5 Rendering takes a section of the timeline, \index{active region} performs all the editing,
6 effects and compositing, and creates a new media file. You can then
7 delete all the source assets, play the rendered file, or bring it
8 back into \CGG{} for more editing. All rendering operations are
9 based on a region of the timeline to be rendered. You need to
10 define this region on the timeline. The rendering functions define
11 the region based on a set of rules. When a region is highlighted or
12 in/out points are set, the affected region is rendered. When no
13 region is highlighted, everything after the insertion point is
14 rendered. By positioning the insertion point at the beginning of a
15 track and unsetting all in/out points, the entire track is rendered.
16 But you also have the choice to render \textit{one frame}. Reminder,
17 \CGG{} does not do remuxing without rendering - see \nameref{sec:transcode}.
19 \section{Single File Rendering}%
20 \label{sec:single_file_rendering}
21 \index{rendering!single file}
23 Use the \textit{File} pulldown and select Render to start the render dialog
24 (figure~\ref{fig:render}). Then choose the desired parameters.
26 \begin{figure}[htpb] \centering
27 \includegraphics[width=0.5\linewidth]{render.png}
28 \caption{Example of the Render menu}
33 \item[Select a file to render to:] enter the path and filename to
34 write the rendered file to in the textbox below.
35 \item[File Format:] \index{file format} use the down arrow to see file format options.
36 For ffmpeg, which has its own set of options, you will then have to
37 select an ffmpeg file type from the down arrow choices. The format
38 of the file determines whether you can render audio or video or
40 \item[Render audio tracks:] check this toggle to generate audio
42 \item[Render video tracks:] check this toggle to generate video
43 tracks. The Render window will sometimes automatically update the
44 Render Audio Tracks or Render Video Tracks checkbox as allowed by
45 the chosen file format, but you should always check
46 (figure~\ref{fig:render01}). For example, if the PNG file format is
47 selected, only the \textit{Render Video Tracks} will be checked. Or
48 if an ffmpeg format is chosen and the file format does not render
49 audio, the \textit{Render Audio Tracks} will be unchecked. The
50 invalid choices will be ghosted out.
53 \begin{figure}[htpb] \centering
54 \includegraphics[width=0.7\linewidth]{render01.png}
55 \caption{Audio and Video tracks automatically checked for Pro file
61 \item[Wrench:] \index{wrench} select the \textit{wrench} next to each toggle to set
62 compression parameters. If the file format can not store audio or
63 video the compression parameters will be blank. If \textit{Render
64 audio tracks} or \textit{Render video tracks} is selected and the
65 file format does not support it, trying to render will result in an
66 error message. More details in the section:
67 \nameref{sub:extra_cin_option_ffmpeg}
68 \item[Create new file at each label] the option causes a new file to
69 be created when every label in the timeline is encountered – a
70 separate file for each. This is useful for dividing long audio
71 recordings into individual tracks. When using the Render Farm
72 (described later), \textit{Create new file at each label} causes one
73 render farm job to be created at every label instead of using the
74 internal load balancing algorithm to space jobs. If the filename
75 given in the render dialog has a 2 digit number in it, the 2 digit
76 number is overwritten with a different incremental number for every
77 output file. If no 2 digit number is given, \CGG{} automatically
78 concatenates a number to the end of the given filename for every
79 output file. For example, in the filename
80 \texttt{/movies/track01.wav} the $01$ would be overwritten for every
81 output file. The filename \texttt{/movies/track.wav}; however,
82 eventually would become \texttt{/movies/track.wav001} and so on.
83 Filename regeneration is only used when either render farm mode is
84 active or creating new files for every label is active.
85 \item[Render range:] \index{active region} choices are \textit{Project} \index{project},
86 \textit{Selection}, \textit{In/Out points}, and \textit{One Frame}
87 for single images like Tiff. For these images, Render range will
88 have \textit{One Frame} automatically checked and all of the others
89 ghosted since nothing else makes sense (figure~\ref{fig:render02}).
90 This makes it easy to set the insertion point where you want the 1
91 frame to be rendered rather than having to precisely zoom in to set
92 the in/out pointers. Note that whichever Render range is checked,
93 remains checked so that if \textit{One Frame} gets automatically
94 checked, the next time you render it will still be checked and you
95 will have to select a different one if desired. That is why you
96 should always check the settings.
99 \begin{figure}[htpb] \centering
100 \includegraphics[width=0.7\linewidth]{render02.png}
101 \caption{Render menu displaying a PNG \textit{one frame} option}
106 \item[Beep on done:] as a convenience when a render is complete,
107 check this box. It gives you the chance to work on something else
108 while waiting and still be immediately notified when the render is
110 \item[Render Profile:] \index{rendering!profile} another convenience feature to take advantage
111 of if you use specific render formats frequently, is to save that
112 profile for future usage without having to set it up again.
113 \item[Save Profile:] after setting up your render preference
114 formats, do not forget to type in a format name and then use the save profile
115 button to save it. The named/saved Profiles will be saved in your
116 \$HOME/.bcast5/Cinelerra\_rc file where it can be carefully modified.
117 \item[Delete Profile:] if you want to delete a saved profile,
118 highlight the one you no longer want and delete.
119 \item[Insertion strategy:] \index{insertion strategy} select an insertion mode from the
120 available choices as seen when you click on the down arrow on the
121 right hand side of the option. The insertion modes are the same as
122 with loading files. In the case if you select “insert nothing” the
123 file will be written out to disk without changing the current
124 project. For other insertion strategies be sure to prepare the
125 timeline to have the output inserted at the right position before
126 the rendering operation is finished.
128 Even if you only have audio or only have video rendered, a paste
129 insertion strategy will behave like a normal paste operation,
130 erasing any selected region of the timeline and pasting just the
131 data that was rendered. If you render only audio and have some
132 video tracks armed, the video tracks will get truncated while the
133 audio output is pasted into the audio tracks.
137 \subsection{Extra “cin\_” Options for Render with FFmpeg}%
138 \label{sub:extra_cin_option_ffmpeg}
139 \index{rendering!ffmpeg options}
141 There are several special parameters that can be used in the ffmpeg
142 options file to pass values to the codecs that are not normally
143 available. They're called Global Options. These are explained
146 \paragraph{cin\_pix\_fmt} The Render menus allows you to choose the
147 codec input pixel format (figure~\ref{fig:yuv420}). The Pixels
148 selection provides the available pixel format options for the chosen
149 codec type; valid choices vary for the different file types. This
150 list represents the formats that the codec advertises. It is not
151 always complete, and it may include options that are not legal with
152 all parameter configurations.
154 \begin{figure}[htpb] \centering
155 \includegraphics[width=1.0\linewidth]{yuv420.png}
156 \caption{Render \& Video Preset menus displaying Pixel choices}
161 \item The \textit{Bitrate}, \textit{Quality}, and \textit{Pixels}
162 fields are only updated when the Video Options are reloaded. This
163 occurs when you either change the ffmpeg file format, or video
164 presets compression fields.
165 \item If the video options preset has \textit{cin\_pix\_fmt}
166 defined, its value will be loaded as the default. If you override
167 the default, the value you specify will be used.
168 \item If the video options preset does not have
169 \textit{cin\_pix\_fmt}, the default pixel format will be computed by
170 ffmpeg (\textit{avcodec\_find\_best\_pix\_fmt\_of\_list}), using the
171 session format as the source choice. The \textit{best} is usually
172 the format which is most similar in color and depth.
173 \item If no choices are available, yuv420p for video will be used.
174 \item You can also specify ffmpeg pixel formats which are not in the
175 list. The list is provided by ffmpeg as input selection, but is
176 more like suggestions than fact. For example, the raw formats can
177 take almost any format, but the rawvideo codec actually specifies no
178 legal formats. Note that if you want a very specific Bitrate you must
179 make sure there is not conflicting parameter values set such as Quality
183 \noindent Some option files provide \textit{cin\_pix\_fmt} to
184 suggest a choice for good quality output or to prevent parameter
185 errors when the other provided parameters conflict with the
186 \textit{best} pixel format. This is the case in
187 \texttt{faststart\_h264.mp4} where the \textit{profile=high}
188 parameter dictates pixel format must be \texttt{yuv420p}.
190 \paragraph{cin\_bitrate} If you specify the bitrate, you can not
191 specify the quality or CRF.\\ Example: \textit{cin\_bitrate=2000000}
193 \paragraph{cin\_quality} If you specify the quality, you can not
194 specify the bitrate.\\ Example: \textit{cin\_quality=7}
196 \paragraph{cin\_stats\_filename} This parameter is useful for 2 pass
197 operations.\\ Example: \texttt{cin\_stats\_filename
198 /tmp/cin\_video\_vp9\_webm}
200 \paragraph{cin\_sample\_fmt} For audio the preset sample format
201 default is computed in a similar way as stated above for video or
202 can be set with the \textit{cin\_sample\_fmt} parameter
203 (figure~\ref{fig:audio}). If no choices are provided, s16 will be
204 used.\\ Example: \textit{cin\_sample\_fmt=s16}
206 \begin{figure}[htpb] \centering
207 \includegraphics[width=0.7\linewidth]{audio.png}
208 \caption{Render menu showing where Samples is}
212 \paragraph{Private Options} (muxers). In the window of the
213 \textit{wrench} in addition to the \textit{View} button, which
214 allows more global options and changes to the formats, there is an
215 additional \textit{Format} button that allows you to modify the
216 Private Options, i.e.\ relating to specific muxing formats. More
217 information on all these options can be found at
218 \href{https://ffmpeg.org/ffmpeg-all.html#Format-Options}{ffmpeg.org}
219 sections 19 and 21. See also \nameref{sub:modifying_ffmpeg_cinelerra}.
