\begin{figure}[htpb]
\centering
- \includegraphics[width=\linewidth,keepaspectratio]{images/Fenstergrundposition-en.png}
+ \includegraphics[width=\linewidth,keepaspectratio]{Fenstergrundposition-en.png}
\captionsetup{labelformat=empty, textformat=empty}
\caption[The four windows (cc-by-sa Olaf)]{No text}
\label{fig:Fenstergrundposition-en}
\begin{figure}[htpb]
\centering
- \includegraphics[width=1.0\linewidth]{images/patchbay.png}
+ \includegraphics[width=1.0\linewidth]{patchbay.png}
\caption{Patchbay | Timeline with pulldowns, navigation icons, Video/Audio tracks | bottom Zoom Panel}
\label{fig:patchbay}
\end{figure}
It has no function without that flag set.
There are 3 additional pieces of information in the line immediately below the \textit{zoom panel}.
-In the lower left hand corner there could be messages such as "Welcome to Cinelerra" when there is no
+In the lower left hand corner there could be messages such as "Welcome to \CGG{}" when there is no
need to display a red-colored error message or a line that reads "Rendering took H:MM:SS" after a render
has just been completed. Or when working with an auto, a small square the color of that auto line, will be
present along with its keyframe type, location on the timeline, and its current value. This is simply
In cut and paste editing mode, you can also change the position of the insertion point with a simple
left mouse click in the timeline itself.
When moving the insertion point, the position is either aligned to frames or aligned to samples.
-For best results, "Align cursor on frames" when editing a video track and "Align to samples" when editing audio.
+For best results, \textit{Align cursor on frames} when editing a video track and \textit{Align to samples} when editing audio.
Use the pulldown \texttt{Settings$\rightarrow$Align cursor on frames} to change the alignment by
checking the box on for video and off for audio.
\centering
%\includegraphics[width=0.8\linewidth]{name.ext}
\begin{tikzpicture}[scale=1, transform shape]
- \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.6\linewidth]{images/insertion-point.png}};
- \node [yshift=-13mm, xshift=-1cm,anchor=east] at (img1.north west) (Pulldowns) {Pulldowns};
- \node [yshift=-20mm, xshift=-1cm,anchor=east] at (img1.north west) (Transport) {Transport \& Buttons Bar};
- \node [yshift=-25mm, xshift=-1cm,anchor=east] at (img1.north west) (Timebar) {Timebar};
- \node [yshift=-31mm, xshift=-1cm,anchor=east] at (img1.north west) (Title) {Media Title };
- \node [yshift=-40mm, xshift=-1cm,anchor=east] at (img1.north west) (Video) {Video Track};
- \node [yshift=-60mm, xshift=-1cm,anchor=east] at (img1.north west) (Audio) {Audio Track};
- \draw [->, line width=1mm] (Pulldowns) edge ([yshift=-13mm] img1.north west);
- \draw [->, line width=1mm] (Transport) edge ([yshift=-20mm] img1.north west);
- \draw [->, line width=1mm] (Timebar) edge ([yshift=-25mm] img1.north west);
- \draw [->, line width=1mm] (Title) edge ([yshift=-31mm] img1.north west);
- \draw [->, line width=1mm] (Video) edge ([yshift=-40mm] img1.north west);
- \draw [->, line width=1mm] (Audio) edge ([yshift=-60mm] img1.north west);
+ \node (img1) [yshift=0cm, xshift=0cm, rotate=0]
+ {\includegraphics[width=0.6\linewidth]{insertion-point.png}};
+ \node [yshift=-5mm, xshift=-1cm,anchor=east] at (img1.north west) (Pulldowns) {Pulldowns};
+ \node [yshift=-10mm, xshift=-1cm,anchor=east] at (img1.north west) (Transport) {Transport \& Buttons Bar};
+ \node [yshift=-15mm, xshift=-1cm,anchor=east] at (img1.north west) (Timebar) {Timebar};
+ \node [yshift=-20mm, xshift=-1cm,anchor=east] at (img1.north west) (Title) {Media Title };
+ \node [yshift=-28mm, xshift=-1cm,anchor=east] at (img1.north west) (Video) {Video Track};
+ \node [yshift=-46mm, xshift=-1cm,anchor=east] at (img1.north west) (Audio) {Audio Track};
+ \draw [->, line width=1mm] (Pulldowns) edge ([yshift=-5mm] img1.north west);
+ \draw [->, line width=1mm] (Transport) edge ([yshift=-10mm] img1.north west);
+ \draw [->, line width=1mm] (Timebar) edge ([yshift=-15mm] img1.north west);
+ \draw [->, line width=1mm] (Title) edge ([yshift=-20mm] img1.north west);
+ \draw [->, line width=1mm] (Video) edge ([yshift=-28mm] img1.north west);
+ \draw [->, line width=1mm] (Audio) edge ([yshift=-46mm] img1.north west);
\end{tikzpicture}
\caption{Insertion point is at 0:00:25:10 in Hr:Mn:Sec:Frames}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.4\linewidth]{images/i-beam.png}
+ \includegraphics[width=0.4\linewidth]{i-beam.png}
\caption{I-beam + in/out + labels}
\label{fig:i-beam}
\end{figure}
\begin{figure}[htpb]
\centering
\begin{minipage}[h]{0.55\linewidth}
- \center{\includegraphics[width=0.99\linewidth]{images/autocolor-assets_alpha0.png}} \\ a)
+ \center{\includegraphics[width=0.99\linewidth]{autocolor-assets_alpha0.png}} \\ a)
\end{minipage}
\begin{minipage}[h]{0.4\linewidth}
- \center{\includegraphics[width=0.99\linewidth]{images/autocolor-assets_alpha1.png}} \\ b)
+ \center{\includegraphics[width=0.99\linewidth]{autocolor-assets_alpha1.png}} \\ b)
\end{minipage}
\caption{An example of the Autocolor assets}
\label{fig:autocolor_assets_alpha}
\label{sub:window_layouts}
If you like to use different window layouts than the default for certain scenarios, you can setup, save, and load 4 variations.
