Credit Andrea - new color wheel image and explanation for ChromaKeyHSV

[goodguy/cin-manual-latex.git] / parts / Rendering.tex

diff --git a/parts/Rendering.tex b/parts/Rendering.tex
index 23ff4514904238b8e9ebdceaa3bfb31e33d8089d..e221c5778f0907ace8ad905c10c926ffde5b9379 100644 (file)
--- a/parts/Rendering.tex
+++ b/parts/Rendering.tex
@@ -13,7 +13,8 @@ in/out points are set, the affected region is rendered.  When no
 region is highlighted, everything after the insertion point is
 rendered.  By positioning the insertion point at the beginning of a
 track and unsetting all in/out points, the entire track is rendered.
 region is highlighted, everything after the insertion point is
 rendered.  By positioning the insertion point at the beginning of a
 track and unsetting all in/out points, the entire track is rendered.

-But you also have the choice to render \textit{one frame}.
+But you also have the choice to render \textit{one frame}. Reminder,
+\CGG{} does not do remuxing without rendering - see \nameref{sec:transcode}.

 
 \section{Single File Rendering}%
 \label{sec:single_file_rendering}
 
 \section{Single File Rendering}%
 \label{sec:single_file_rendering}


@@ -512,10 +513,12 @@ There are currently 6 specific variations within the ffmpeg (file format) / yout
 The first 3 below, plus any of the VP9 files under the file type of \textit{webm} are the recommended options to use because they are freely usable in any circumstance.
 
 \begin{center}
 The first 3 below, plus any of the VP9 files under the file type of \textit{webm} are the recommended options to use because they are freely usable in any circumstance.
 
 \begin{center}

-       \begin{tabular}{l p{8cm}}
+       \begin{tabular}{lp{8cm}}
+               \hline

                sd.youtube & Standard Definition use with default audio/Opus stereo.youtube \\
                hd.youtube & High Definition “ “ \\
                uhd.youtube & Ultra High Definition “ “ \\
                sd.youtube & Standard Definition use with default audio/Opus stereo.youtube \\
                hd.youtube & High Definition “ “ \\
                uhd.youtube & Ultra High Definition “ “ \\

+               \hline

        \end{tabular}
 \end{center}
 
        \end{tabular}
 \end{center}
 


@@ -524,10 +527,12 @@ For more details and options on VP9, see: {\small\url{https://developers.google.
 Alternatives based on h264 and for non-commercial use are listed below.  For Dailymotion, these must be renamed to have a different extension of .mp4 instead of .youtube before uploading.
 
 \begin{center}
 Alternatives based on h264 and for non-commercial use are listed below.  For Dailymotion, these must be renamed to have a different extension of .mp4 instead of .youtube before uploading.
 
 \begin{center}

-       \begin{tabular}{l p{8cm}}
+       \begin{tabular}{lp{8cm}}
+               \hline

                sd\_h264.youtube & Standard Definition – must change to audio stereo\_with\_h264.youtube \\
                hd\_h264.youtube & High Definition -          “ “ \\
                uhd\_u264.youtube & Ultra High Definition - “ “ \\
                sd\_h264.youtube & Standard Definition – must change to audio stereo\_with\_h264.youtube \\
                hd\_h264.youtube & High Definition -          “ “ \\
                uhd\_u264.youtube & Ultra High Definition - “ “ \\

+               \hline

        \end{tabular}
 \end{center}
 
        \end{tabular}
 \end{center}
 


@@ -565,11 +570,13 @@ Bitrate (bit rate)
 
 \textit{mode:}
 
 
 \textit{mode:}
 

-\begin{tabular}{p{6cm} p{10cm}}
+\begin{tabular}{p{6cm}p{10cm}}
+       \hline

        Constant Quantizer (Q) & Allows you to specify a fixed quantizer value; bitrate will vary \\
        Constrained Quality (CQ) & Allows you to set a maximum quality level. Quality may vary within bitrate parameters\\
        Variable Bitrate (VBR) & Balances quality and bitrate over time within constraints on bitrate\\
        Constant Bitrate (CBR) & Attempts to keep the bitrate fairly constant while quality varies\\
        Constant Quantizer (Q) & Allows you to specify a fixed quantizer value; bitrate will vary \\
        Constrained Quality (CQ) & Allows you to set a maximum quality level. Quality may vary within bitrate parameters\\
        Variable Bitrate (VBR) & Balances quality and bitrate over time within constraints on bitrate\\
        Constant Bitrate (CBR) & Attempts to keep the bitrate fairly constant while quality varies\\

+       \hline

 \end{tabular}
 
 CQ mode is recommended for file-based video (as opposed to streaming). The following FFMpeg command-line parameters are used for CQ mode:
 \end{tabular}
 
 CQ mode is recommended for file-based video (as opposed to streaming). The following FFMpeg command-line parameters are used for CQ mode:


