\paragraph{Split --- blade cut and hard edges:} You can cut the tracks into 2 pieces on the timeline by putting the hairline cursor on the place you want to do a cut and then using the character “x” or the scissors tool (figure~\ref{fig:cut}).
-\begin{wrapfigure}[16]{O}{0.3\textwidth}
+\begin{wrapfigure}[16]{O}{0.3\linewidth}
+ \vspace{-1ex}
\centering
\includegraphics[width=0.9\linewidth]{images/cut.png}
\caption{Blade cut}
\begin{itemize}
\item Do your editing as usual on the timeline until you are ready to see what is used or unused.
- \item Make sure you are in Preview mode in the Resources window; you enable this mode using the menu
- \textit{Full play} to the left of the word Search \quad
- \includegraphics[height=\baselineskip]{images/fullplay.png}.
- \item Middle mouse click on a thumbnail in the Resources window and a popup occurs of that media with a
- white colored bar at the top and a red colored bar at the bottom with black sections.
+ \item Make sure you are in any of the Preview modes in the Resources window; you enable the mode using the pulldown to the left of the word Search. The option looks like this
+ \quad \includegraphics[height=\baselineskip]{images/fullplay.png}. \item Middle mouse click on a thumbnail in the Resources window and a popup occurs of that media with a
+ white colored bar at the top and a red colored bar at the bottom with black sections.
\end{itemize}
The red/white bars represent the presence and the black sections represent the absence of where that media is used on the timeline. To get to a bigger representation, use the “f” key for a full screen. Now
\paragraph{Cutting/Snapping edits} cuts from an edit handle to the insert point.
There are Edit Panel buttons which normally are used to move to the previous or next edit handle/label.
-
-\begin{wrapfigure}[8]{O}{0.3\textwidth}
- \vspace{-2ex}
+\begin{wrapfigure}[5]{r}{0.2\linewidth}
+ \vspace{-1ex}
\centering
- \includegraphics[width=0.99\linewidth]{images/snap.png}
+ \includegraphics[width=0.7\linewidth]{images/snap.png}
\end{wrapfigure}
-
They look like tags and the letter E on the menu bar and are oriented forward/backward. These same buttons can be used to \textit{cut} from the insert pointer to the previous or next edit/label when the \texttt{ctrl+alt} keys are both pressed when the buttons are used. They \textit{snap} off the media instead of doing the standard re-positioning. This is useful to minimize the number of operations necessary to cut between edits/labels.
Instead of using the edit panel buttons, you can more easily use the following keyboard shortcuts to perform the same functions:
\noindent When done, you will have to Ctrl-C to get out of the program.
-\paragraph{Note 4} For developers, it is also possible to do the following for further in depth testing:
- \begin{lstlisting}[language=Bash]
-# to locate numerical value of the shuttle, e.g. 0003:0B33.0030.0006
-$ ls /sys/kernel/debug/hid
-$ cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/rdesc” # substitute your own numerical value
-$ cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/events” # press keys to see the results
- \end{lstlisting}
+\paragraph{Note 4} For developers, if you have a pre-UEFI Secure Boot kernel it is also possible to do the following for further in depth testing:
+
+\begin{enumerate}
+ \item \texttt{ls /sys/kernel/debug/hid \# to locate numerical value of the shuttle, e.g. 0003:0B33.0030.0006}