221 Render presets in \CGG{} should work Out Of the Box. You can still configure the \textit{Global Options} and \textit{Private Options} manually. Finding the combination of parameters that best suits your needs, or simply finding working (\textit{legal}) combinations, requires studying each codec in depth. You can start by looking in Wikipedia until you get to download and study the \textit{white papers} of the codecs of interest. In any case, you must then start a long experimental phase, trying presets with different configurations or creating new ones, until you get satisfactory results. If you create new presets it is a good idea to make them known on the mailing list ({\small \url{https://lists.cinelerra-gg.org/mailman/listinfo/cin}}) or on the MantisBT Bug Tracker ({\small \url{https://www.cinelerra-gg.org/bugtracker/my_view_page.php}}) so that they can be integrated into subsequent versions of \CGG{}. For an introduction see \nameref{sec:overview_formats}.
223 \section{Some Specific Rendering}%
224 \label{sec:some_specific_rendering}
226 \noindent The next few pages relate to rendering for specific common
229 \subsection{FFmpeg Common H.264 Rendering}%
230 \label{sub:ffmpeg_h264_rendering}
232 Because H.264 is so widely used, the method in \CGG{} Infinity is
233 outlined below. These setup steps make it easy to just get started.
236 \item File $\rightarrow$ Render
237 \item File Format $\rightarrow$ FFMPEG + mp4
238 \item Video Wrench $\rightarrow$ Preset $\rightarrow$ h264.mp4 +
239 bitrate: 6000000 (or whatever) + OK
240 \item Audio Wrench $\rightarrow$ Preset $\rightarrow$ h265.mp4 +
241 bitrate: 224000 (or whatever) + OK
242 \item Set your target path in: Render $\rightarrow$ Select a file to
244 \item Set your timeline in: Render $\rightarrow$ Render range +
246 \item Set your insertion strategy: Replace project (or whatever)
247 \item Press OK to start rendering.
250 \subsection{Lossless Rendering}%
251 \label{sub:loseeless_rendering}
252 \index{rendering!lossless}
254 Lossless means that in the compression of a file, all of the
255 original data, every single bit, can be recovered when the file is
256 uncompressed. This is different than \textit{lossy compression}
257 where some data is permanently deleted so that when uncompressed,
258 all of the original data can not be exactly recovered. Lossy is
259 generally used for video and sound, where a certain amount of
260 information loss will not be detected by most users or the playback
261 hardware does not reproduce it anyway -- it is a trade-off between
262 file size and image/sound quality. The files created will be more
263 than 10 times larger than usual. Most players will not be able to
264 decode lossless as the bitrate will overwhelm the device.
266 For x264 lossless compression to work, the only color model allowed
267 here is yuv420p. Any other specification will be converted to
268 yuv420p and the data will be modified. Also, keep in mind that the
269 YUV color model has to be converted to RGB, which also modifies the
272 To use x264 lossless rendering -- choose File format of ffmpeg, m2ts
273 in the Render window. Click on the Video wrench, which brings up
274 the Video Preset window and scroll down in the Compression filebox
275 and choose \texttt{lossless.m2ts}. \textit{Preset=medium} is the
276 default, but can be varied from \textit{ultrafast} (least amount of
277 compression, but biggest file size) to \textit{veryslow} (most
278 amount of compression, but still HUGE) in the parameter box where
279 you see $qp=0$. This option is also available for bluray creation.
281 \subsection{Two-pass Encoding with FFmpeg}%
282 \label{sub:two_pass_encoding_ffmpeg}
283 \index{rendering!ffmpeg two-pass encoding}
285 In \CGG{} for two-pass, you need to run ffmpeg twice, with the same
286 settings, except for designating the options of pass~1 for the first
287 pass and then pass~2. In pass~1, a logfile that ffmpeg needs for
288 the second pass is created. In pass~1 the audio codec should be
289 specified that will be used in pass~2. For more information on
291 \href{https://trac.ffmpeg.org/wiki/Encode/H.264}{ffmpeg.org}.
292 Different libraries may have different requirements and you will
293 probably have to determine this by looking online at ffmpeg or
294 looking directly at that code.
296 This 2 line ffmpeg 2-pass operation can be functionally duplicated
297 in \CGG{} in the steps below them:
299 \begin{lstlisting}[style=sh]
300 ffmpeg -y -i $INPUT \
301 -c:v libx264 -b:v 2600k -pass 1 \
302 -c:a aac -b:a 128k -f mp4 /dev/null && \
304 -c:v libx264 -b:v 2600k -pass 2 \
305 -c:a aac -b:a 128k $OUTPUT.mp4
309 \item After you have completed your editing, do a Save Session with
310 \texttt{File $\rightarrow$ Save as}\dots Before starting, be sure
311 your session is ready for batch render. That is, positioned at the
312 beginning and nothing selected.
313 \item Bring up \texttt{File $\rightarrow$ Batch Render}\dots where
314 you will do the setup.
315 \item Click on the \textit{Delete} box to remove old jobs
316 highlighted in the bottom listbox.
318 \item For the \textit{File Format} choose ffmpeg and mp4 for the
320 \item Set \textit{Output path} to the path and filename for the
322 \item Click on \textit{Use Current EDL} to use the designated EDL
324 \item Click on \textit{New} and you will see a new highlighted job
325 show up in the listbox at the bottom.
326 \item Use the Audio wrench to set bitrate to $128000$ ($128k$ as
327 in ffmpeg example above).
328 \item Click checkmark OK\@. Open the video tools with the video
330 \item Set the Video Compression to \textit{h264.mp4} (as seen in
332 \item Set the bitrate to $2600000$ ($2600k$ as in ffmpeg example
334 \item Add the following 2 lines after the first line:
335 \begin{lstlisting}[style=sh]
337 passlogfile /tmp/"{temporary log file name}.log"
338 \end{lstlisting} Click checkmark OK.
340 \item Click on \textit{New} to create the second pass job. You will
341 see this second job in the listbox below. Use the Video wrench and
342 change pass1 to pass2 as follows.
343 \begin{lstlisting}[style=sh]
346 \item Click checkmark OK.
347 \item Click on the \textit{Start} box and watch it go!
348 \item You can now check the output file for results. At the time
349 this was documented, \textit{rc=2pass} will be in the output.
352 If you need to re-render this, the Batch Render will still be set up
353 but you have to click on the \textit{Enabled} column in the listbox
354 to re-enable the jobs to run which puts an X there. Click Start
355 again. You can reuse batch job using the \textit{save jobs} and
356 \textit{load jobs} buttons in the batch render dialog.
358 \paragraph{Render shortcuts for webm, h264, h265} are available by
359 using the option files that are already set up for this purpose.
360 Use the render menu as usual, with ffmpeg/mp4, choose h264 or h265
361 \textit{pass1of2\_h26x} for the video and
362 \textit{passes1and\-2\_h26x} for the audio; with ffmpeg/webm, choose
363 \textit{pass1of2\_vp9}. When that is finished, you will have to use
364 the render menu again and this time for video, choose
365 \textit{pass2of2\_h26x} or \textit{pass2of2\_vp9}. The logfile is
366 hard coded in the options file so will write over any currently
367 existing logfile if you do not change it before you start the
370 \paragraph{Requirements for some other libraries} (used instead
371 of \textit{flags +pass1} \& \textit{passlogfile}):
373 \item[x265:] add this line:
374 \begin{lstlisting}[style=sh]
375 x265-params=pass=1:stats=/tmp/{temporary-log-file-name}.log
376 \end{lstlisting} at the time this document was written, you should
377 see in the output: \textit{stats-read=2}
378 \item[libvpx-vp9, xvid, and huffyuv:]~
379 \begin{lstlisting}[style=sh]
380 cin_stats_filename /tmp/{temporary-log-file-name}.log
381 flags +pass1 (or flags +pass2 for the second pass)
385 \textit{NOTE:} for vp9, the best Pixels is \textit{gbrp}
387 \subsection{Use case: High Efficiency Video Coding (HEVC)}%
388 \label{sub:use_case_hevc}
390 An example of video profile based on CRF, a quality-controlled
391 variable bitrate, instead of fixed quality scale (ABR). HEVC
392 (H.265) was developed as a successor to AVC (H.264) to more
393 efficiently compress the future large amounts of data from 2/4/8k
394 videos. In comparison to AVC, an average saving of around 30
395 percent can be assumed for the same quality. Because HEVC is not
396 bound to any size format, it is suitable for virtually any image
399 The following example is HD and FullHD oriented and produces a
400 picture quality similar to the Blu-ray with some limitations. As
401 container Matroska (\texttt{.mkv}) is used, but also mp4 and others
404 \begin{lstlisting}[style=sh]
407 # CRF 16 creates a balanced compromise
408 # between quality and file size.
411 # Preset changes encoding speed and generally
412 # degrades the overall result. Medium (default)
416 # Additional parameters that are passed on to the codec.
417 # me=star improves the search for very fast
418 # movements, but slows down the encoding.
421 # Keyint does FFmpeg automatically, otherwise
422 # the setting must match the frame rate.
425 # Profile does FFmpeg automatically.
428 # Source sRBG and retention of color space.
429 # 720/1080=bt709 if no profile set. Useful
430 # for formats smaller than 720 if no lossy
431 # conversion is desired.
434 color_primaries=bt709
436 # Output in 10 bit, prevents 8-bit step formation
440 \noindent \textit{NOTE:}
442 A CRF of 16 delivers satisfactory results in most cases. However, if
443 the video material is really \emph{grainy}, a CRF~16 can lead to
444 unwanted large files. In this case, a trial export of perhaps one
445 minute should be performed. The resulting bit rate can be used to
446 correct the CRF to 17,\,18,\,19\ldots -- remember, a CRF of $0$ (zero)
447 means lossless, the higher the number the stronger the lossy
448 compression. The approximate calculation of the final file size can
449 be extrapolated from the sample export.