@@ -577,11 +584,13 @@ CQ mode is recommended for file-based video (as opposed to streaming). The follo
 \textit{FFMpeg}:
 
 \begin{center}
 \textit{FFMpeg}:
 
 \begin{center}

-       \begin{tabular}{{p{4cm} p{10cm}}}
+       \begin{tabular}{p{4cm}p{10cm}}
+               \hline

                -b:v <arg> & Sets target bitrate (e.g. 500k)\\
                -minrate <arg> & Sets minimum bitrate.\\
                -maxrate <arg> & Sets maximum bitrate.\\
                -crf <arg> & sets maximum quality level. Valid values are 0-63, lower numbers are higher quality.\\
                -b:v <arg> & Sets target bitrate (e.g. 500k)\\
                -minrate <arg> & Sets minimum bitrate.\\
                -maxrate <arg> & Sets maximum bitrate.\\
                -crf <arg> & sets maximum quality level. Valid values are 0-63, lower numbers are higher quality.\\

+               \hline

        \end{tabular}
 \end{center}
 
        \end{tabular}
 \end{center}
 


@@ -999,7 +1008,9 @@ the \texttt{Preferences} window. It has one interactive function
 sets the point where background rendering starts up to the position
 of the insertion point. If any video exists, a red bar appears in
 the time ruler showing what has been background rendered
 sets the point where background rendering starts up to the position
 of the insertion point. If any video exists, a red bar appears in
 the time ruler showing what has been background rendered

-(figure~\ref{fig:back-ren02}).
+(figure~\ref{fig:back-ren02}).  Because this creates a very large number 
+of files, a Shell Command script is available to delete them if in the
+default location.

 
 \begin{figure}[htpb] \centering
   \includegraphics[width=1.0\linewidth]{back-ren02.png}
 
 \begin{figure}[htpb] \centering
   \includegraphics[width=1.0\linewidth]{back-ren02.png}


@@ -1038,7 +1049,10 @@ rates (figure~\ref{fig:back-ren}).
   created, ls commands will not work in the background rendering
   directory. The browse button for this option normally will not work
   either, but the configuration button for this option works. The
   created, ls commands will not work in the background rendering
   directory. The browse button for this option normally will not work
   either, but the configuration button for this option works. The

-  default value will be /tmp/brender .
+  default value will be /tmp/brender .  Because using background
+  rendering creates a voluminous number of brender numbered files,
+  a Shell Command script is available to delete them if they are
+  in the default /tmp/brender format.

 \item[File format] The file format for background rendering has to
   be a sequence of images. The format of the image sequences
   determines the quality and speed of playback. JPEG generally works
 \item[File format] The file format for background rendering has to
   be a sequence of images. The format of the image sequences
   determines the quality and speed of playback. JPEG generally works


@@ -1100,15 +1114,18 @@ Let's take the example of a network with 2 PCs: the master and the client. On th
     can use privileged ports) or $10650...$ for non-root and click on \textit{Add Nodes}. To find a range of free ports to use you can look at the file \texttt{/etc/services};
   \item you will see something like the following in the Nodes
     listbox to the right:\newline
     can use privileged ports) or $10650...$ for non-root and click on \textit{Add Nodes}. To find a range of free ports to use you can look at the file \texttt{/etc/services};
   \item you will see something like the following in the Nodes
     listbox to the right:\newline

-    \begin{tabular}{lllc} On & Hostname & Port & Framerate
-      \\\midrule
-      X & 192.168.1.12 & 10650 & 0.0 \\
-      X & 192.168.1.12 & 10651 & 0.0 \\
-      X & 192.168.1.12 & 10652 & 0.0 \\
-      X & 192.168.1.12 & 10653 & 0.0 \\
-      X & 192.168.1.12 & 10654 & 0.0 \\
-      X & localhost & 10655 & 0.0 \\
-      X & localhost & 10656 & 0.0 \\
+    \begin{tabular}{lllc}
+       \hline
+       On & Hostname & Port & Framerate\\
+        \hline
+        X & 192.168.1.12 & 10650 & 0.0 \\
+        X & 192.168.1.12 & 10651 & 0.0 \\
+        X & 192.168.1.12 & 10652 & 0.0 \\
+        X & 192.168.1.12 & 10653 & 0.0 \\
+        X & 192.168.1.12 & 10654 & 0.0 \\
+        X & localhost & 10655 & 0.0 \\
+        X & localhost & 10656 & 0.0 \\
+        \hline

     \end{tabular}
   \item set the Total number of jobs to create. This number only pertains to client nodes, so we do not need to consider the master node;
   \item click OK on the bottom of the Preferences window.
     \end{tabular}
   \item set the Total number of jobs to create. This number only pertains to client nodes, so we do not need to consider the master node;
   \item click OK on the bottom of the Preferences window.