 -- Imprint
+%
+\begingroup % imprint
+\setlength{\parskip}{0.4\baselineskip}
+\subsection*{\sffamily\CGG{} -- The Comprehensive User Manual}
+\label{sec:Impressum}
+%
+% In various countries, various details are mandatory in every
+% book. Translators should pay attention to this if necessary.
+% German entries are mandatory: Real name and address of the
+% author/rights holder.
+% The following is an example that needs to be adapted to the
+% respective conditions.
+%
+Maintained and published by Phyllis Smith\\[+1.2em]
+Copyright~\copyright{} 2020 The \CGG{} Community\par
+Please report errors in the book to our \href{https://www.cinelerra-gg.org/bugtracker/}{bug tracker} or the \href{https://www.cinelerra-gg.org/forum/}{user forum}\par
+% Contributing authors: \textsc{Phyllis Smith, Andrea Paz, Andrey}\par
+Graphic cover page: \textsc{Sam}, License
+\textsc{\href{https://creativecommons.org/licenses/by/3.0/}{CC\,BY\,3.0}}\par
+Cover design: The \CGG{} Community\par
+Illustrations: The \CGG{} Community%, for individual proofs, if different, see list of figures% \par
+% Translation: Translator
+\bigskip%
+
+\footnotesize
+\subsubsection*{\sffamily{}Legal information}
+\label{sec:Legal-information}
+At this point, the express reference to the licence under which this
+manual is published could be entered.
+
+\subsubsection*{\sffamily{}Disclaimer}
+\label{sec:Disclaimer}
+%
+% Caution, in some countries a disclaimer often does
+% more harm than good.
+%
+In this capacity, the author of this manual is not responsible for
+the function or errors of the software described in this
+manual. Great care has been taken in the creation of texts and
+illustrations. Nevertheless, errors cannot be completely
+excluded.\par
+However, the author cannot assume any legal responsibility or
+liability for incorrect information and its consequences. The author
+is grateful for suggestions for improvement and information on
+errors.
+
+\subsubsection*{\sffamily{}Trademarks}
+\label{sec:Warenzeichen}
+In this manual, trade names are used without the guarantee of free
+usability and without special marking. However, it can be assumed
+that many of the trade names are registered trade names or are to be
+regarded as such at the same time.
+\subsubsection*{\sffamily{}Links}
+\label{sec:Link-liability}
+Many links in this PDF are active. If the pointer points to a link,
+your PDF reader should additionally display the actual destination
+address. This way you can check if the target matches the link
+description before clicking.
+\endgroup % imprint
%%% Local Variables:
%%% mode: latex
Click here for the
\href{http://www.bandshed.net/avlinux/}{homepage of AV Linux}.
-\subsection{Bodhi Linux}
+\subsection{Bodhi Linux Media}
\label{sec:Bodhi_Linux}
\textbf{Bodhi Linux Media} is a free and open source distribution that
window to the low and high ends of the desired range. For example, 1.000 to 50.000, which makes it
so you can drag the speed/fade handle all the way to the left for 1.000 or all the way to the right for 50.
-Figure~\ref{fig:always} shows orange keyframes and lines for the ganged speed automation on all video/audio tracks.
-Note the status bar numbers in the lower left-hand corner displaying 2.17 seconds as the location and 0.38 as the playback rate. The figure also shows the orange speed slider bar triangle with the current value displayed via the tooltip.
+Figure~\ref{fig:always} shows orange keyframes and lines for the ganged speed automation on all video/audio tracks. The figure shows the orange speed slider bar triangle with the current value displayed via the tooltip. Note the status bar numbers in the lower lefthand corner displaying 01:08 seconds as the location and 2.05 as the playback rate.
\begin{figure}[htpb]
\centering
\item Choose the size and other options you want and click the checkmark OK. If you choose the option \textit{Beep when done} you will hear a short beep if all media is already proxied or a longer beep when all proxies have been created.
\item When your editing is complete, use \textit{Settings} pulldown and proxy to \textit{original size}.
\end{enumerate}
-
Instead of Open Mixers, you can Insert Mixers with new tracks at the timeline insertion point.