451 The color space information must be used explicitly so that it can
452 be included in the video. \CGG{} or FFmpeg does not write it by
453 itself. Without this information the players (e.\,g.\
454 \href{https://mpv.io/}{mpv}) stick to the dimensions of the video
455 and take the assumed color model from a table. With videos in the
456 dimensions from 720 to 1080 this is bt709. For smaller dimensions,
457 e.\,g.\ DVD, bt601 is assumed and for 4k and above it is
458 bt2020. Normally this is not a problem, but if you want to export a
459 FullHD without color loss to a smaller size like 576 for example,
460 you have to inform the encoder as well as the decoder of the
461 player. This also applies if the videos are to be loaded on video
462 platforms, where they are then converted into videos of different
463 sizes. It is a security measure to prevent false colors, such as the
464 color profiles in digital photos and the copies made from them.
466 The HEVC tuning has not been considered here, because it is is
467 rarely used and requires background knowledge.
471 \item \href{http://x265.readthedocs.org/en/default/}{x265
473 \item \href{http://x265.readthedocs.org/en/latest/cli.html}{x265
474 Command Line Options}
475 \item \href{http://x265.readthedocs.org/en/latest/presets.html}{x265
480 \subsection{YouTube with \CGG{}}%
481 \label{sub:youtube_with_cinelerra}
482 \index{rendering!youtube preset}
484 To create a youtube or dailymotion video, you can easily follow the steps below. You will have to learn a lot more about \CGG{} to take full advantage of its capabilities and make some really special videos, but this is just to get a start and to see the possibilities.
487 \item Start \CGG{}; usually you can do this by clicking on \CGG{} icon or key in \texttt{{cin\_path}/bin/cin}.
488 \item In the Program window on the lower left side of your screen, left mouse click the \textit{File} pulldown.
489 \item You will see \textit{Load files} as the second choice so left mouse click this and find your video file to
490 load, highlight it, and check the green checkmark in the lower left hand corner to get it loaded.
491 \item Edit your video in the Program window using the basic commands of:
493 \item play and then stop using the space bar
494 \item move the mouse and then left click to move the insertion (location) pointer
495 \item cut a section out by holding down the left mouse and drag, then key in “x” to cut or “c” to copy
496 \item paste a copy or cut section by moving the insertion pointer, then key in “v”
498 \item Add a title by highlighting the \textit{Video Effects} in the right hand side Resources window; then
499 highlighting the \textit{Title} icon and dragging it to the Program window video track and dropping.
500 \item Click on the middle icon button (looks like a magnifying glass) on the brown colored Title bar to
501 bring up the Title window bottom text box and key in a title.
502 \item Use the \textit{File} pulldown to select \textit{Render} to create the desired video. In the \textit{Render} window just next to the empty box to the right of the \textit{ffmpeg} file format, click on the down arrow shown there
503 to see the choices and pick \textit{youtube}. Then move back up to key in the path and filename to render
504 to. It will pick all of the defaults automatically for you so then just click on the green checkmark to
505 have it start. There is a progress bar in the main window, very bottom of the right hand side.
506 \item Key in “q” in the main window to get out of \CGG{} and yes or no to save your edit session.
509 Youtube will allow the upload of the resulting rendered file as named. However, Dailymotion requires that the file be named with an acceptable extension so you must rename the output file to have the extension of .webm instead of .youtube
511 There are currently 6 specific variations within the ffmpeg (file format) / youtube (file type) for different video options. You see these when you click on the wrench to the right of the word Video and then the Compression down arrow in the Video Preset window. The first 3 are based on Webm/Vp9\protect\footnote{credit by Frederic Roenitz} and contain basic comments of usage and where to find more information.
513 The first 3 below, plus any of the VP9 files under the file type of \textit{webm} are the recommended options to use because they are freely usable in any circumstance.
516 \begin{tabular}{l p{8cm}}
517 sd.youtube & Standard Definition use with default audio/Opus stereo.youtube \\
518 hd.youtube & High Definition “ “ \\
519 uhd.youtube & Ultra High Definition “ “ \\
523 For more details and options on VP9, see: {\small\url{https://developers.google.com/media/vp9}}
525 Alternatives based on h264 and for non-commercial use are listed below. For Dailymotion, these must be renamed to have a different extension of .mp4 instead of .youtube before uploading.
528 \begin{tabular}{l p{8cm}}
529 sd\_h264.youtube & Standard Definition – must change to audio stereo\_with\_h264.youtube \\
530 hd\_h264.youtube & High Definition - “ “ \\
531 uhd\_u264.youtube & Ultra High Definition - “ “ \\
535 These same steps have been verified to work for creating Dailymotion videos -- however, the created files must be renamed before uploading to change the youtube extension to webm instead for Dailymotion.
537 \subsection{VP9 parameters}%
538 \label{sub:vp9_parameters}
539 \index{rendering!VP9 parameters}
541 \textsc{VP9}\protect\footnote{credit Frederic Roenitz} is a video codec licensed under the BSD license and is
542 considered open source,
543 % Sisvel Announces AV1 Patent Pool, March 10, 2020
544 % https://www.streamingmedia.com/Articles/ReadArticle.aspx?ArticleID=139636
545 % Webm / VP9 is a media file format which is free to use under the
546 % BSD license and is open-source; thus there are no licensing
547 % issues to be concerned about.
548 the \textsc{Webm} container is based on \textsc{Matroska} for video
549 and \textsc{Opus} for audio. There are some common \textsc{VP9} rendering
550 options files that support creation of video for YouTube,
551 Dailymotion, and other online video services.
553 YouTube easy startup steps are documented above.
555 Below is one of the \textsc{VP9} rendering options file with documentation for specifics:
557 \textbf{webm libvpx-vp9}
559 from {\small \url{https://developers.google.com/media/vp9/settings/vod/}}
561 1280x720 (24, 25 or 30 frames per second)
565 \textsc{VP9} supports several different bitrate modes:
569 \begin{tabular}{p{6cm} p{10cm}}
570 Constant Quantizer (Q) & Allows you to specify a fixed quantizer value; bitrate will vary \\
571 Constrained Quality (CQ) & Allows you to set a maximum quality level. Quality may vary within bitrate parameters\\
572 Variable Bitrate (VBR) & Balances quality and bitrate over time within constraints on bitrate\\
573 Constant Bitrate (CBR) & Attempts to keep the bitrate fairly constant while quality varies\\
576 CQ mode is recommended for file-based video (as opposed to streaming). The following FFMpeg command-line parameters are used for CQ mode:
581 \begin{tabular}{{p{4cm} p{10cm}}}
582 -b:v <arg> & Sets target bitrate (e.g. 500k)\\
583 -minrate <arg> & Sets minimum bitrate.\\
584 -maxrate <arg> & Sets maximum bitrate.\\
585 -crf <arg> & sets maximum quality level. Valid values are 0-63, lower numbers are higher quality.\\
589 \textit{Note 1}: Bitrate is specified in kbps, or kilobits per second. In video compression a kilobit is generally assumed to be 1000 bits (not 1024).
591 \textit{Note 2:} Other codecs in FFMpeg accept the \textit{-crf} parameter but may interpret the value differently. If you are using \textit{-crf} with other codecs you will likely use different values for VP9.
593 \texttt{bitrate=1024k}\\
594 \texttt{minrate=512k}\\
595 \texttt{maxrate=1485k}\\
598 \textit{Tiling} splits the video into rectangular regions, which allows multi-threading for encoding and decoding. The number of tiles is always a power of two. 0=1 tile; 1=2; 2=4; 3=8; 4=16; 5=32\\
599 \texttt{tile-columns=2}
601 (modified from {\small \url{https://trac.ffmpeg.org/wiki/EncodingForStreamingSites}})
603 To use a 2 second \textit{GOP} (Group of Pictures), simply multiply your output frame rate $\times$ 2. For example, if your input is \textit{-framerate 30}, then use \textit{-g 60}.\\
606 number of \textit{threads} to use during encoding\\
609 \textit{Quality} may be set to good, best, or realtime\\
610 \texttt{quality=good}
612 \textit{Speed}: this parameter has different meanings depending upon whether quality is set to good or realtime. Speed settings 0-4 apply for VoD in good and best, with 0 being the highest quality and 4 being the lowest. Realtime valid values are 5-8; lower numbers mean higher quality\\
615 \subsection{Piping Video to a Command Line}%
616 \label{sub:piping_video_command_line}
617 \index{rendering!command line}
619 You can pipe a video to any command line on the computer, such as
620 ffmpeg. This can be especially useful with raw video files. Next
624 \item on a terminal window create a named pipe file, for example:
625 \begin{lstlisting}[style=sh]
626 mknod /tmp/piper.yuv p
627 \end{lstlisting} load your video and do your editing
628 \item set up your Render (\texttt{Shift-R}), you can choose a raw
629 format such as \textit{yuv} or \textit{rgb}
630 \item for the filename \textit{Select a file to render to}, use the
631 named pipe as created in step 1 (\texttt{/tmp/piper.yuv})
632 \item for \textit{Insertion Strategy}, you will want to make sure to
633 select \textit{insert nothing}
634 \item click for OK on the green checkmark.(the \CGG{} gui will look
635 like it is hanging while waiting for a command line to use the
637 \item on the terminal window, keyin your command, for example:
638 \begin{lstlisting}[style=sh]
639 /mnt0/build5/cinelerra-5.1/thirdparty/ffmpeg-3.4.1/ffmpeg -f \
640 rawvideo -pixel_format yuv420p -video_size 1280x720 \
641 -framerate 30000/1001 -i /tmp/piper.yuv /tmp/pys.mov
645 A slightly different option can be used instead that may be more
646 familiar to some. In the render menu after choosing the File Format
647 of \textit{ffmpeg}, use the pulldown to choose \textit{y4m} as the
648 file type. This choice results in putting a header on the rendered
649 output with some pertinent information that can be used for ffmpeg
650 processing thus alleviating the requirement for
651 \textit{pixel\_format}, \textit{video\_size}, and \textit{framerate}
652 on the ffmpeg command line. In this case the format is
653 \textit{yuv4mpegpipe} instead of \textit{rawvideo}. An example
654 command line would look as follows (assuming the created pipe is
655 called \texttt{piper.y4m}):
656 \begin{lstlisting}[style=sh]
657 ffmpeg -f yuv4mpegpipe -i /tmp/piper.y4m -vcodec libx264 /tmp/test.mp4
660 \subsection{Faststart Option for MOV type files}%
661 \label{sub:faststart_option_mov0}
663 If you have mov video and want to be able to start playing without
664 having to first load the entire video, \textit{-movflags=+faststart}
665 is needed for ffmpeg to put the meta-data, known as the \textit{moov
666 atom}, at the beginning of the file. Otherwise, ffmpeg puts this
667 atom at the end of the video file which means you have to wait to
668 play until the whole video is loaded. Or worse yet, if the file
669 becomes damaged in the middle and you can not get to the end, you
670 won’t be able to play anything.