-First, position your Cinelerra windows where you want them to be and then use the Window pulldown and choose \emph{Save layout}. Note the words \emph{Save layout} highlighted in Figure~\ref{fig:window_layouts}a with 4 names shown to the right and below of that highlight.
+First, position your \CGG{} windows where you want them to be and then use the Window pulldown and choose \emph{Save layout}. Note the words \emph{Save layout} highlighted in Figure~\ref{fig:window_layouts}a with 4 names shown to the right and below of that highlight.
To use the default name of \textit{Layout \#}, when the popup comes up, just click the green checkmark OK on the Layout popup menu.
If you would like a specific name for your layout so you can remember what its best use case is,
keyin 1-8 english characters that are meaningful to you (english characters mean you can not use the German umlaut or the French accent).
\begin{figure}[htpb]
\centering
\begin{minipage}{.49\linewidth}
- \center{\includegraphics[width=1\linewidth]{images/window_layout1.png}}\\ a)
+ \center{\includegraphics[width=1\linewidth]{window_layout1.png}}\\ a)
%TODO High res image replace
\end{minipage}
\begin{minipage}{.49\linewidth}
\vspace{13ex}
- \center{\includegraphics[width=1\linewidth]{images/window_layout2.png}}\\ b)
+ \center{\includegraphics[width=1\linewidth]{window_layout2.png}}\\ b)
%TODO Alpha channel
\end{minipage}
\caption{Window Layouts}
\subsection{Just Playing!}%
\label{sub:just_playing_}
-What if you are just using Cinelerra to play media and listen to tunes?
+What if you are just using \CGG{} to play media and listen to tunes?
After loading your media, just hit the space bar to start playing and then again to stop playing.
Other than that, use the transport buttons on the top bar of the Program window.
Other ways to \textit{play around} are described next.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.99\linewidth]{images/compositor_window.png}
+ \includegraphics[width=0.99\linewidth]{compositor_window.png}
\caption{Left hand side are the toolbar functions / bottom bar has many control functions}
\label{fig:compositor_window}
\end{figure}
when it is finished loading. You should pay attention to this \textit{tally light} when performing
a particularly time-consuming operation so that you do not keep executing more operations
that just have to wait until completion of that CPU intensive operation. Also, you should look
-to see if the light is on before assuming that Cinelerra is hung up.
+to see if the light is on before assuming that \CGG{} is hung up.
When the window is unlocked, meaning that it is not in \textit{Protect video from changes} mode on the
toolbar, MMB clicking and dragging anywhere in the video pans the view. Panning can also
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.99\linewidth]{images/zoom_slider.png}
+ \includegraphics[width=0.99\linewidth]{zoom_slider.png}
\caption{Compositor window zoom slider bar and scroll bars}
\label{fig:zoom_slider}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.5\linewidth]{images/safe_regions.png}
+ \includegraphics[width=0.9\linewidth]{safe_regions.png}
\caption{Note the black outlines showing the safe regions. Also note the Ruler menu}
\label{fig:safe_regions}
\end{figure}
\subsection{Compositing}%
\label{sub:compositing}
-Much of the editing in Cinelerra involves "compositing" which is the combining of visual
+Much of the editing in \CGG{} involves "compositing" which is the combining of visual
elements from different sources into single images. This includes such things as
speeding up and slowing down the video, changing the resolution, creating a split screen, and fading in and out.
Compositing operations are done on the timeline and in the Compositor window using various
operations and other compositing attributes that are available in the Resources window.
-When Cinelerra is performing a compositing operation it plays back through the
+When \CGG{} is performing a compositing operation it plays back through the
compositing engine, but when not, it uses the fastest decoder that it has.
