\CGG{}’s default setup is in the file \texttt{\$CIN\_DAT/expan\-ders.txt} but if the user wants their own specific setup and if the file in \texttt{\$HOME/.\\bcast5/expanders.txt} exists, it will take precedence.
If there are recommendations for other relevant categories, they can be added. The subtree structure is applicable to any of the \textit{Video Effects/Transitions} or \textit{Audio Effects/Transitions}. You can not sort once an expansion is in effect (figure~\ref{fig:expander}).
-The \texttt{expanders.txt} file has very specific requirements. The most specific is that there are no blanks -- you must use tabs only. A \# (pound sign) can be used in column 1 to indicate a comment. Here is a short example:
+The \texttt{expanders.txt} file has very specific requirements. The most specific is that there are no blanks -- you must use tabs only. A \# (pound sign) can be used in column 1 to indicate a comment. A short example of what the txt file looks like is shown below.
\begin{figure}[htpb]
\centering
\begin{lstlisting}[style=sh]
Video Effects
+ -Favorites
+ Brightness/Contrast
+ Title
+ VideoScope
- Color_Correction
Blue Banana
Color 3 Way
L2_Calf Fluidsynth
\end{lstlisting}
+NOTE: The capability to put the expanders.txt file in \texttt{./bcast5} (see \nameref{sec:bcast5}) allows for customizations such as grouping favorite plugins in one section so that they can be recalled more quickly. For this purpose, the \textit{Favorites} section has been included at the top of Video Effects, the contents can be changed as desired. Once your modified file is saved to hard disk as \$HOME/.bcast5/expanders.txt it will remain in use on every update as long as you do not delete it or remove the .bcast subdirectory.
+For users running \CGG{} using the AppImage, to make an initial copy of expanders.txt, execute the
+following lines on /tmp:
+\begin{lstlisting}[numbers=none]
+ git clone --depth 1 "git://git.cinelerra-gg.org/goodguy/cinelerra.git" cinelerra5
+ cp /tmp/cinelerra5/cinelerra-5.1/expanders.txt $HOME/.bcast5/expanders.txt
+\end{lstlisting}
+
\subsection{Speed-up of Ffmpeg plugin usage with OPTS files}%
\label{sub:speedup_ffmpeg_plugin_opts}
\index{plugins!speed-up via options}
\index{delay audio}
In the Delay Audio effect you can specify the number of seconds you want to delay the video track.
+An alternative ffmpeg plugin is F\_adelay.
\subsection{DeNoise}%
\label{sub:denoise}
\item[Damp:] echo envelope decay factor used to smooth the cepstrum/correlation data.
\item[Peaks:] number of maximal envelope values used in the echo gain calculation.
\item[Cutoff Hz:] low frequency cutoff value to prevent beat frequency (\textit{heterodyne}) echo canceling.
- \item[Mode:] \textit{MAN}, \textit{Off}, or \textit{On}. When Off is selected, the plugin is not active. When MAN is used, the only one peak is used for the echo gain envelope. It is set by pressing mouse button $1$ in the ceptstrum graphical output. The Gain and Offset are updated as the pointer drag operation resets the indicated gain and offset values. When On is selected, the echo gain envelope is automatically calculated by cepstrum and auto-correlation of the input audio in the last window size audio samples.
+ \item[Mode:] \textit{MAN}, \textit{Off}, or \textit{On}. When Off is selected, the plugin is not active. When MAN is used, the only one peak is used for the echo gain envelope. It is set by pressing mouse button $1$ (LMB) in the ceptstrum graphical output. The Gain and Offset are updated as the pointer drag operation resets the indicated gain and offset values. When On is selected, the echo gain envelope is automatically calculated by cepstrum and auto-correlation of the input audio in the last window size audio samples.
\item[Windows size:] parameter can be set to \textit{Default}, $1024$, $2048$, \dots \textit{doubled values\dots} up to $262144$.
\item[Amplitude:] the cepstrum value at the drag point during manual envelope selection.
\item[Gain:] echo gain setting determined by manual selection.
\label{sub:motion51}
\index{Motion51}
-Note: Motion and Motion51 plugins are complex and slow to use for video stabilization. If you are stabilizing an entire video, you may want to preporcess by using ffmpeg's \textit{vidstabdetect} and \textit{vidstabtransform} plugins before importing the video into \CGG{}.
+Note: Motion and Motion51 plugins are complex and slow to use for video stabilization. If you are stabilizing an entire video, you may want to preprocess by using ffmpeg's \textit{vidstabdetect} and \textit{vidstabtransform} plugins before importing the video into \CGG{}.
This plugin compensates for unwanted motion and stabilizes the picture. The \textit{Motion51} Plugin simplifies motion stabilization so that without a lot of tweaking you can easily achieve reasonable results, either by using the defaults or varying a single parameter. Since the motion in every clip is specific, there are some additional parameters useful to adjust the settings accordingly.
The Motion51 plugin uses different methods for tracking than the other motion plugins. Motion Stabilization is very useful if you have jittery video, for example when taken from a car window, or while walking.
\label{sub:motion}
\index{Motion}
-Note: Motion and Motion51 plugins are complex and slow to use for video stabilization. If you are stabilizing an entire video, you may want to preporcess by using ffmpeg's \textit{vidstabdetect} and \textit{vidstabtransform} plugins before importing the video into \CGG{}.
+Note: Motion and Motion51 plugins are complex and slow to use for video stabilization. If you are stabilizing an entire video, you may want to preprocess by using ffmpeg's \textit{vidstabdetect} and \textit{vidstabtransform} plugins before importing the video into \CGG{}.
The \textit{motion tracker} is almost a complete application in itself. The motion tracker tracks two types of motion: \textit{translation} and \textit{rotation}. It can track both simultaneously or one only. It can do $\frac{1}{4}$ pixel tracking or single pixel tracking. It can stabilize motion or cause one track to follow the motion of another track. Although the motion tracker is applied as a realtime effect, it usually must be rendered to see useful results. The effect takes a long time to precisely detect motion so it is very slow.
\label{sub:yuv411}
\index{yuv411}
-Modify the 411 yuv to look like 420 color space instead. If the edit to which the effect is applied is not YUV type, a red warning message will appear.
+YUV411 plugin\protect\footnote{credit Eric Olson}
+modifies the 411 yuv to look like 420 color space instead. If the edit to which the effect is applied is not YUV type, a red warning message will appear.
\subsection{YUVShift}%
\label{sub:yuvshift}
To build findobject and the other plugins using OpenCV, access the src using git:
\begin{lstlisting}[style=sh]
-git clone -depth 1 "git://git.cinelerra-gg.org/goodguy/cinelerra.git" cinelerra5
+git clone --depth 1 "git://git.cinelerra-gg.org/goodguy/cinelerra.git" cinelerra5
\end{lstlisting}
To use the latest version, the method for creating a tarball is:
audio channels. When using this plugin, be sure to \textit{attach
effect} to all audio tracks by dragging the plugin to the $1^{st}$
audio track and then right mouse clicking all subsequent audio
- tracks which brings up an menu. Highlight the effect shown in the
+ tracks which brings up a menu. Highlight the effect shown in the
middle section and click OK.
\item [F\_flanger]~\\Applies a flanging effect to the audio.
\item [F\_haas]~\\Apply Haas Stereo Enhancer for a more
projects / goodguy / cin-manual-latex.git / blobdiff