672 Now you can have the \textit{moov atom} put on the front of the file
673 (automatically via a second pass). To do this, when rendering using
674 ffmpeg \& either the mp4 or qt format/container, click on the
675 video/audio wrenches and choose \textit{faststart\_h264}. With the
676 \textit{qt} format, settings will just be the default whereas the
677 \textit{mp4} format uses the highest quality and lowest file size as
678 possible, but you can easily modify these options in the associated
679 Video Preset textbox.
681 \section{About Image Sequences}%
682 \label{sec:about_image_sequences}
683 \index{image sequence}
685 \CGG{} supports image sequences with both decoding and encoding.
687 \CGG{} by default uses ffmpeg as encoding/decoding engine but we can disable it to have the specific internal engine available. See \nameref{sec:ffmpeg_early_probe_explanation} on how to switch between engines. With the internal engine we can create and load sequences of OpenEXR; PNG; TIFF; TGA; GIF; PPM and JPEG. There is also support for DPX sequences, but only in read and without rendering presets. With ffmpeg we can create and load DPX sequences or create a custom preset for any kind of image. Using these formats results in great timeline efficiency and high video quality at the cost of taking up a lot of space because they are uncompressed (or with lossless compression).
688 By rendering, you will get as many still images as there are frames in the project, plus a \textit{file-list} (or \textit{TOC}) that indexes the images. A good practice is to create a folder to contain the images (for example \texttt{/tmp/img\_seq/}) and then open the rendering window in \CGG{} and set a serial and increasing number as the name (for example: \texttt{/tmp/img\_seq/image \%05d.png}). \textit{image} is a generic name chosen at will; $\%$ creates a progressive sequence of distinct images; $05d$ indicates how many digits the image number will be, in this case 5 digits to go from $00000$ to $99999$.
689 Once we have our folder of images, if we want to import it in a project just load the file-list, which includes the link to all the files of the sequence.
690 To learn more about using and creating a preset with ffmpeg of an image sequence, see \nameref{sec:ffmpeg_image2_streams} and/or \nameref{sec:image_sequence_creation}.
692 \section{Data storage formulas}%
693 \label{sec:data_storage_formulas}
696 If we are dealing with large projects and poorly compressed formats, we will get large files that are difficult to manage and take up a lot of space on the HDD. We present some simple formulas to be able to calculate the space that will be occupied and the data rates we have to deal with:
701 \[ \dfrac{Width \times Height [pixels] \times BitDepth [bits/pixel] \times Color}{8 [bit/Byte]} \]
702 \[= ... [MB/frame] \]
705 \[ Frame size [MB/frame] \times frames [frame] = ... [MB] \]
708 \[ Frame size [MB/frame] \times fps [frame/sec] = ... [MB/sec] \]
709 \item[Data in 1 Hour]
711 \[ \dfrac{Data Rate [MB/sec] \times 3600 [sec]}{1024MB/GB} = ... [GB] \]
714 \section{Batch Rendering}%
715 \label{sec:batch_rendering}
716 \index{batch rendering}
718 Batch Rendering as implemented in \CGG{} is considered to be more of
719 an advanced feature and careful usage is advised. It automates the
720 rendering of audio/video files in that
721 you can establish a set of job parameters, save them, and use them
722 repeatedly (figure~\ref{fig:batch01}). It also allows for \CGG{} to
723 be run by external programs, with no need for the user to manually
724 interact with the user interface.
726 \begin{figure}[htpb] \centering
727 \includegraphics[width=1.0\linewidth]{batch01.png}
728 \caption{Example of the Batch Render menu}
732 If you want to render many projects \index{project} to media files without having to
733 constantly set up the render dialog for each one, batch rendering is
734 a more efficient method of rendering. To use this feature you need to
735 understand certain concepts.
738 \item You must define a list of Batches (\textit{Job} \index{job}) before starting the rendering. This is created using the \textit{New} button and displayed in \textit{Batches to Render} dialog.
739 \item Each batch consists of a source project already created in \CGG{}, e.g. \texttt{aaa.xml}, to which we assign the rendering parameters.
741 \item to associate \texttt{aaa.xml} to the batch we use the \textit{EDL Path} input field.
742 \item we decide a name and path for the output file.
743 \item let's set the \textit{File Format} of the output file.
744 \item We configure the file with the Audio/Video \textit{wrench}.
745 \item we decide whether to create different files for each \textit{label} and whether to use a \textit{Render farm}.
747 \item Created the first batch, we will see it appear in the dialog \textit{Batches to Render}.
748 \item Using the \textit{New} button again we create a second batch for another source project (\texttt{bbb.xml}) and configure it at will.
749 \item We continue with the source projects \texttt{ccc.xml}, \texttt{ddd.xml}, etc. until we run out of projects that we want to render in batch.
750 \item Note that each batch has its own name, path and rendering parameters.
751 \item Now we have our \textit{Job}, a list of batches. We can still configure it or modify it if we want to change something. In addition we can delete a batch from the list or we can disable it in the \textit{Enabled} field so that it is not taken into account during rendering, but without deleting it.
752 \item Finally we start batch rendering with the \textit{Start} button.
755 Let's see in detail how to set the Batch Rendering.
757 The first thing to do when preparing to do batch rendering is to
758 create one or more \CGG{} projects to be rendered and save them as a
759 normal project, such as \texttt{aaa.xml}. The batch renderer
760 requires a separate project file for every batch to be rendered.
761 You can use the same \CGG{} project file if you are rendering to
762 different output files, as in an example where you might be creating
763 the same output video in different file formats.
765 You do not have to render an entire projects. We can limit ourselves to an \textit{active region} \index{active region} that we can set through a selection in Cut and Paste mode, with labels or In/Out Points. Or the rendering will start from the Insert Point position until the end of the project. Remember: if we want to render the entire project (and not just one active region) it is important to bring the Insertion Point to the beginning of the timeline. This is the only way we are sure to include the whole project.
767 With all the \CGG{} xml project files prepared with active regions,
768 go to \texttt{File $\rightarrow$ Batch Render}. This brings up the
769 batch render dialog. The interface for batch rendering is more
770 complex than for single file rendering. A list of batches must be
771 defined before starting a batch rendering operation. The table of
772 batches appears on the bottom of the batch render dialog and is
773 called \textit{Batches to render}. Above this are the configuration
774 parameters for a single batch; a batch is simply a pairing of a
775 project file with a choice of output file and render settings.
777 It may be advisable to start with a \textit{Delete} so you don't have any problems. Set the \textit{Output path}, \textit{File format}, \textit{Audio},
778 \textit{Video}, and \textit{Create new file at each label}
779 parameters as if you were rendering a single file. These parameters
780 apply to only one batch. In addition to the standard rendering
781 parameters, you must select the \textit{EDL Path} to be the project
782 file (such as \texttt{aaa.xml}) that will be used in the batch
783 job. In this case, \textit{EDL Path} is not related in anyway with
784 the EDL files as created by \texttt{File/Export EDL}. In batch
785 render mode the program will not overwrite an existing output file
786 and will simply fail, so make sure that no files with the same name
787 as the output files exist before starting.
789 If the batches to render list is empty or nothing is highlighted,
790 click \textit{New} to create a new batch. The new batch will contain
791 all the parameters you just set. Repeatedly press the \textit{New}
792 button to create more batches with the same parameters. When you
793 highlight any batch, you can edit the configuration on the top of
794 the batch render window. The highlighted batch is always
795 synchronized to the information displayed. You can easily change
796 the order in which the batch jobs are rendered, by clicking and
797 dragging a batch to a different position. Hit \textit{Delete} to
798 permanently remove a highlighted batch. In the list box is a column
799 which enables or disables the batch with an \texttt{X} meaning the
800 batch job is enabled and will be run. This way batches can be
801 skipped without being deleted. Click on the \textit{Enabled} column
802 in the list box to enable or disable a batch.
804 The description of each of the columns in the batch list are as
808 \item[Enabled:] an X in this column means the batch job will be run.
809 \item[Labeled:] an \texttt{X} in this column goes hand in hand with
810 create new file at each label.
811 \item[Farmed:] to use or not the render farm.
812 \item[Output:] path and filename for the generated output.
813 \item[EDL:] the path and filename of the source EDL for the batch
815 \item[Elapsed:] the amount of time taken to render the batch if
816 finished. If field is empty, it did not run.
819 The \texttt{File $\rightarrow$ Batch Render} pulldown brings up the
820 Batch Render window to be used for batch rendering as well as DVD/BD
821 creation. There are some additional buttons that can save time and
822 mistakes. These are described next.
825 \item[Save Jobs] when you have set up the batch jobs the way you
826 want and you think you may have to run them more than once, it is
827 beneficial to save the jobs for later use so you easily run them
828 again. It is recommended to use a filename with .rc as the extension
829 so that it is obvious that it is a list of batch jobs to be run.