\subsection{The Temporary, Track and Output Sizes}%
\subsubsection*{The Temporary}%
\label{ssub:output_size}
-Cinelerra's compositing routines use a \textit{temporary} which is a single frame of video in
+\CGG{}'s compositing routines use a \textit{temporary} which is a single frame of video in
memory where graphics processing takes place. The size of the temporary and of the output in
the compositing pipeline are different and vary for any particular frame. Effects are processed in
the temporary and as such are affected by the temporary size. In the case of the camera, its
\label{sub:camera_and_projector}
In the compositor window, \textit{Adjust camera automation} and \textit{Adjust projector automation}
-are editing tools to control operation of the camera and projector. In Cinelerra's compositing
+are editing tools to control operation of the camera and projector. In \CGG{}'s compositing
pipeline, the camera determines where in the source the \textit{temporary} is copied from while
the projector determines where in the output the \textit{temporary} is copied to
(figure~\ref{fig:temporary-01}).
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/temporary-01.pdf}
+ \includegraphics[width=0.8\linewidth]{temporary-01.pdf}
\caption{Compositing pipeline}
\label{fig:temporary-01}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/camera_and_projector.png}
+ \includegraphics[width=0.8\linewidth]{camera_and_projector.png}
\caption{Color balance on Temporary}
\label{fig:camera_and_projector}
\end{figure}
These are accessed in the \emph{Show tool info} window .
Most operations in the Compositor window have a tool window which is enabled by activating the question mark icon (figure~\ref{fig:camera_tool}).
-\begin{wrapfigure}[12]{O}{0.3\linewidth}
+\begin{wrapfigure}[11]{O}{0.3\linewidth}
\vspace{1ex}
- \includegraphics[width=0.9\linewidth]{images/camera_tool.png}
+ \includegraphics[width=0.9\linewidth]{camera_tool.png}
\caption{Camera and Projector tool}
\label{fig:camera_tool}
\end{wrapfigure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.7\linewidth]{images/temporary-02.pdf}
+ \includegraphics[width=0.7\linewidth]{temporary-02.pdf}
\caption{Compositing pipeline with mask}
\label{fig:temporary-02}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.5\linewidth]{images/mask_window.png}
+ \includegraphics[width=0.5\linewidth]{mask_window.png}
\caption{Mask options window}
\label{fig:mask_window}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.7\linewidth]{images/cropped_area.png}
+ \includegraphics[width=0.9\linewidth]{cropped_area.png}
\caption{Crop menu and outlined crop rectangle on the right side}
\label{fig:cropped_area}
\end{figure}
\label{sec:viewer_window}
The Viewer window (figure~\ref{fig:viewer_window}) is convenient for previewing your media and
-clips as well as for Two Screen Editing as explained in \ref{sec:two_screen_editing}. There are
-transport buttons to use same as in the Program and Compositor windows or you can quickly move
-through the media by dragging with the LMB in the timebar above the transport buttons. It is useful
-for cutting and pasting sections onto the timeline or to create a clip.
+clips. It can also be used for editing with cuts and then paste operations into the timeline or
+to create a clip. There are transport buttons to use in the same manner as in the Program
+and Compositor windows or you can quickly move through the media by dragging with the LMB in
+the timebar above the transport buttons.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.99\linewidth]{images/viewer_window.png}
- \caption{Viewer Window}
+ \includegraphics[width=0.99\linewidth]{viewer_window.png}
+ \caption{Viewer Window - note the green/white arrow "Play" button left of 001484}
\label{fig:viewer_window}
\end{figure}
-In order to view media in the display, you have to load it as follows:
+In order to view media in the window, you have to load it as follows:
\begin{enumerate}
\item In the Resources window, highlight the Media folder or the Clip folder.
\item Drag a file from the folder to the Viewer.
- \item Or highlight an asset, RMB to bring up choices, and click on \textit{View} or
+ \item \textbf{Or} double LMB click on a media asset.
+ \item \textbf{Or} highlight an asset, RMB to bring up choices, and click on \textit{View} or
\textit{View in new window}.
\end{enumerate}
-After the media is loaded you can use the transport buttons to play, rewind, stop, etc. or for fast
-previewing, drag with the LMB anywhere on the timebar slider. A few more options available in the
-Viewer window can be accessed with a RMB click on the display. These functions are listed next.
+Note that you can have multiple Viewer windows open with different or even the same media asset.
+After the media is loaded you can use the transport buttons to play, rewind, stop, and so on, or
+for fast previewing drag with the LMB anywhere on the timebar slider. A few more options
+available in the Viewer window can be accessed with a RMB click on the display. These functions
+are listed next.
\begin{enumerate}
\item Switch to a fullscreen display by choosing \textit{Fullscreen}. To switch back, click
with the RMB on the display again and choose \textit{Windowed}.
\item Change the display size by choosing the \textit{Zoom} function to select a zoom level of
-25\%, 33\%, ... 300\% or 400\% of the original media size.
+25\%, 33\%, ... 300\%, or 400\% of the original media size.
\item To remove the current media from being displayed, choose \textit{Close source}.
\end{enumerate}
-The Viewer uses the project's output size format settings to display the media instead of the original
-assets format. Operations performed in the Viewer affect a temporary EDL or a clip rather than the
-timeline. By default the Viewer window is automatically available but if it gets accidentally
-closed you can open it again by using \texttt{Window $\rightarrow$ Show Viewer} to bring it back up.
