improved formatting by Andrea

diff --git a/parts/Installation.tex b/parts/Installation.tex
index c83c456a7ac1f4ef710b59160e5942c45685b8f8..8d99747aa0dd77a76324ebb63f547d9c252f1f75 100644 (file)
--- a/parts/Installation.tex
+++ b/parts/Installation.tex
@@ -451,54 +451,52 @@ the library interfaces exist.  Below is the list of thirdparty
 builds, but this list may have changed over time.
 % It's list of Table?
 
-\begin{table}[htpb]
-  \centering
-  \caption{List of thirdparty builds}
-  \label{tab:List_of_thirdparty_builds}
-  \small
-  \begin{tabular}{m{8em}c}
-    \toprule
-       a52dec   & yes\\
-       djbfft   & yes\\
-       ffmpeg   & yes\\
-       fftw     & auto\\
-       flac     & auto\\
-       giflib   & yes\\
-       ilmbase  & auto\\
-       lame     & auto\\
-       libavc1394&auto\\
-       libraw1394&auto\\
-       libiec61883&auto\\
-    libdv     &auto\\
-       libjpeg   &auto\\
-       opus      &auto\\
-       openjpeg  &auto\\
-       libogg    &auto\\
-       libsndfile&auto\\
-       libtheora&auto\\
-       libuuid  & yes\\
-       libvorbis&auto\\
-       mjpegtools&yes\\
-       openexr   &auto\\
-    tiff      &auto\\
-       twolame   &auto\\
-       x264      &auto\\
-       x265      &auto\\
-       libvpx    &auto\\
-       lv2       &auto\\
-       sratom    &auto\\
-       serd      &auto\\
-       sord      &auto\\
-       lilv      &auto\\
-       suil      &auto\\
-       libaom    &auto\\
-       dav1d     &auto\\
-    libwebp   &auto\\
-       ffnvcodec &auto\\
-    \bottomrule
-  \end{tabular}
-\end{table}
-
+\begin{center}
+       \small
+       \begin{longtable}{m{8em} c}             
+               \caption{List of thirdparty builds}
+               \label{tab:List_of_thirdparty_builds}\\
+               \toprule
+               a52dec   & yes\\
+               djbfft   & yes\\
+               ffmpeg   & yes\\
+               fftw     & auto\\
+               flac     & auto\\
+               giflib   & yes\\
+               ilmbase  & auto\\
+               lame     & auto\\
+               libavc1394&auto\\
+               libraw1394&auto\\
+               libiec61883&auto\\
+               libdv     &auto\\
+               libjpeg   &auto\\
+               opus      &auto\\
+               openjpeg  &auto\\
+               libogg    &auto\\
+               libsndfile&auto\\
+               libtheora&auto\\
+               libuuid  & yes\\
+               libvorbis&auto\\
+               mjpegtools&yes\\
+               openexr   &auto\\
+               tiff      &auto\\
+               twolame   &auto\\
+               x264      &auto\\
+               x265      &auto\\
+               libvpx    &auto\\
+               lv2       &auto\\
+               sratom    &auto\\
+               serd      &auto\\
+               sord      &auto\\
+               lilv      &auto\\
+               suil      &auto\\
+               libaom    &auto\\
+               dav1d     &auto\\
+               libwebp   &auto\\
+               ffnvcodec &auto\\
+               \bottomrule
+       \end{longtable}
+\end{center}
 
 The \textit{yes} means force build and \textit{auto} means probe and
 use the system version if the build operation is not static.  To get
@@ -746,7 +744,7 @@ on your system.
 \label{sec:building_the_manual}
 \index{context help}
 
-In addition to compiling your own \CGG{}, you should also build an html version of the manual that is needed for Context Help in the program. The main version of the manual is in latex to produce a pdf version of the manual and this is required to be built first as the basis for the html version. This means that you need a full latex environment, git, and the latex2html program in order to eventually create the html version. Texlive is about 1 GB; Latex2html itself has many requirements and missing any will result in failure: some requirments include Netpbm, GhostScript, dvips, etc.  Latex2html must be at least version "2021.2" in order to create the html manual version from the latex.
+In addition to compiling your own \CGG{}, you should also build an html version of the manual that is needed for Context Help in the program. The main version of the manual is in latex to produce a pdf version of the manual and this is required to be built first as the basis for the html version. This means that you need a full latex environment, git, and the latex2html program in order to eventually create the html version. Texlive is about 1 GB; Latex2html itself has many requirements and missing any will result in failure: some requirments include Netpbm, GhostScript, dvips, etc.  Latex2html must be at least version \textit{2021.2} in order to create the html manual version from the latex.
 