830 \item[Load Jobs] reload a previous set of saved jobs. This can come
831 in handy if you did not have the time to render them when you
832 originally set them up, if you need to rerun, or if you got
836 To start rendering from the first enabled batch,
837 hit \textit{Start}. Once rendering, the main window shows the
838 progress of the batch. After each batch finishes, the elapsed column
839 in the batch list is updated and the next batch is rendered until
840 all the enabled batches are finished. The currently rendering batch
841 is always highlighted red. To stop rendering before the batches are
842 finished without closing the batch render dialog, hit \textit{Stop}.
843 To stop rendering before the batches are finished and close the
844 batch render dialog, hit \textit{Close}. Or you can exit the batch
845 render dialog whether or not anything is being rendered, by hitting
848 You can automate \CGG{} batch renders from other programs. In the
849 batch render dialog, once you have created your list of batch render
850 jobs, you can click the button \textit{Save Jobs} and choose a file
851 to save your batch render list to. It is recommended that you use
852 a filename with the extension of .rc in order to make it obvious that
853 this is a list of batch jobs to render. Once you have created this file,
854 you can start up a batch render without needing to interact with the
855 \CGG{} user interface. From a shell prompt, from a script, or other
858 \begin{lstlisting}[style=sh]
859 {path_to_cinelerra}/cin -r batchjob.rc
860 \end{lstlisting} substituting your actual filename for
861 \texttt{batchjob.rc}. \textbf{Warning} this file will be modified
862 so if you use any filename that is not a legitimate list of batch jobs to
863 render, that file will be overwritten and its previous contents destroyed.
864 When invoked with these parameters, \CGG{} will start up and run the
865 rendering jobs in the list contained in that file starting at the defined
866 \textit{active region}, without creating its usual windows. If you do not
867 specify a filename, the default will be \$HOME/.bcast5/batchrender.rc.
868 Possible messages you might see where you started up the job are as follows.
870 \item[The following files exist: - filename - Won't overwrite existing files] that batch job will not run in order to prevent writing over previous run.
871 \item["filename" No such file or directory] the specified batch job file does not exist.
872 \item["filename": Permission denied] the specified batch job file does not have write permission so can not be updated.
873 \item[Render::run: filename] the batch job with the name of filename will be processed.
874 \item[** rendered 0 frames in 0.000 secs, 0.000 fps] either you used a file that is not a list of batch jobs or the batch jobs within the file were not enabled.
877 \subsection{Advanced features}%
878 \label{sub:advanced_features}
879 \index{batch rendering!more options}
881 \textbf{Warning}: \textit{Save to EDL path} overwrites the current EDL thus destroying the original contents.
883 Although the operation of Batch Rendering in \CGG{} is similar to that of other NLEs, there is one big difference that we need to take into account. The render setup is not done on a project-by-project basis, which are then brought into the Batch window to be rendered automatically. The setup must be done in the Batch rendering window, where various projects are loaded and set up. In the case of similar projects, derived from a single EDL with some variation, this mode offers the possibility of altering the projects without having to open each individual project, make the changes, set up the rendering, save and import into the Batch window. The procedure is to select the batch we want to modify in the Batches to render window; operate on the currently open timeline (even if it does not correspond to the one we want to modify) making the desired changes and then press the \textit{Save to EDL path} button. Thus the chosen batch, while retaining its original name, will now contain the modified project. Since this possibility destroys the original EDL overwriting it with the modified one, you must be very careful. This procedure is convenient in case the batches are similar, i.e. they are variations of the same EDL, where we want to experiment with other effects, other output formats or when trying out various cuts of a DVD/BD before the final production. It might also be useful to use an \textit{active region} of the timeline, so as to speed up rendering times but still have an indicative result for comparison. Instead operating on different projects, we can do a \textit{save as...} of the project on the timeline to have a new EDL with a new name and then replace it with the batch selected in the joblist using the \textit{Use Current EDL} button. The new project (with its name) overwrites the original project.
885 The \textit{Save to EDL Path} and \textit{Use Current EDL} buttons
886 can be valuable tools for advanced usage or for developers doing
887 testing. Description of how you can expect them to work will help
888 to illustrate how to take advantage of their capabilities (figure~\ref{fig:batch-advanced}):
890 \begin{figure}[htpb] \centering
891 \includegraphics[width=0.7\linewidth]{batch-advanced.png}
892 \caption{New Buttons with Unsafe GUI in batchrender}
893 \label{fig:batch-advanced}
898 \item[Save to EDL Path] Warning: this function overwrites the contents of the original EDL with new data, keeping the name of the original. If we don't know exactly what we're doing we may lose the original project. If you have made a change to the EDL, use
899 this button to save the changes so that they will be used in the
900 render operation. Although you can get the same results by using
901 \texttt{File $\rightarrow$ Save\dots}, this capability was initially
902 added to assist developers in testing the batch jobs needed to
903 create dvd/bluray media as it keeps the work focused in a single
904 window and retains the original job name. An example --you have
905 everything all set up with a new job in the Batch Render window
906 using \texttt{generic.xml} for the EDL path and with a job name of
907 \texttt{original\_name.xml}. Then you realize that you forgot to
908 cut out a section in the media that is not wanted in the final
909 product. You can cut that out and then \textit{Save to EDL Path} so
910 your change will be in effect for the rendering. Without this
911 button, you would be using the EDL you started with and the cut
912 would be ignored. Alternatively, if the cut changes are saved via
913 \texttt{File $\rightarrow$ Save as}\dots with a filename of
914 \texttt{new.xml} and then you use \textit{Save to EDL Path}, the
915 current highlighted job displayed in the window as
916 \texttt{original\_name.xml} will be replaced with \texttt{new.xml}.
917 However, it is important to note that the result will be saved with
918 the name \texttt{original\_name} – that is, the new content from
919 \texttt{new.xml} but with the old name of
920 \texttt{original\_name.xml}. To have this functionality we have to enable the checkbox in \texttt{Settings $\rightarrow$ Preferences $\rightarrow$ Appearance} tab; section \textit{Dangerous:} and unchecked (default) \textit{Unsafe GUI in batchrender}.
921 \item[Use Current EDL] Warning: this function overwrites the contents of the original EDL with new project. If we don't know exactly what we're doing we may lose the original project. if you are working on media and still testing
922 out the results, you can take advantage of this click-box to quickly
923 get results. Basically, you change the media, save that change with
924 another name (in order to preserve the original name in case you
925 don't like the changes), and press \textit{Use Current EDL}. As an
926 example, a user creates a new job in the Batch Render window using
927 the current media, previously defined in generic.xml, with the EDL
928 path of \texttt{generic.xml}. The user then changes the media on
929 the timeline, saves the changes via \texttt{File $\rightarrow$ Save
930 as\dots} with a new name, such as \texttt{new\_name.xml}, and then
931 clicks on \textit{Use Current EDL}. In this case, the EDL path
932 listbox will be automatically updated to the \texttt{new\_name.xml}
933 and the current existing highlighted job will be replaced with the
934 \texttt{new\_name.xml} in the EDL column.
935 \item[Warn if Jobs/Session mismatched] Warning: It is better to keep this function unchecked because it is only needed in case of changes on the original EDL. By default it is hidden and is shown only if we enable the checkbox in \texttt{Settings $\rightarrow$ Preferences $\rightarrow$ Appearance} tab; section \textit{Dangerous:} and checked \textit{Unsafe GUI in batchrender}. After you set up your render
936 and press Start, the program checks to see if the current EDL
937 session matches your Batch Render job. If the EDL has been changed
938 since the batch job was created, it warns you so that you have the
939 opportunity to \textit{Save to EDL} path to record those changes.
940 Otherwise, you can dismiss that warning box, disable the warning
941 message by unchecking the box and use the original values. If you
942 never want to be warned about the mismatches, leave the box
943 unchecked (figure~\ref{fig:batch02}). It is advisable to keep it unchecked because it can cause problems.
946 \begin{figure}[htpb] \centering
947 \includegraphics[width=0.9\linewidth]{batch02.png}
948 \caption{Batch render with the 4 ghosted buttons on the right side
949 + the Warning message below}
953 A very clear tutorial on these features can be found \href{https://linuxvideoediting.blogspot.com/2021/01/save-edl-path-use-current-edl-in-cinelerra-gg.html}{here}\protect\footnote{credit Igor Vladimirsky}; in Russian but easily translatable with DeepL or similar.
955 \subsection{Command Line Rendering}%
956 \label{sub:command_line_rendering}
957 \index{rendering!command line}
959 The command line rendering method consists of a way to load the
960 current set of batch rendering jobs and process them without a
961 GUI\@. This is useful if you want to do rendering on the other side
962 of a low bandwidth network and you have access to a high powered
963 computer located elsewhere. Setting up all the parameters for this
964 operation is somewhat difficult. That is why the command line aborts
965 if any output files already exist.
967 To perform rendering from the command line, first run \CGG{} in
968 graphical mode. Go to \texttt{File $\rightarrow$ Batch Render}.
969 Create the batches you intend to render in the batch window and
970 close the window. This automatically saves the batches in a file
971 with the name of \$HOME/.bcast5/batchrender.rc. Set up the
972 desired render farm attributes in \texttt{Settings $\rightarrow$
973 Preferences} and quit out of \CGG{} if you want to use the Render
974 Farm capability. These settings are used the next time command line
975 rendering is used to process the current set of batch jobs without a
976 GUI\@. It is important to remember that the rendering will begin at
977 the defined \textit{active region} saved when the project was saved.
979 On the command line run:
981 \begin{lstlisting}[style=sh]
985 \section{Background Rendering}%
986 \label{sec:background_rendering}
987 \index{background rendering}
989 Background rendering causes temporary output to be rendered
990 constantly while the timeline is being modified. The temporary
991 output is displayed during playback whenever possible. This is
992 useful for transitions and previewing effects that are too slow to
993 display in real time. If a Render Farm \index{render farm} is enabled, the render farm
994 is used for background rendering. This gives you the potential for
995 real-time effects if enough network bandwidth and CPU nodes exist.