+\begin{figure}[htpb]
+ \centering
+ \includegraphics[width=1.0\linewidth]{mixer-playable.png}
+ \caption{A Mixer window showing available options with the white X designating no playing}
+ \label{fig:mixer-playable}
+\end{figure}
+
+\subsubsection*{Options available in the \textit{Mixer Windows}}%
+\label{ssub:options_available_with_mixers}
+
+There are several options you will see in each Mixer window that help with using them. These
+are shown in figure~\ref{fig:mixer-playable}. To use these, RMB in the desired mixer window,
+and choose one of the options as described here.
+
+\begin{enumerate}
+ \item Fullscreen / Windowed - will bring up a fullscreen display of that window or revert to the original size.
+ \item Resize Window - allows for resizing the window to a choice of different sizes.
+ \item Tile Mixers - makes it easy to get all of the mixers nicely tiled to a standard size.
+This is also available in the Window pulldown.
+ \item Playable - enabled by default so that you will see a checkmark next to it in the
+popup. The benefit of making a mixer window not playable is to save cpu time. When a specific
+mixer window is unchecked, so not Playable, a white cross appears in the upper left hand corner
+of the mixer. To switch back to playing again, RMB and choose Playable and this will turn
+playing back on. The program automatically updates the mixer image when the timeline cursor
+stops or when it is moved to a different spot even when play is disabled. You can see the
+white cross designating not playable in figure~\ref{fig:mixer-playable}. Statistics that show
+the savings are as follows on a 16 cpu laptop:
+\begin{verbatim}
+ 5 Mixers all playing -- cpu usage = 1275
+ 1 only playing -- cpu usage = 405
+ 2 only playing -- cpu usage = 800
+\end{verbatim}
+\end{enumerate}
+
\subsection{Mixer Align by Audio}%
\label{sub:mixer_align_audio}
\centering
\begin{tikzpicture}[scale=1, transform shape]
\node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.5\linewidth]{plugin-icons.png}};
- \node [yshift=-8mm, xshift=-1cm,anchor=east] at (img1.north west) (Preferences) {Preferences Window};
- \node [yshift=-17mm, xshift=-1cm,anchor=east] at (img1.north west) (Tab) {Tab section};
- \node [yshift=-41mm, xshift=-1cm,anchor=east] at (img1.north west) (Icon) {Plugin icon choices};
- \draw [->, line width=1mm] (Preferences) edge ([yshift=-8mm] img1.north west);
- \draw [->, line width=1mm] (Tab) edge ([yshift=-17mm] img1.north west);
- \draw [->, line width=1mm] (Icon) edge ([yshift=-41mm] img1.north west);
+ \node [yshift=-6mm, xshift=-1cm,anchor=east] at (img1.north west) (Preferences) {Preferences Window};
+ \node [yshift=-14mm, xshift=-1cm,anchor=east] at (img1.north west) (Tab) {Tab section};
+ \node [yshift=-35mm, xshift=-1cm,anchor=east] at (img1.north west) (Icon) {Plugin icon choices};
+ \draw [->, line width=1mm] (Preferences) edge ([yshift=-6mm] img1.north west);
+ \draw [->, line width=1mm] (Tab) edge ([yshift=-14mm] img1.north west);
+ \draw [->, line width=1mm] (Icon) edge ([yshift=-35mm] img1.north west);
\end{tikzpicture}
\caption{Screencast showing the screen to change your plugin icons set}
\label{fig:plugin-icons}
\end{wrapfigure}
Note that using this is directly changing a keyframe object so you will only want to modify parameters you are familiar with. Most of the data is obvious and safe to change.
-A Presets button on the plugin bar to the left of the Controls and On/Off button allows for quick access to this feature. The symbol resembles a gear (figure~\ref{fig:preset02}).