+The Viewer uses the project's output size format settings to display the media instead of the
+original asset's format. Operations performed in the Viewer affect a temporary EDL or a clip rather
+than the timeline. By default, the Viewer window is automatically available but if it gets
+accidentally closed you can open it again by using the pulldown \texttt{Window $\rightarrow$ Show
+Viewer} to bring it back up. More details for editing in the Viewer window with the Two Screen
+Editing method is explained in \ref{sec:two_screen_editing}.
\section{Options in both the Compositor and Viewer Windows}%
\label{sec:options_in_both_the_compositor_and_viewer_windows}
\subsection{Click to Play in Viewer and Compositor}%
\label{sub:click_to_play_in_viewer_and_compositor}
-In both the Viewer and Compositor windows, there is an arrow on the right hand side of the other buttons in the edit panel.
-Mouse action can be toggled on/off via this arrow, which has a tooltip of \textit{Click to play} with the letter "\texttt{P}" to be used for a shortcut.
-When enabled there is a gold-colored shadow around the usual green-colored arrow.
-The purpose of enabling this capability is to make it really easy to play the media in the window by just using the left mouse button to start or stop the play.
-The entire main canvas surface becomes a big play button!
-Although the default is initially off, a good reason to enable this, at least temporarily, is so that you can quickly review your video before a render.
+In both the Viewer and Compositor windows, there is an arrow on the right hand side of the other
+buttons in the edit panel as shown in figure~\ref{fig:viewer_window}. The "play" button can be
+toggled on/off via this arrow, which has a tooltip of \textit{Click to play}. When enabled there
+is a green or gold colored shadow around the usual red or green colored arrow.
+The purpose of enabling this capability is to make it really easy to play the media in the window
+by just using the left mouse button to start or stop the play. The entire main canvas surface
+becomes a big play button! Although the default is initially off, a good reason to enable this,
+at least temporarily, is so that you can quickly review your video before a render.
\begin{description}
- \item[left click] forward play or stop forward play if already playing
+ \item[left click] forward play or stop forward play if already playing
\item[middle wheel] single frame forward or back
- \item[middle click] reverse play or stop reverse play if already playing.
+ \item[middle click] reverse play or stop reverse play if already playing.
Note that some 3 button mice do not accommodate a middle click for reverse but you can find out by testing from a terminal window with the command \texttt{xev}.
\end{description}
\subsection{Timebar + Preview Region Usage in the Compositor and Viewer}%
\label{sub:timebar_preview_region_usage_in_the_compositor_and_viewer}
-The navigation features of the Viewer and Compositor behave very similarly.
-Each has a timebar and slider below the video output.
-The timebar represents the entire time covered by the program.
-When you have a file loaded in the main window and then slide around it using the compositor slider. The insertion point in the main window follows the compositor.
+The Viewer and Compositor each have a timebar control area with an indicator line below the video
+output. The \textit{timebar} shows the whole time covered by the program. When a video asset
+is loaded in the main window and you move in the compositor, the insertion pointer in the main
+window will reflect those movements. However, this is not the case with the viewer. In the viewer
+only that specific media is shown and there is no corresponding movement on the timeline.
-Labels and In/Out points are fully supported in the viewer and compositor.
-In the viewer and compositor, labels and in/out points are displayed in the timebar.
-But there is a difference between the viewer and compositor in that the compositor reflects the state of the program while the viewer reflects the state of a clip but not the program.
-When you hit the label button in the compositor, the label appears both in the compositor timebar and the program timebar.
-When you select a label or in/out point in the compositor, the insertion point in the program window jumps to that position.
+Both the Compositor and Viewer support labels and in/out pointer which are displayed in the timebar.
+And as with the movements, when you use the labels or in/out pointer in the compositor timebar,
+the result will also be reflected in the main window timebar. Along with that, of course, when
+you move to a label or in/out pointer in the compositor, the insertion point in the program window
+will go to that position.
The timebar in the compositor and the viewer can be used to define a region known as the \textit{preview region}.
This preview region is the region of the timeline which the slider affects.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/timebar1.png}
+ \includegraphics[width=1.0\linewidth]{timebar1.png}
\caption{The arrow above the green colored “play forward” transport button is on the timebar.}
\label{fig:timebar1}
\end{figure}
To create and use a preview region, hold down the right mouse button inside the timebar on either end of the timebar close to the edge until you see the resize pointer.
While continuously holding the right mouse button down, drag the arrow away from the end towards the middle of the timebar until you have the desired area outlined.
-The slider will be a light blue color while the selected preview region will remain the same initial black color.
+The slider will be a dark red color while the selected preview region will remain the same initial black color.
There are either a left or right resize pointer and you can click and drag in either direction to expand or shrink the region.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/timebar2.png}
+ \includegraphics[width=1.0\linewidth]{timebar2.png}
\caption{ A left-facing arrow on the right side of the blue slider bar is used to drag the bar.}
\label{fig:timebar2}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/timebar3.png}
+ \includegraphics[width=1.0\linewidth]{timebar3.png}
\caption{Here you can see the right-facing arrow used to drag the other end of the slider bar.