997 Background rendering is enabled in the \texttt{Performance} tab of
998 the \texttt{Preferences} window. It has one interactive function
999 \texttt{Settings $\rightarrow$ Toggle background rendering} \index{background rendering!toggle}. This
1000 sets the point where background rendering starts up to the position
1001 of the insertion point. If any video exists, a red bar appears in
1002 the time ruler showing what has been background rendered
1003 (figure~\ref{fig:back-ren02}). Because this creates a very large number
1004 of files, a Shell Command script is available to delete them if in the
1007 \begin{figure}[htpb] \centering
1008 \includegraphics[width=1.0\linewidth]{back-ren02.png}
1009 \caption{Settings Background Rendering}
1010 \label{fig:back-ren02}
1013 It is often useful to insert an effect or a transition and then
1014 select \texttt{Settings $\rightarrow$ Toggle background rendering}
1015 right before the effect to preview it in real time and full frame
1016 rates (figure~\ref{fig:back-ren}).
1018 \begin{figure}[htpb] \centering
1019 \includegraphics[width=1.0\linewidth]{back-ren.png}
1020 \caption{Timeline with the top red bar}
1021 \label{fig:back-ren}
1025 \item[Frames per background rendering job] This only works if a
1026 Render Farm is being used; otherwise, background rendering creates a
1027 single job for the entire timeline. The number of frames specified
1028 here is scaled to the relative CPU speed of rendering nodes and used
1029 in a single render farm job. The optimum number is 10 - 30 since
1030 network bandwidth is used to initialize each job.
1031 \item[Frames to preroll background] This is the number of frames to
1032 render ahead of each background rendering job. Background rendering
1033 is degraded when preroll is used since the jobs are small. When
1034 using background rendering, this number is ideally 0. Some effects
1035 may require 3 frames of preroll.
1036 \item[Output for background rendering] Background rendering
1037 generates a sequence of image files in a certain directory. This
1038 parameter determines the filename prefix of the image files. It
1039 should be accessible to every node in the render farm by the same
1040 path. Since hundreds of thousands of image files are usually
1041 created, ls commands will not work in the background rendering
1042 directory. The browse button for this option normally will not work
1043 either, but the configuration button for this option works. The
1044 default value will be /tmp/brender . Because using background
1045 rendering creates a voluminous number of brender numbered files,
1046 a Shell Command script is available to delete them if they are
1047 in the default /tmp/brender format.
1048 \item[File format] The file format for background rendering has to
1049 be a sequence of images. The format of the image sequences
1050 determines the quality and speed of playback. JPEG generally works
1051 well and is the default.
1053 Tip: If you have rendered your whole project with \textit{File format}
1054 set to JPEG and there are no missing numbers in the sequence, you can
1055 create a video from that sequence outside of \CGG{}.
1056 For example, if using the default output so that your files are named
1057 /tmp/brender000000, /tmp/brender000001, ... in a window, you would type:
1059 \begin{lstlisting}[style=sh]
1060 ffmpeg -f image2 -i /tmp/brender0%5d -c:v copy brender.mov
1062 which would create the video file brender.mov - be sure to delete
1063 existing brender files before creating a new sequence to ensure there
1064 are no missing numerical values in the sequence.
1066 \section{Render Farm Usage}%
1067 \label{sec:render_farm_usage}
1070 Render Farm uses background rendering, a feature of \CGG{} where the
1071 video is rendered in the background, to speed up rendering
1072 significantly. Because rendering is memory and cpu intensive, using
1073 multiple computers on a network via a render farm is a significant
1074 gain. With \CGG{} installed on all nodes, the master node and the clients communicate via a network port that you specify.
1075 The Master node is the one of the instance of \CGG{} that we normally start with its gui; the other nodes are the instances of \CGG{} that we decide to start in parallel from the terminal to create the Render farm (clients).
1076 \CGG{} can distribute the rendering tasks over the network to the
1077 other computers of the Render Farm; or among all threads of a multicore CPU. The render farm software tries
1078 to process all of the rendering in parallel so that several
1079 computers can be used to render the results. The \textit{Total jobs
1080 to create} in the setup or labels on the timeline are used to divide
1081 a render job into that specified number of tasks. Each background
1082 job is assigned a timeline segment to process and the jobs are sent
1083 to the various computer nodes depending upon the load balance. The
1084 jobs are processed by the nodes separately and written to individual
1085 files. You will have to put the files back together via a load with
1086 concatenation, or typically by using a command line tool from a
1089 \subsection{Basic Steps to Start a Render Farm}%
1090 \label{sub:basic_steps_start_render_farm}
1092 The following steps are just a guideline to start your render farm.
1093 It is assumed that you already have the master and client nodes
1094 communication, shared filesystem, permissions and usernames synched.
1095 Let's take the example of a network with 2 PCs: the master and the client. On the client we set 5 tasks; on the master we set 2 tasks.
1098 \item On the master computer, use \texttt{Settings} $\rightarrow$
1099 \texttt{Preferences} $\rightarrow$ \texttt{Performance} \texttt{tab}
1100 to set up a Render Farm:
1102 \item check the \textit{Use render farm} box;
1103 \item in the \textit{Hostname} box, keyin your hostname or ip
1104 address such as 192.168.1.12 or \textit{localhost};
1105 \item enter in a port number such as 401--405 (only a root user
1106 can use privileged ports) or $10650...$ for non-root and click on \textit{Add Nodes}. To find a range of free ports to use you can look at the file \texttt{/etc/services};
1107 \item you will see something like the following in the Nodes
1108 listbox to the right:\newline
1109 \begin{tabular}{lllc} On & Hostname & Port & Framerate
1111 X & 192.168.1.12 & 10650 & 0.0 \\
1112 X & 192.168.1.12 & 10651 & 0.0 \\
1113 X & 192.168.1.12 & 10652 & 0.0 \\
1114 X & 192.168.1.12 & 10653 & 0.0 \\
1115 X & 192.168.1.12 & 10654 & 0.0 \\
1116 X & localhost & 10655 & 0.0 \\
1117 X & localhost & 10656 & 0.0 \\
1119 \item set the Total number of jobs to create. This number only pertains to client nodes, so we do not need to consider the master node;
1120 \item click OK on the bottom of the Preferences window.
1122 \item For external network nodes, now we must join the nodes created to instances of \CGG{}. On the client computers ($192.168.1.12$), on the terminal, start 5 background \CGG{} tasks via:
1123 \begin{lstlisting}[style=sh]
1124 cd {path_to_cinelerra}
1125 cin -d 10650 cin -d 10651
1129 In practice, at each instance that we start, the cursor will be positioned in a new line ready to enter the next command, without exiting the task. If we have several PCs on the network, repeat these steps for each new client (with its own ip address).
1130 \item Similarly, on the terminal, we must join the local nodes (internal to the Master node) created to instances of \CGG{}. On the Master node (localhost), start the 2 background \CGG{} tasks via:
1131 \begin{lstlisting}[style=sh]
1132 cd {path_to_cinelerra}
1136 Similar to the previous point, the cursor positions itself in a new line ready to enter the next command, without exiting the task.
1137 \item When your video is ready, setup a render job via \texttt{File
1138 $\rightarrow$ Render} or \texttt{File $\rightarrow$ Batch Render}
1140 \item The results will be in the shared file \texttt{path/filename}
1141 that you selected in the render menu with the additional numbered
1142 job section on the end as $001, 002, 003, \dots 099$ (example,
1143 \texttt{video.webm001}).
1144 \item When finished, load your new files on new tracks via
1145 \texttt{File $\rightarrow$ Load} \textit{concatenate to existing
1146 tracks} or if you used ffmpeg, run \textit{RenderMux} from the Shell
1148 \item If you plan on doing more rendering, you can just leave the
1149 master/client jobs running to use again and avoid having to restart
1150 them. You can also close the terminal, but the jobs will remain active until you turn off the PC. Or you can kill them when you no longer are using them.
1153 \subsection{Render Farm Menu and Parameter Description}%
1154 \label{sub:render_farm_parameter_description}
1155 \index{render farm!parameters}
1157 Below we describe the Performance tab for configuring a render farm
1158 (figure~\ref{fig:farm}).
1160 \begin{figure}[htpb] \centering
1161 \includegraphics[width=1.0\linewidth]{farm.png}
1162 \caption{Settings: Preferences: Performance tab, menu
1163 to set up your Render Farm}
1168 \item[Project SMP cpus] although this field is not Render Farm
1169 specific, it is useful for \CGG{} to have the CPU count and for
1170 using multiple threads.
1171 \item[Use render farm] check this to turn on the render farm option.
1172 Once checked ALL rendering will be done via the farm including the
1173 usual Render (\texttt{Shift-R}). You may want to turn if off for
1175 \item[Nodes listbox] displays all the nodes on the render farm and
1176 shows which ones are currently enabled. The Nodes listbox has 4
1177 columns -- On, Hostname, Port, Framerate -- which show the current
1178 values. An \textit{X} in the \textit{On} designates that that host
1179 is currently enabled; \textit{Hostname} shows the name of the host;
1180 \textit{Port} shows the port number that host uses; and
1181 \textit{Framerate} will either be zero initially or the current
1183 \item[Hostname] this field is used to edit the hostname of an
1184 existing node or enter a new node.
1185 \item[Port] keyin the port number of an existing or new node here.
1186 You can also type in a range of port numbers using a hyphen, for
1187 example $10650-10799$ when you need to add many.
1188 \item[Apply Changes] this will allow you to edit an existing node
1189 and to then commit the changes to hostname and port. The changes
1190 will not be committed if you do not click the OK button.
1191 \item[Add Nodes] Create a new node with the hostname and port
1193 \item[Sort nodes] sorts the nodes list based on the hostname.