 The steps are as follows:
 \begin{enumerate}
@@ -756,30 +754,32 @@ The steps are as follows:
 git clone "git://git.cinelerra-gg.org/goodguy/cin-manual-latex.git" master
 \end{lstlisting}
 
-       \item Included in the download is the \textit{translate\_manual} script. After modifying this file to have execute permission, run this script from a terminal window in the \textit{master} directory where it was downloaded (be aware that this script includes several \textit{rm} commands):
+       \item Included in the download is the \texttt{translate\_manual} script. After modifying this file to have execute permission, run this script from a terminal window in the \textit{master} directory where it was downloaded (be aware that this script includes several \textit{rm} commands):
 \begin{lstlisting}[style=sh]
 ./translate_manual
 \end{lstlisting}
 
-The PDF document will be produced from the latex source in the \textit{master} directory. Since the glossary and index are also present, it has to run the pdf build several times. The following commands in the \textit{translate\_manual} script produce the PDF document from latex source which includes invoking makeindex for the Index and Glossary.
-
-\begin{lstlisting}[style=sh]
-pdflatex CinelerraGG_Manual.tex
-makeindex CinelerraGG_Manual.idx
-pdflatex CinelerraGG_Manual.tex
-makeindex CinelerraGG_Manual.nlo -s nomencl.ist -o CinelerraGG_Manual.nls
-pdflatex CinelerraGG_Manual.tex
-\end{lstlisting}
-
-After these commands are executed you will have the manual only in PDF format.  So if you only want a PDF version, you only need to run these previous 5 lines but Context Help from the program will not be available with the PDF version.
-
-       \item Next, to produce HTML output the script then moves (renames) latex2html-init to .latex2html-init (starting with dot).
-
-       \item Finally latex2html is run with a unique set of parameters and some cleanup is performed.  The script uses latex2html. It creates the directory CinelerraGG\_Manual containing all the files of the manual in html:  tables, references, index, glossary, and various images.
-
-       \item After installation of the \CGG{} program, place the complete unchanged directory CinelerraGG\_Manual, as it was produced by latex2html from the manual package, into the 'doc' directory of the installed Cinelerra package. This will be the directory bin/doc/CinelerraGG\_Manual if \CGG{} was built --with-single-user. The script ContextManual.pl will automatically be in bin/doc after the successful build of the program. It is this perl script that allows the program to access CinelerraGG\_Manual to offer Context Help.
-
-       \item Optionally you can make some adjustments to the latex2html command line in the \textit{translate\_manual} script. Some variants are shown in the comments inside the script but changes may impact the usability of Alt/h hotkey from the program.
+       The steps that this script performs are as follows:
+       \begin{itemize}
+               \item PDF production. The PDF document will be produced from the latex source in the \textit{master} directory. Since the glossary and index are also present, it has to run the pdf build several times. The following commands in the \texttt{translate\_manual} script produce the PDF document from latex source which includes invoking makeindex for the Index and Glossary.
+               
+               \begin{lstlisting}[style=sh]
+                       pdflatex CinelerraGG_Manual.tex
+                       makeindex CinelerraGG_Manual.idx
+                       pdflatex CinelerraGG_Manual.tex
+                       makeindex CinelerraGG_Manual.nlo -s nomencl.ist -o CinelerraGG_Manual.nls
+                       pdflatex CinelerraGG_Manual.tex
+               \end{lstlisting}
+               
+               After these commands are executed you will have the manual only in PDF format.  So if you only want a PDF version, you only need to run these previous 5 lines but Context Help from the program will not be available with the PDF version.
+               \item Next, to produce HTML output the script then moves (renames) \texttt{latex 2html-init} to \texttt{.latex2html-init} (starting with dot).
+               
+               \item Then the script uses latex2html: latex2html is run with a unique set of parameters and some cleanup is performed. It creates the directory CinelerraGG\_Manual containing all the files of the manual in html:  tables, references, index, glossary, and various images.
+       \end{itemize}
+
+       \item After installation of the \CGG{} program, place the complete unchanged directory \texttt{CinelerraGG\_Manual}, as it was produced by latex2html from the manual package, into the \textit{doc} directory of the installed Cinelerra package. This will be the directory \textit{bin/doc/CinelerraGG\_Manual} if \CGG{} was built \texttt{--with-single-user}. The script ContextManual.pl will automatically be in bin/doc after the successful build of the program. It is this perl script that allows the program to access CinelerraGG\_Manual to offer Context Help.
+
+       \item Optionally you can make some adjustments to the latex2html command line in the \texttt{translate\_manual} script. Some variants are shown in the comments inside the script but changes may impact the usability of Alt/h hotkey from the program.
 \end{enumerate}
 
 \section{Windows 10 with Cygwin for \CGG{} Limited}%