The black area between is the actual preview area.}
\label{fig:timebar3}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/timebar4.png}
+ \includegraphics[width=1.0\linewidth]{timebar4.png}
\caption{Note the double-headed fat arrow in the preview area used to move the selection over.}
\label{fig:timebar4}
\end{figure}
preview region may appear to either move, shrink, or grow depending on the new length of the
media on the timeline.
\item To disable the preview region, you will have to drag both the right and the left blue slider bars
- completely to their corresponding end so that there is no longer any visible blue slider.
+ completely to their corresponding end so that there is no longer any visible red slider.
\end{enumerate}
A good method for taking advantage of the preview region is described here.
On the main track canvas, scroll to the beginning of the area of interest.
When you do that, you will see in the compositor the red indicator line of that location.
-Now in the compositor window, right mouse drag from the left side of the edge of the timebar to create the blue slider bar line up to the red indicator.
+Now in the compositor window, right mouse drag from the left side of the edge of the timebar to create the dark red slider bar line up to the red indicator.
Back in the main track canvas, move to the location of the area you want to end looking and again you will see the red indicator line in the compositor.
Use the right mouse drag from the right to stop at that end point. Using this method is often easier than continuous usage of the single frame move which can be tedious.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.7\linewidth]{images/resource_window.png}
+ \includegraphics[width=0.8\linewidth]{resource_window.png}
\caption{Folders are in the first column with contents of that folder on the right hand side}
\label{fig:resource_window}
\end{figure}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.99\linewidth]{images/info_asset_details.png}
+ \includegraphics[width=0.99\linewidth]{info_asset_details.png}
\caption{The “Detail” box}
\label{fig:info_asset_details}
\end{figure}
\item In the Resources window (figure~\ref{fig:folder_resources}), in the location of the Video/Audio effects and Media folders, bring up the \textit{Folder}$\dots$ popup by clicking the right mouse button.
Highlight, then click \textit{New Media or Clips}.
\begin{figure}[htpb]
- \begin{minipage}{.55\linewidth}
+ \begin{minipage}{.6\linewidth}
\centering
- \includegraphics[width=0.9\linewidth]{images/folder_resources.png}
+ \includegraphics[width=0.9\linewidth]{folder_resources.png}
\caption{Highlight, then click “New Media or Clips”.
“Modify folder” can be used to change the name of a folder.
“Delete folder” in the popup can be used to delete a folder.
\label{fig:folder_resources}
\end{minipage}
\hfill
- \begin{minipage}{.35\linewidth}
+ \begin{minipage}{.37\linewidth}
\centering
\vspace{18ex}
- \includegraphics[width=0.9\linewidth]{images/folder_new.png}
+ \includegraphics[width=0.9\linewidth]{folder_new.png}
\caption{Type in your folder name in the textbox. Click OK.}
\label{fig:folder_new}
\end{minipage}
\end{figure}
\item In the \textit{New folder} popup as shown below (figure~\ref{fig:folder_new}), type in your folder name in the textbox. Click OK.
- \begin{figure}[htpb]
- \centering
- \end{figure}
+ \begin{figure}[htbp]
+ \centering
+ \includegraphics[width=0.9\linewidth]{folder_master.png}
+ \caption{The “master” Media folder}
+ \label{fig:folder_master}
+ \end{figure}
\item Select the \textit{master} Media folder to see which files are currently loaded, figure~\ref{fig:folder_master}.
Highlight the files there that you want to copy to your new folder (named Photos of Garden).
Drag the files to the left and when you see the Photos of Garden folder become highlighted, then drop there.
It flashes when the drop is successful.
\end{enumerate}
-\begin{figure}[htbp]
- \centering
- \includegraphics[width=0.7\linewidth]{images/folder_master.png}
- \caption{The “master” Media folder}
- \label{fig:folder_master}
-\end{figure}
-
Adding the Shift key before the actual drop, will allow for relative path filenames instead of full path.
But you might want to include or eliminate some of the media that exists in one of the folders that you have set up already.
In this case you will want to click on the \textit{Modify folder} in the popup.