1194 \item[Delete Nodes] deletes whatever node is highlighted in the
1195 nodes list. You can highlight several at once to have them all
1197 \item[Client Watchdog Timeout] a default value of $15$ seconds is
1198 used here and the tumbler increments by $15$ seconds. A value of
1199 $0$ (zero) disables the watchdog so that if you have a slow client,
1200 it will not kill the render job while waiting for that client to
1202 \item[Total jobs to create] determines the number of jobs to
1203 dispatch to the render farm. Total jobs is used to divide a render
1204 job into that specified number of tasks. Each background job is
1205 assigned a timeline segment to process. The render farm software
1206 tries to process all of the rendering in parallel so that several
1207 computers can be used to render the results.
1209 To start, if you have computers of similar speed, a good number
1210 for \textit{Total jobs to create} is the number of computers
1211 multiplied by $3$. You will want to adjust this according to the
1212 capabilities of your computers and after viewing the framerates.
1213 Multiply them by $1$ to have one job dispatched for every node. If
1214 you have $10$ client nodes and one master node, specify $33$ to have
1215 a well balanced render farm.
1216 \item[(overridden if new file at each label is checked)] instead of
1217 the number of jobs being set to \textit{Total jobs to create}, there
1218 will be a job created for each labeled section. If in the render
1219 menu, the option \textit{Create new file at each label} is selected
1220 when no labels exist, only one job will be created. It may be quite
1221 advantageous to set labels at certain points in the video to ensure
1222 that a key portion of the video will not be split into two different
1224 \item[Reset rates] sets the framerate for all the nodes to $0$.
1225 Frame rates are used to scale job sizes based on CPU speed of the
1226 node. Frame rates are calculated only when render farm is enabled.
1229 Framerates can really affect how the Render Farm works. The first
1230 time you use the render farm all of the rates are displayed as $0$
1231 in the \texttt{Settings $\rightarrow$ Preferences}, Performance tab
1232 in the Nodes box. As rendering occurs, all of the nodes send back
1233 framerate values to the master node and the preferences page is
1234 updated with these values. A rate accumulates based on speed. Once
1235 all nodes have a rate of non-zero, the program gives out less work
1236 to lower rated nodes in an effort to make the total time for the
1237 render to be almost constant. Initially, when the framerate scaling
1238 values are zero, the program just uses package length -- render size
1239 divided by the number of packages to portion out the work (if not
1240 labels). If something goes wrong or the rates become suspect, then
1241 all of the rest of the work will be dumped into the last job. When
1242 this happens, you really should \textit{reset rates} for the next
1243 render farm session to restart with a good balance.
1245 \begin{lstlisting}[style=sh]
1246 {path_to_cinelerra}/cin -h # displays some of the options.
1249 \subsection{Detailed Setup Description}%
1250 \label{sub:detailed_setup_description}
1251 \index{render farm!setup}
1253 {\color{red} CAUTION }, any exact command lines worked as of
1254 $01/2018$ on a Fedora system. These can change over time and on
1255 different operating systems/levels. Always check/verify any command
1259 \item[Set up \CGG{}] A \CGG{} render farm is organized into a master
1260 node and any number of client nodes. The master node is the
1261 computer which is running the gui. The client nodes are anywhere
1262 else on the network with \CGG{} installed and are run from the
1263 command line. Before you start the master node for \CGG{}, you need
1264 to set up a shared filesystem on the disk storage node as this is
1265 the node that will have the common volume where all the data will be
1266 stored. The location of the project and its files should be the
1267 same in the client computers as in the master computer and to avoid
1268 problems of permissions, it is better to use the same user in master
1269 and clients. For example, if you have the project in
1270 \texttt{/home/<user>/project-video} you must create the same
1271 directory path on the clients, but empty. Sharing the directory of
1272 the location of your project on the master computer can be done with
1273 NFS as described next. Alternatively, you can look up on the
1274 internet how to use Samba to share a directory.
1275 \item[Create a shared filesystem and mount using NFS] All nodes in
1276 the render farm should use the same filesystem with the same paths
1277 to the project files on all of the master and client nodes. This is
1278 easiest to do by setting up an NFS shared disk system.
1280 \item On each of the computers, install the nfs software if not
1281 already installed. For example, on Debian 9 you will need to run:
1282 (be sure to check/verify before using any command line):
1283 \begin{lstlisting}[style=sh]
1284 apt-get install nfs-kernel-server
1286 \item On the computer that contains the disk storage to be shared,
1287 define the network filesystem. For example to export \texttt{/tmp},
1288 edit the \texttt{/etc/exports} file to add the following line:
1289 \begin{lstlisting}[style=sh]
1290 192.168.1.0/24(rw,fsid=1,no_root_squash,sync,no_subtree_check)
1292 \item Next reset the exported nfs directories using:
1293 \begin{lstlisting}[style=sh]
1295 \end{lstlisting} and you may have to start or restart nfs:
1296 \begin{lstlisting}[style=sh]
1297 systemctl restart nfs
1299 \item Each of the render farm computers must mount the exported
1300 nfs target path. To see the exports which are visible from a
1301 client, login as root to the client machine and keyin:
1302 \begin{lstlisting}[style=sh]
1303 showmount -e <ip-addr> #using the ip address of the storage host
1305 \item to access the host disk storage from the other computers in
1306 the render farm, mount the nfs export on the corresponding target
1307 path: (be sure to check/verify before using any command line):
1308 \begin{lstlisting}[style=sh]
1309 mount -t nfs <ip-addr>:/<path> <path>
1310 \end{lstlisting} where \texttt{<path>} is the storage host
1311 directory, and \texttt{<ip-addr>} is the network address of the
1312 storage host. Because all of the computers must have the same
1313 directory path, create that same directory path with the same
1314 uid/gid/permissions on each storage client computer ahead of time.
1315 \item To make this permanent across reboots on the client nodes,
1316 add the following line to \texttt{/etc/fstab}:
1317 \begin{lstlisting}[style=sh]
1318 {masternode}:/nfsshare /mnt nfs defaults 0 0
1319 \end{lstlisting} You can make this permanent on the disk storage
1320 host BUT the command lines shown, which were correct in January 2018
1321 on Fedora, may be different for your operating system or in the
1322 future. In addition if your network is not up, there may be
1323 numerous problems. If you make a mistake, your system may not boot.
1324 To make permanent, add the following line to \texttt{/etc/fstab}:
1325 \begin{lstlisting}[style=sh]
1326 192.168.1.12:/tmp /tmp nfs rw,async,hard,intr,noexec,noauto 0 0
1327 \end{lstlisting} You will still have to mount the above manually
1328 because of the \textit{noauto} parameter but you won’t have to
1329 remember all of the other necessary parameters. Depending on your
1330 expertise level, you can change that.
1332 Later, to remove access to the storage host filesystem:
1333 \begin{lstlisting}[style=sh]
1337 Be aware that you may have to adjust any security or firewalls
1338 you have in place. \textit{Most firewalls will require extra rules
1339 to allow nfs access}. Many have built-in configurations for this.
1341 \item[Configure Rendering on Master Node] There is 1 master node
1342 which is running the \CGG{} gui and where the video will be edited
1343 and the command given to start up the rendering. Any number of
1344 client computers can be run from the command line only, so they can
1345 be headless since no X or any graphical libraries are needed. Of
1346 course, the \CGG{} software must be installed on each of the client
1349 \item Assuming you already have \CGG{} installed on the master
1350 node, start \CGG{} by clicking on the icon or by typing the
1351 following command on the terminal screen:
1352 \texttt{/{cinelerra\_path}/cin}.
1353 \item Use the \textit{File} pulldown \texttt{Settings $\rightarrow$
1354 Preferences}, the Performance tab, to set up your Render Farm
1355 options in the Render Farm pane.
1356 \item Check the \textit{Use render farm} option. By default, once
1357 you enable the option of Render Farm, rendering is usually done
1358 using the render farm. Batch rendering can be done locally, or
1360 \item Add the hostname or the IP address of each of the client
1361 nodes in the Hostname textbox and the port number that you want to
1362 use in the Port textbox. You can make sure a port number is not
1363 already in use by keying in on the command line:
1364 \begin{lstlisting}[style=sh]
1365 netstat -n -l -4 --protocol inet
1366 \end{lstlisting} Next, click on the \textit{Add Nodes} button and
1367 then you will see that host appear in the Nodes list box to the
1368 right. The \texttt{X} in the first column of the nodes box denotes
1369 that the node is active. To review the \textit{standard} port
1370 allocations, check the \texttt{/etc/services} file.
1371 \item Enter the total jobs that you would like to be used in the
1372 \textit{Total job} textbox.
1373 \item The default watchdog timer initial state is usually just
1374 fine but can be adjusted later if needed.
1375 \item Click OK on the Preferences window when done.
1377 \item[Create Workflow] While working on the master computer, it is
1378 recommended that you keep all the resources being used on the same
1379 shared disk. Load your video/audio piece and do your editing and
1380 preparation. Add any desired plugins, such as a Title, to fine-tune
1381 your work. You want to make sure your video is ready to be rendered
1382 into the final product.
1383 \item[Start the Client Nodes] To start up the client nodes run
1384 \CGG{} from the command line on each of the client computers using
1385 the following command:
1386 \begin{lstlisting}[style=sh]
1387 /{cinelerra_pathname}/cin -d [port number]
1389 /mnt1/bin/cinelerra -d 401
1390 \end{lstlisting} This starts \CGG{} in command prompt mode so that
1391 it listens to the specified port number for commands from the master
1392 node for rendering. When you start each of the clients up, you will
1393 see some messages scroll by as each client is created on that
1395 \begin{lstlisting}[style=sh]
1396 RenderFarmClient::main_loop: client started
1397 RenderFarmClient::main_loop: Session started from 127.0.0.1
1398 \end{lstlisting} As it completes its jobs, you will should see:
1399 \begin{lstlisting}[style=sh]
1400 RenderFarmClientThread::run: Session finished
1402 \item[Render Using Render Farm] After you have followed the
1403 preceding steps, you are ready to use the render farm. Click on
1404 \texttt{File $\rightarrow$ Render}\dots which opens the render
1405 dialog. The most important point here is to use for \textit{the
1406 Output path / Select a file to render to} a path/file name that is
1407 on the shared volume that is also mounted on the clients. Click on
1408 OK to render. The \CGG{} program divides the timeline into the
1409 number of jobs specified by the user. These jobs are then
1410 dispatched to the various nodes depending upon the load balance. The
1411 first segment will always render on the master node and the other
1412 segments will be farmed out to the render nodes. Batch Rendering,
1413 as well as BD/DVD rendering, may use the render farm. Each line in
1414 the batchbay can enable/disable the render farm. Typically, video
1415 can be rendered into many file segments and concatenated, but
1416 normally audio is rendered as one monolithic file (not farmed).
