\vspace{2ex}
\begin{tabular}{lll}
+ \hline
Path: & output media file path & \\
Start time: & weekday/time of day & to begin capture\\
\multirow{2}*{Mode:} & timed & use start time/duration \\
- & untimed & use transport controls\\
+ & untimed & use transport controls\\
+ \hline
\end{tabular}
\vspace{2ex}
\label{sub:remote_control_dvb}
\index{capture!remote control for DVB}
-\CGG{} DVB recording/playback can now easily be done in \textit{couch potato} mode using a remote control. This comes in handy when you want to playback on a big TV screen for multiple person viewing. You can use the Application/Menu key on the keyboard to toggle between standard \CGG{} usage or a Dispatcher methodology through use of a remote control, an Android programmed device such as a tablet, or keyboard. The Application/Menu key on most keyboards is between the Alt and Ctrl keys on the right hand side bottom and depicts a menu on it either with or without a pointer (see image below). An ati-x10 Remote Control device (figure~\ref{fig:remote01}) is currently working with \CGG{} and other remote controls may work but have never been tried. The red/orange box on the top left main screen of \CGG{} indicates Dispatcher Method access is activated which allows for keyboard grab which routes all key strokes until toggled off. Below are the currently defined operations.
+\CGG{} DVB recording/playback can now easily be done in \textit{couch potato} mode using a remote control. This comes in handy when you want to playback on a big TV screen for multiple person viewing. You can use the Application/Menu key on the keyboard to toggle between standard \CGG{} usage or a Dispatcher methodology through use of a remote control, an Android programmed device such as a tablet, or keyboard. The Application/Menu key on most keyboards is between the Alt and Ctrl keys on the right hand side bottom and depicts a menu on it either with or without a pointer (see image below). THe Menu key is keycode 135. An ati-x10 Remote Control device (figure~\ref{fig:remote01}) is currently working with \CGG{} and other remote controls may work but have never been tried. The red box on the top left main screen of \CGG{} indicates Dispatcher Method access is activated which allows for keyboard grab which routes all key strokes until toggled off. Below are the currently defined operations.
\begin{figure}[htpb]
\centering
Remote Control Keys (Application/Menu key toggle for ati-x10 remote)
% Should find something so that the last column width automatically adapts to margin/font/pagesize.
-\begin{tabular}{lc p{12cm}}
- \toprule
+\begin{tabular}{lcp{12cm}}
+ \hline
up arrow&=&forward 1 minute\\
down arrow&=&forward single frame\\
book key&=&toggles channel scan (always available)\\
hand key&=&terminates \CGG{} (always available)\\
- \bottomrule
+ \hline
\end{tabular}
\noindent Plus usual Transport keys:
\begin{tabular}{lcl}
- \toprule
+ \hline
e&=&??\\
f&=&toggle full screen\\
square&=&stop\\
2 lines&=&fast reverse\\
- \bottomrule
+ \hline
\end{tabular}
The Application/Menu key \quad
\item After you install the new phone/tablet app in step 1, start it up from your apps menu.
\end{enumerate}
-Before you can use it, the Android device must have the ip address of your computer entered into the configuration menu. The PC you are running \CGG{} on and the Android device have to be on the same network. You can tell it is in communication by tapping the \texttt{Power} (menu) button. When the remote is operated with the \textit{Power} (menu) button, there is a little orange box on the upper left corner of the display to indicate the remote state is active. If you do not see the little orange box when the menu key is tapped, the communication is broken and must be fixed before proceeding. Follow the directions in the paragraph below.
+Before you can use it, the Android device must have the ip address of your computer entered into the configuration menu. The PC you are running \CGG{} on and the Android device have to be on the same network. You can tell it is in communication by tapping the \texttt{Power} (menu) button. When the remote is operated with the \textit{Power} (menu) button, there is a little red box on the upper left corner of the display to indicate the remote state is active. If you do not see the little red box when the menu key is tapped, the communication is broken and must be fixed before proceeding. Follow the directions in the paragraph below.
BIG NOTICE: the firewalls in your computer and wifi router can stop this thing dead. Re-configuring a firewall is tricky and varies from distro to distro. If possible, during setup it is suggested that you disable the firewall temporarily. For those with advanced skills, use tcpdump or wireshark to look for udp messages from the IP address of the device.
[ 4007.420828] hid-generic 0003:534D:0021.0009: hiddev97,hidraw0: USB HID v1.10 Device [MACROSILICON AV TO USB2.0] on usb-0000:16:00.3-1.2/input4
\end{lstlisting}
-\newpage
-
\subsection{Use Case \#2 – Hauppauge WinTV-HVR}
\label{sub:use_case_wintv}
\index{capture!Hauppage WinTV}
projects / goodguy / cin-manual-latex.git / blobdiff