\centering
%\includegraphics[width=0.8\linewidth]{name.ext}
\begin{tikzpicture}[scale=1, transform shape]
- \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.7\linewidth]{images/folder_modify.png}};
- \node [yshift=-31mm, xshift=-1cm,anchor=east] at (img1.north west) (Arrow1) {\parbox{8em}{Here is the filter that was generated with the original drop }};
- \node [yshift=-85mm, xshift=0cm,anchor=east] at (img1.north west) (Arrow2) {\parbox{10em}{When you click on the Value portion of that filter, the entire set of files that are covered by the filter rules pops up. Now you can highlight a target filename that you would like to remove, and just erase that line and check the green checkmark for OK.}};
- \draw [->, line width=1mm] (Arrow1) edge ([yshift=-31mm] img1.north west);
+ \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.7\linewidth]{folder_modify.png}};
+ \node [yshift=-20mm, xshift=-1cm,anchor=east] at (img1.north west) (Arrow1) {\parbox{8em}{Here is the filter that was generated with the original drop }};
+ \node [yshift=-65mm, xshift=0cm,anchor=east] at (img1.north west) (Arrow2) {\parbox{10em}{When you click on the Value portion of that filter, the entire set of files that are covered by the filter rules pops up. Now you can highlight a target filename that you would like to remove, and just erase that line and check the green checkmark for OK.}};
+ \draw [->, line width=1mm] (Arrow1) edge ([yshift=-20mm] img1.north west);
\end{tikzpicture}
\caption{Modify target}
\centering
%\includegraphics[width=0.8\linewidth]{name.ext}
\begin{tikzpicture}[scale=1, transform shape]
- \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.6\linewidth]{images/modify_folder1.png}};
- \node (img2) [yshift=-1cm, xshift=4cm, rotate=0] at (img1) {\includegraphics[width=0.6\linewidth]{images/modify_folder2.png}};
- \node (img3) [yshift=-1cm, xshift=3cm, rotate=0] at (img2){\includegraphics[width=0.3\linewidth]{images/modify_folder3.png}};
+ \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.8\linewidth]{modify_folder1.png}};
+ \node (img2) [yshift=-1cm, xshift=3.5cm, rotate=0] at (img1) {\includegraphics[width=0.8\linewidth]{modify_folder2.png}};
+ \node (img3) [yshift=-1cm, xshift=3cm, rotate=0] at (img2){\includegraphics[width=0.5\linewidth]{modify_folder3.png}};
\end{tikzpicture}
\caption{The available choices for each field}
\label{fig:modify_folder}
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.99\linewidth]{images/vicons1.png}
+ \includegraphics[width=0.99\linewidth]{vicons1.png}
\caption{Note "Full Play" mode and Vicons and Aicons in Media folder}
\label{fig:vicons1}
\end{figure}
-The waveform in the figure~\ref{fig:vicons2} is displayed in the Resources window in the color green/yellow for the 2 audio tracks.
+The waveform in the figure~\ref{fig:vicons2} is displayed in the Resources window in the color green for the 3 audio tracks.
There is a colored bar on the top of each a-icon where the color is based on the Color Spectrum -- the smaller the time duration, the redder the color; then as the time duration goes up, the color goes up so that you will go to green, then yellow, then blue, then really dark blue, then purple for the audio files 1 hour and over.
There are various other colors between these colors same as that seen in the color spectrum in the screenshot below.
Colors are utilized from the hue wheel in the counter-clockwise direction.
\centering
%\includegraphics[width=0.8\linewidth]{name.ext}
\begin{tikzpicture}[scale=1, transform shape]
- \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.99\linewidth]{images/vicons2.png}};
- \node (img2) [yshift=0cm, xshift=2.8cm, rotate=0] at (img1.south west) {\includegraphics[width=0.3\linewidth]{images/hue_wheel.png}};
+ \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.99\linewidth]{vicons2.png}};
+ \node (img2) [yshift=0cm, xshift=2.8cm, rotate=0] at (img1.south west) {\includegraphics[width=0.3\linewidth]{hue_wheel.png}};
\node [yshift=-5mm, xshift=1cm,anchor=west] at (img2.east) (Arrow1) {\parbox{18em}{Color hue wheel. For illustration only}};
\draw [->, line width=1mm] (Arrow1) edge ([yshift=-5mm] img2.east);
\end{tikzpicture}
Preview mode can be used to pop up a window which draws the vicons/aicons thumbnails in a larger size.
-Preview or \textit{draw vicons} mode is a helpful feature of Cinelerra that lets you see and/or hear the first 5 seconds of the video for identification purposes.
+Preview or \textit{draw vicons} mode is a helpful feature of \CGG{} that lets you see and/or hear the first 5 seconds of the video for identification purposes.
The Preview mode/playback toggle is to the right of the Visibility label as seen in the screenshot above.
Preview mode is available for the Media, Proxy, Media User Bins, and Clips but clips are only 1 image.