+ \item \texttt{cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/rdesc” \# substitute your own numerical value}
+ \item \texttt{cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/events” \# press keys to see the results}
+\end{enumerate}
\subsection{Shuttle key default arrangement for Cinelerra / Composer / Viewer:}%
\label{sub:shuttle_key_default_cinelerra}
-The following is the default setting for the ShuttlePROv2 and ShuttleXpress (table~\ref{tab:shuttleprov2} and table 2):
-
-\vspace{1ex} \textbf{ShuttlePROv2:}
-
-\begin{table}
- \caption{ShuttlePROv2 key default arrangement for Cinelerra / Composer / Viewer}
- \label{tab:shuttleprov2}
- \centering
- \begin{tabular}{c c c c c c c c}
- \toprule
- & K1 & & K2 & & K3 & & K4 \\
- & Label & & Future use & & Future use & & Clip \\
- & & & Splice (viewer) & & Copy & & Overwrite (viewer) \\
- \midrule
-
- \end{tabular}
-\end{table}
+The following is the default setting for the ShuttlePROv2 and ShuttleXpress (table~\ref{tab:shuttleprov2} and table~\ref{tab:xpress}):
+\begin{landscape}
+ \begin{table}[htpb]
+ \centering
+ \caption{ShuttlePROv2 key default arrangement for Cinelerra / Composer / Viewer}
+ \label{tab:shuttleprov2}
+ \begin{tabular}{c c c c c c c}
+ \toprule
+ K1 & K2 & & K3 & K4 & & \\
+ Label & Future use & & Future use & Clip & & \\
+ & Splice (viewer) & & Copy & Overwrite (viewer) & & \\
+ \midrule
+ K5 & K6 & K7 & K8 & K9 & & \\
+ Home & Reverse & Stop & Play & End & & \\
+ & & Fullscreen & & & & \\
+ & & (viewer / compositor) & & & & \\
+ \midrule
+ Home(Defaults) & MouseBtn1(D) & MouseBtn2(D) & MouseBtn3(D) & End(Defaults) & & \\
+ \midrule
+ \multicolumn{7}{c}{Shuttle Outer Wheel} \\
+ \multicolumn{7}{c}{Play forward (first row) or Play reverse (second row)} \\
+ S1=Stop & S2=1/2 & S3=Normal & S4=2x & S5=4x & S6=8x & S7=16x \\
+ S-1=Stop & S-2=1/2 & S-3=Normal & S-4=2x & S-5=4x & S-6=8x & S-7=16x \\
+ \midrule
+ K14 & & Jog Left & (Inner Wheel) & Jog Right & & K15 \\
+ Toggle In & & Frame reverse & & Frame forward & & Toggle Out \\
+ & & Scroll up(Defaults) & & Scroll down(Defaults) & & \\
+ \midrule
+ & & K10 & & K11 & & \\
+ & & Previous Edit & & Next Edit & & \\
+ & & Future Use(Viewer) & & Future Use(Viewer) & & \\
+ \midrule
+ & & K12 & & K13 & & \\
+ & & Previous Edit & & Next Edit & & \\
+ & & Previous Label & & Next label & & \\
+ \bottomrule
+ \end{tabular}
+ \end{table}
+\end{landscape}
+
+\begin{landscape}
+ \begin{table}[htpb]
+ \centering
+ \caption{ShuttleXpress key default arrangement for Cinelerra / Composer / Viewer}
+ \label{tab:xpress}
+ \begin{tabular}{c c c c c c c}
+ \toprule
+ K5 & K6 & K7 & K8 & K9 & & \\
+ Home & Reverse & Stop & Play & End & & \\
+ & & Fullscreen & & & & \\
+ & & (viewer / compositor) & & & & \\
+ \midrule
+ Home(Defaults) & MouseBtn1(D) & MouseBtn2(D) & MouseBtn3(D) & End(Defaults) & & \\
+ \midrule
+ \multicolumn{7}{c}{Shuttle Outer Wheel} \\
+ \multicolumn{7}{c}{Play forward (first row) or Play reverse (second row)} \\
+ S1=Stop & S2=1/2 & S3=Normal & S4=2x & S5=4x & S6=8x & S7=16x \\
+ S-1=Stop & S-2=1/2 & S-3=Normal & S-4=2x & S-5=4x & S-6=8x & S-7=16x \\
+ \midrule
+ & & Jog Left & (Inner Wheel) & Jog Right & & \\
+ & & Frame reverse & & Frame forward & & \\
+ & & Scroll up(Defaults) & & Scroll down(Defaults) & & \\
+ \bottomrule
+ \end{tabular}
+ \end{table}
+ \centering
+
+
+
+\end{landscape}
projects / goodguy / cin-manual-latex.git / blobdiff