- %\todo{I can't to remedy}%
+A Presets button on the plugin bar to the left of the Controls and On/Off button allows for quick access to this feature. The symbol resembles a slider (figure~\ref{fig:preset02}).
\begin{figure}[htpb]
\centering
\begin{tikzpicture}[scale=1, transform shape]
\node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.6\linewidth]{preset02.png}};
- \node [yshift=-30mm, xshift=-1cm,anchor=east] at (img1.north west) (Green) {A user preset Green};
- \node [yshift=-101mm, xshift=-1cm,anchor=south east,text width=10em, inner ysep=-3mm] at (img1.north west) (Textbox) {Textbox to type in the title for the chosen preset or name for a new preset.};
- \node [yshift=-110mm, xshift=-1cm,anchor=north east,text width=10em,inner ysep=-3mm] at (img1.north west) (Save) {Use the Delete, Save or Apply button for operation.};
- \draw [->, line width=1mm] (Green) edge ([yshift=-30mm] img1.north west);
- \draw [->, line width=1mm] (Textbox.south east) -- ([yshift=-101mm] img1.north west);
- \draw [->, line width=1mm] (Save.north east) -- ([yshift=-110mm] img1.north west);
+ \node [yshift=-20mm, xshift=-1cm,anchor=east] at (img1.north west) (Green) {A user preset Green};
+ \node [yshift=-68mm, xshift=-1cm,anchor=south east,text width=10em, inner ysep=-3mm] at (img1.north west) (Textbox) {Textbox to type in the title for the chosen preset or name for a new preset.};
+ \node [yshift=-80mm, xshift=-1cm,anchor=north east,text width=10em,inner ysep=-3mm] at (img1.north west) (Save) {Use the Delete, Save or Apply button for operation.};
+ \draw [->, line width=1mm] (Green) edge ([yshift=-20mm] img1.north west);
+ \draw [->, line width=1mm] (Textbox.south east) -- ([yshift=-68mm] img1.north west);
+ \draw [->, line width=1mm] (Save.north east) -- ([yshift=-80mm] img1.north west);
\end{tikzpicture}
\caption{Screencast shows 4 Factory presets as preceded by an *.}
\label{fig:preset02}
\subsection{How to see short Description of a Plugin}%
\label{sub:short_description_plugin}
-To get a short one or a few lines description of a plugin, right click on that plugin in the Resources window and when the popup menu appears, select \textit{Info}. Some of the plugins may not have any description included. An example screenshot is next (figure~\ref{fig:info-effect}).
+To get a short one or a few lines description of a plugin, mouse over that plugin in the Resources window and a popup appears. You can disable the popup by right-clicking and choosing \textit{Info Off} (shortcut "i"). And again enable it with \textit{Info On}. Some of the plugins may not have any description included. An example screenshot is next (figure~\ref{fig:info-effect}).
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.7\linewidth]{info-effect.png}
+ \includegraphics[width=0.8\linewidth]{info-effect.png}
\caption{Effect Info for Color 3 Way}
\label{fig:info-effect}
\end{figure}
\begin{figure}[htpb]
\centering
\includegraphics[width=0.8\linewidth]{expander.png}
- \caption{$\bigtriangledown$, $\rhd$ =expander; "-" = options}
+ \caption{$\triangledown$,$\triangleright$ = expander; "-" = options}
\label{fig:expander}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.7\linewidth]{equalizer.png}
+ \includegraphics[width=0.8\linewidth]{equalizer.png}
\caption{Graphic Equalizer audio plugin}
\label{fig:equalizer}
\end{figure}
\begin{figure}[htpb]
\centering
\includegraphics[width=0.4\linewidth]{eq_param.png}
- \caption{Graphic Equalizer audio plugin}
+ \caption{EQ Parametric audio plugin}
\label{fig:eq_param}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.5\linewidth]{flanger.png}
+ \includegraphics[width=0.6\linewidth]{flanger.png}
\caption{GUI of configuration for Flanger plugin}
\label{fig:flanger}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.5\linewidth]{reverb.png}
+ \includegraphics[width=0.6\linewidth]{reverb.png}
\caption{GUI of configuration for Reverb plugin}
\label{fig:reverb}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.9\linewidth]{reload.png}
+ \includegraphics[width=1.0\linewidth]{reload.png}
\caption{Reload plugin index in yellow and Auto start lv2 gui unchecked}
\label{fig:reload}
\end{figure}
projects / goodguy / cin-manual-latex.git / commitdiff