\begin{figure}[htpb]
\begin{minipage}{.69\linewidth}
\centering
- \includegraphics[width=0.99\linewidth]{images/preview_icon_mode.png}
+ \includegraphics[width=0.99\linewidth]{preview_icon_mode.png}
\caption{The location of the Preview/Draw Icons mode.}
\label{fig:preview_icon_mode}
\end{minipage}
\begin{minipage}{.29\linewidth}
\vspace{2ex}
\centering
- \includegraphics[width=0.7\linewidth]{images/line_through_mode.png}
+ \includegraphics[width=0.7\linewidth]{line_through_mode.png}
\caption{Note the line through the mode.}
\label{fig:line_through_mode}
\end{minipage}
\subsection{Moving clips/media from/to Resources window}%
\label{sub:moving_clips_media_from_to_resources_window}
-If you have several media files loaded into the Resources window of one instance of Cinelerra and want to load some of the same ones into another instance or just want a listing to save in a file for later use, you can do this with these set of steps:
+If you have several media files loaded into the Resources window of one instance of \CGG{} and want to load some of the same ones into another instance or just want a listing to save in a file for later use, you can do this with these set of steps:
Copy or paste a list of files in the Media Resources window:
\item right click on an unused portion of that window to bring up the popup menu
\item select the \textit{Copy file list} item and a file list box will appear that contains the full path filenames
\item wipe the textbox using your standard copy/paste method to put the list of files in the copy buffer
- \item in another Cinelerra instance, choose the \textit{Paste file list} of the media Resources window
+ \item in another \CGG{} instance, choose the \textit{Paste file list} of the media Resources window
\item paste the list of files, again using your standard paste method, into the new file list box; press OK
\item the status bar of the main window will be updated as the file list is loaded to the media folder (the purpose of displaying the status is simply to show that the load is progressing normally).
\end{enumerate}
-Obviously this \textit{Paste file list} feature means you can create a list of files outside of Cinelerra using an editor, wipe the names, and then use \textit{Paste file list} to load them into the media Resources window.
+Obviously this \textit{Paste file list} feature means you can create a list of files outside of \CGG{} using an editor, wipe the names, and then use \textit{Paste file list} to load them into the media Resources window.
-It is important to note that in the steps above, the Operating System cut and paste capabilities are in use for steps 4 and 6 as opposed to Cinelerra’s c/v shortcuts.
+It is important to note that in the steps above, the Operating System cut and paste capabilities are in use for steps 4 and 6 as opposed to \CGG{}’s c/v shortcuts.
Since the procedure varies among the distros, you will have to adapt to your specific one. For example, a usage for ubuntu consists of:
\begin{enumerate}
\setcounter{enumi}{3}
\begin{figure}[htpb]
\centering
- \begin{minipage}{.49\linewidth}
+ \begin{minipage}{.9\linewidth}
\centering
- \includegraphics[width=0.99\linewidth]{images/copy_files1.png}
+ \includegraphics[width=0.99\linewidth]{copy_files1.png}
\end{minipage}
- \hfill
- \begin{minipage}{.49\linewidth}
+ \vfill
+ \begin{minipage}{.5\linewidth}
\centering
- \includegraphics[width=0.99\linewidth]{images/copy_files2.png}
+ \includegraphics[width=0.99\linewidth]{copy_files2.png}
\end{minipage}
\caption{Example of copy file list}
\label{fig:copy_files1}
\end{figure}
-In the Figure~\ref{fig:copy_files1}, one instance of Cinelerra has 6 items in the Media area highlighted that were copied to the file list.
+In the Figure~\ref{fig:copy_files1}, one instance of \CGG{} has 3 items in the Media area highlighted that were copied to the file list.
Note how it includes the full pathname.
-In this screenshot on another instance of Cinelerra, there are only 2 items in the media but the \textit{Paste file list} box is ready to have the items inserted via the standard text box paste method. When that is done, the additional 6 media files will be available on this other instance too.
+In this screenshot on another instance of \CGG{}, there are only 2 items in the media but the \textit{Paste file list} box is ready to have the items inserted via the standard text box paste method. When that is done, the additional 6 media files will be available on this other instance too.
Another possible usage of this capability:
\centering
\begin{minipage}{.49\linewidth}
\centering
- \includegraphics[width=0.8\linewidth]{images/snapshot.png}
+ \includegraphics[width=0.8\linewidth]{snapshot.png}
\caption{Snapshot menu and choices}
\label{fig:snapshot}
\end{minipage}
\begin{minipage}{.49\linewidth}
\centering
\begin{tikzpicture}[scale=1, transform shape]
- \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.65\linewidth]{images/grabshot.png}};
- \node (img2) [yshift=2cm, xshift=-1cm, rotate=0] {\includegraphics[width=0.07\linewidth]{images/reticle.png}};
+ \node (img1) [yshift=0cm, xshift=0cm, rotate=0] {\includegraphics[width=0.65\linewidth]{grabshot.png}};
+ \node (img2) [yshift=2cm, xshift=-1cm, rotate=0] {\includegraphics[width=0.07\linewidth]{reticle.png}};
\end{tikzpicture}
\caption{Grabshot reticle \& orange box}
\label{fig:grabshot_recticle}
Thus, by playing back you change the position of the insertion point.
The keyboard interface of either the numeric pad or alternative keys has more speeds with the addition of \emph{Forward Slow}(2) and \emph{Reverse Slow} (5).
Hitting any key on the keyboard twice pauses it.
-The shortcuts section of this manual as well as a Shell Command available from the Cinelerra main window has a listing of each of the keys.
+The shortcuts section of this manual as well as a Shell Command available from the \CGG{} main window has a listing of each of the keys.
When using frame advance functions the behavior may seem odd.
If you frame advance forward and then frame advance backward, the displayed frame does not change.
In zoom mode, clicking in the video output zooms in while a Ctrl-click in the video output zooms out.