1418 Another performance feature which can use the Render Farm is
1419 \textit{Background Rendering}. This is also enabled on the
1420 \texttt{Preferences $\rightarrow$ Performances} tab. The background
1421 render function generates a set of image files by pre-rendering the
1422 timeline data on the fly. As the timeline is update by editing, the
1423 image data is re-rendered to a \textit{background render} storage
1424 path. The Render Farm will be used for this operation if it is
1425 enabled at the same time as the \textit{background render} feature.
1426 \item[Assemble the Output Files] Once all of the computer jobs are
1427 complete, you can put the output files together by using the shell
1428 script, \textit{RenderMux} (from the menubar \textit{scripts} button
1429 just above FF), if the files were rendered using ffmpeg (see \nameref{sec:menu_bar_shell_commands}).
1431 If you want to remain within the open project in \CGG{}, you can load these files by creating a new track and specifying concatenate to
1432 existing tracks in the load dialog in the correct numerical order.
1433 File types which support direct copy can be concatenated into a
1434 single file by rendering to the same file format with render farm
1435 disabled as long as the track dimensions, output dimensions, and
1436 asset dimensions are equal.
1438 Finally if you want to use ffmpeg from terminal externally to \CGG{} you can go to the directory where the rendered files are, it creates a text file \texttt{list.txt} containing the list of all our files:
1439 \begin{lstlisting}[style=sh]
1445 and finally give the command
1446 \begin{lstlisting}[style=sh]
1447 ffmpeg -f concat -i list.txt -c copy output.webm
1451 \subsection{Quick and Easy Render Farm Setup – The Buddy System
1453 \label{sub:buddy_system_way}
1455 These steps are for quickly setting up render farm with the least
1456 amount of additional system work, but it is non-optimal. It is
1457 useful in situations where a few people all show up with their
1458 laptops to work together on the same video/audio file and you don’t
1459 want to bother setting up NFS for a shared disk.
1462 \item Make sure the \CGG{} program is installed on all of the
1463 computers and the network between the main computer and the client
1464 computers is working. Use the same version if possible.
1465 \item Load your video file on the master node and use \texttt{File
1466 $\rightarrow$ Save as}\dots to save it to \texttt{/tmp}.
1467 \item Move that same file with the same name to \texttt{/tmp} on all
1468 of the client computers via rsh or sneaker net -- the ONLY reason
1469 you are doing this is to avoid having to set up NFS or Samba on the
1470 buddy client laptops that show up!
1471 \item Edit your video/audio file to get it the way you want it and
1472 add the plugins, such as a Title, etc.
1473 \item Check for a set of unused ports in \texttt{/etc/services}
1474 file, if username is root usually $401-425$ are available; if
1475 non-root, then $10650-10799$.
1476 \item On the master computer, in \texttt{Settings $\rightarrow$
1477 Preferences, Performance} tab:
1479 \item check the box \textit{Use render farm}
1480 \item keyin localhost for the hostname or an ip address of the
1482 \item keyin the desired port number for each client; and use
1483 \textit{Add Node} for each host
1484 \item set total jobs to the number of client computers $+1$
1485 multiplied by $3$ (or proportion to client speeds)
1488 \item On each buddy client, create a job for each port:
1489 \begin{lstlisting}[style=sh]
1490 /{cinelerra_pathname}/cin -d port#
1492 \item On the master, bring up the render menu and name the output
1493 files, for example \texttt{/tmp/myoutput.webm}.
1494 \item The client nodes output results will be on their local
1495 \texttt{/tmp} filesystems so you will have to again use
1496 \textit{rsh/ftp} or \textit{usb sneaker net} to move them over to
1497 the main computer. File names will be the render job output file
1498 name with port number tacked on
1499 (e.g. \texttt{/tmp/hb.webm001...webm005}).
1500 \item Load the files by concatenate to existing track on the master
1501 node or use RenderMux shell script.
1504 \subsection{Multi-core Computers Render Farm Setup}%
1505 \label{sub:multi_core_render_farm_setup}
1506 \index{render farm!multi core CPU}
1508 If you are lucky enough to have a computer with a large cpu core
1509 count, setting up a render farm can really take advantage of using
1510 all of the cores at 100\%. This is much faster than the default automatic
1511 threading capability. Since you don’t need to communicate with other
1512 computers, you will not have to be concerned about TCP communication
1513 or shared disks/files; only localhost nodes. On the terminal we will open many instances of \CGG{} by connecting them to the jobs created. The number of such jobs can be the total number of CPU threads (-1) or not. When you are going to be doing other work
1514 simultaneously while rendering a large job, you will want to leave
1515 some of the cpus available for that. Be sure to set \textit{Project SMP
1516 cpus} in the \texttt{Settings $\rightarrow$ Preferences, Performance} tab to your CPU
1519 \subsection{Troubleshooting Tips and Warnings}%
1520 \label{sub:troubleshhoting_tips_warnings}
1521 \index{render farm!troubleshooting}
1523 \noindent If you have problems running the Render Farm. Here is a
1524 list of items to check.
1527 \item \CGG{} must be installed on the master node and all client
1529 \item It is best to have the same username available on all nodes to
1530 avoid problems with access rights.
1531 \item Check file permissions and ownership to ensure that the
1532 clients all have access.
1533 \item If a node does not have access to an input asset it will not
1534 die, but just display error messages.
1535 \item If a node can not access an output asset, the rendering will
1537 \item A port in use when stopped may take up to $30$ seconds to time
1538 out before you can restart the jobs.
1539 \item Each of the port combinations have to be unique across
1540 clients, and not already in use in the network.
1541 \item \CGG{} load balances on a first come, first serve basis. If
1542 the last section of the video is sent to the slowest node, the
1543 render job will have to wait for the slowest node to finish. It
1544 would be better to start on the slowest node with the earlier
1545 section of the video so keep that in mind when designating port
1547 \item If not running as root, a port number in the higher range of
1548 $10650$ and above must be used instead of the $401+$ range.
1549 \item The master and client jobs on the ports do not go away so if
1550 you want to stop them, you will have to kill them via: \texttt{kill
1552 \item Check to see if there are services listening on the ports to
1553 use: \texttt{netstat -n -l -4 --protocol inet}
1554 \item There is a watchdog timer in \CGG{} and if there is no
1555 response from a client in the designated number of seconds, it will
1556 kill the render job.
1557 \item The \textit{localhost} should exist as $127.0.0.1$ in
1558 \texttt{/etc/hosts} and as the \texttt{lo} network device in
1560 \item If the job loads become unbalanced, you may want to
1561 \textit{reset rates} to start over for new framerates.
1562 \item If jobs are split in a key section on the timeline, you may
1563 wish to \textit{use labels} to prevent this.
1564 \item For testing purposes, you may want to start a client in the
1565 foreground using \texttt{-f} instead of \texttt{-d}.
1566 \item If one of the client computers is unavailable, check to see if
1567 there is an \texttt{X} to the left of the \texttt{nodename} in the
1568 Nodes listbox. Check the \texttt{X} to disable it which sets ON to
1570 \item A red message in the lower left hand corner of the main
1571 timeline that reads \textit{Failed to start render farm} often means
1572 that the client \CGG{} programs were not started up.
1573 \item A message of \texttt{RenderFarmWatchdog::run 1 killing server
1574 thread \\ \#address\#} means that the client did not respond in
1575 time. You can adjust the timer in \texttt{Settings $\rightarrow$
1576 Preferences, Performance} tab.
1577 \item When you get the message \texttt{RenderFarmClient::main\_loop:
1578 bind port 400: Address already in use}, use a different port. See \texttt{/etc/services} for free ports.
1579 \item A message of \texttt{RenderFarmServerThread::open\_client:
1580 unknown host abcompany} means that the hostname of abcompany is not
1581 in \texttt{/etc/hosts} so you will have to add it or use the ip
1583 \item There are numerous error messages associated with file
1584 \textit{open/close/status} or problems with the file that should be
1585 dealt with according to what is printed out.
1586 \item Other illustrative messages may be shown such as:
1587 \texttt{RenderFarmClientThread:: run: Session finished}.
1590 And here are a couple of more tips for making Render Farm specific
1593 \item Because \textit{index files} speed up displaying the video you
1594 may want to share these files with the clients on a shared
1595 filesystem. More information on index files configuration is
1596 outlined in~\ref{sub:index_file_section}.
1597 \item Or, one of the convenient features of \CGG{} is the
1598 redirection of the path via \texttt{CIN\_CONFIG} as in:
1599 \begin{lstlisting}[style=sh]
1600 CIN_CONFIG="/<shared_file_pathname>/<filename_such_as_.bcast5>" cin
1601 \end{lstlisting} This means that you can make project related
1602 configurations that do not impact the default \texttt{\$HOME}
1603 config. You can either export your default \texttt{\$HOME} config
1604 or the \texttt{CIN\_CONFIG} config to use on the render farm.
1607 \paragraph{Warnings}
1609 If one of the render farm computers is connected to the internet,
1610 you should use a firewall to maintain the safety of all of the
1611 computers. The ports have to be reachable for the intranet but you
1612 do not want the ports to be open to the outside.
1614 %%% Local Variables:
1616 %%% TeX-master: "../CinelerraGG_Manual"