If you have a wheel mouse, rotating the wheel zooms in or out too.
Zooming in or out with the zoom tool does not change the rendered output.
-It is merely for scrutinizing video or fitting it in the desktop. Playing video on the compositor when zoomed to any size other that 100\%, the original size, requires Cinelerra to do extra processing steps.
+It is merely for scrutinizing video or fitting it in the desktop. Playing video on the compositor when zoomed to any size other that 100\%, the original size, requires \CGG{} to do extra processing steps.
This could affect performance on slower systems
\subsection{Show Overlays}%
There is a line separating the first 4 items, which are just non-automation type settable values as opposed to \textit{auto} keyframe types.
The color is not changeable for the 3 items of Mode, Pan, and Mask which simply display their symbol icon.
-Screenshot below displays the Show overlays popup with all of its options and color coded types such as yellow for Speed and blue for Camera Z.
+Figure~\ref{fig:overlays_window} displays the Show overlays popup with all of its options and color coded types such as yellow for Speed and blue for Camera Z.
Upon clicking on the associated \textit{color ball} to the right of any keyframe type, for example \textit{Fade} in this screenshot, the color wheel palette window pops up so that you can manipulate the color as desired.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.99\linewidth]{images/overlays_window.png}
+ \includegraphics[width=0.85\linewidth]{overlays_window.png}
\caption{Show Overlays window on the left with the Color ball window to the right to set color}
\label{fig:overlays_window}
\end{figure}
-Screenshot below shows several color coded lines for different keyframes along with the Fade slider for manipulation.
+Figure~\ref{fig:overlays1} shows several color coded lines for different keyframes along with the Fade slider for manipulation.
The slider is in the same color as the color coded keyframe type line which is the same color as in the \textit{Show overlays} window.
\begin{figure}[htpb]
\centering
- \includegraphics[width=0.8\linewidth]{images/overlays1.png}
+ \includegraphics[width=1.0\linewidth]{overlays1.png}
\caption{Lines are colored here on the timeline as designated in Show Overlays}
\label{fig:overlays1}
\end{figure}
\begin{figure}[htpb]
\begin{minipage}{.29\linewidth}
\centering
- \includegraphics[width=0.99\linewidth]{images/overlays_list1.png}
+ \includegraphics[width=0.99\linewidth]{overlays_list1.png}
\caption{Original Settings --- cool spot}
\label{fig:overlays_list1}
\end{minipage}
\hfill
\begin{minipage}{.29\linewidth}
\centering
- \includegraphics[width=0.99\linewidth]{images/overlays_list2.png}
+ \includegraphics[width=0.99\linewidth]{overlays_list2.png}
\caption{Note Titles box hot spot }
\label{fig:overlays_list2}
\end{minipage}
\hfill
\begin{minipage}{.29\linewidth}
\centering
- \includegraphics[width=0.99\linewidth]{images/overlays_list3.png}
+ \includegraphics[width=0.99\linewidth]{overlays_list3.png}
\caption{Cam/Proj XYZ toggle to fine tune}
\label{fig:overlays_list3}
\end{minipage}
The levels window displays the output audio levels after all mixing is done.
The visible range of the sound level meters is configurable in \texttt{Settings $\rightarrow$ Preferences, Interface tab} under the Operations section.
-\begin{wrapfigure}[16]{O}{0.3\linewidth}
- \centering
- %\vspace{-4ex}
- \includegraphics[width=0.5\linewidth]{images/volume_meter.png}
- \caption{Sound Level Meters Window}
- \label{fig:volume_meter}
-\end{wrapfigure}
-
Sound level meters can be toggled in the viewer and compositor windows with the show meters button.
They also appear in the patchbay when the track is expanded and in the recording monitor when audio is being recorded.
In the patchbay they are the sound levels for each track after all effects are processed and before down-mixing for the output.
Most of the time, audio levels have numerical markings in dB but in the patchbay there is not enough room.
-
+\begin{wrapfigure}[15]{O}{0.3\linewidth}
+ \centering
+ \vspace{-4ex}
+ \includegraphics[width=0.5\linewidth]{volume_meter.png}
+ \caption{Sound Level Meters Window}
+ \label{fig:volume_meter}
+\end{wrapfigure}
The sound level is color coded as an extra means of determining the sound level.
Even without numerical markings, the sound level color can distinguish between several ranges and overload.
Look at the color codings in a meter with numerical markings to see what colors correspond to what sound level.
Then for meters in the patchbay in expanded audio tracks, use the color codings to see if it is overloading.
-Be aware that sound levels in Cinelerra can go above 0 dB.
+Be aware that sound levels in \CGG{} can go above 0 dB.
This allows for not only seeing if a track is overloading but how much information is being lost by the overloading.
Overloading by less than 3 dB is usually acceptable.
-While overloading is treated as positive numbers in Cinelerra, it is clipped to 0 when sent to a sound card or file.
+While overloading is treated as positive numbers in \CGG{}, it is clipped to 0 when sent to a sound card or file.
projects / goodguy / cin-manual-latex.git / blobdiff